74/EDCT/2025-26

Electrical Items :

Holding Clamp J-I hook for AB cable

STAY CLAMP FOR SP-21 WITH NUT & BOLT

STAY CLAMP FOR SP-23 WITH NUT & BOLT

STAY CLAMP FOR SP-10 WITH NUT & BOLT

EARTH WIRE CLAMP FOR SP-23 WITH N/B

DEAD END CLAMPS WITH I HOOK AND N/B INS

PP & CLAMP WITH N&B ST POLE SP-23

Susp. Clamp With I Hook (Ins.),Clamp,N&B

BRACING CLAMP TOP FOR SP-23 WITH N/B

BRACING CLAMP BOTTOM FOR SP-23 WITH N/B

Connecting Cable AB Cable to DB 1x25sqmm

Head shrink type end caps for LT ABC

Piercing Connector 70 Sq.mm-70Sq.mm

Piercing Connector 35 Sq.mm-35Sq.mm

INSULATED PIERCING CONNECTOR 50-50 SQ.MM

LT XLPE Cable 1x35 sqmm

LT XLPE AB CABLE 3X95+1X50 SQ.MM.

LT AB Cable 3x70+1x50 sqmm

LT AB Cable 3x35+1x25 sqmm

LT XLPE AB CABLE 1CX16+25 SQ.MM.

LT AB CABLE 3CX50+1X35 SQ.MM

LT DISTRIBUTION BOX 1 PHASE

LT DISTRUBITON BOX 3 PHASE

AL CRIMPING TYPE LUGS 25 SQ.mm

LABOUR(SERVIES)

CHEMICAL EARTHING

ERECTION OF EARTHING ROD

FABRICATION OF STEEL

EXCAVATION OF PIT FOR STAY SET

ERECTION OF LT STAY SET

ERECTION OF 11 KV STAY SET

GROUTING OF STAY SET

EXCAVATION OF PIT FOR POLE

ERECTION OF SINGLE SP-10 POLE

ERECTION OF SINGLE SP-21 POLE

ERECTION OF SINGLE SP-23 POLE

ERECTION OF SP-23 DOUBLE POLE

GROUTING OF POLE

MUFFING OF POLE

DISMANTLING OF SP-10 SINGLE POLE

DISMANTLING OF SP-21/SP-23 SINGLE POLE

DISMANTLING OF 11 KV LINE(RABBIT)

DISMANTLING OF LT LINE 1 P 2 W(WEASEL)

DISMANTLING OF LT LINE 3 P 4 W(WEASEL)

DISMANTLING OF 16 KVA DTR

DISMANTLING OF 25 KVA DTR

INST. OF 63 KVA DTR ON POLE STRUCTURE

INST. OF 25 KVA DTR ON POLE STRUCTURE

FIXING OF TPMO

FIXING OF LIGHTNING ARRESTOR

LAYING OF RABBIT CONDUCTOR IN HT LINE

LOPPING & CHOPPINGOF TREE BRANCHES

CARTAGE SP-10 POLE, 151-200KM

CARTAGE SP-21/23 POLE, 151-200KM

CARTAGE OF PETTY MATERIAL,151-200KM

CARTAGE OF 16/25 KVA DTR, 151-200KM

CARTAGE OF 63 KVA DTR, 151-200KM

HEADLOAD CARTAGE SP-10 POLE(0-1 KM)

HEADLOAD CARTAGE SP-10 POLE(1-3 KM)

HEADLOAD CARTAGE SP-21/23 POLE(0-1 KM)

HEADLOAD CARTAGE SP-21/23 POLE(1-3 KM)

HEADLOAD CARTAGE OF MATERIAL(0-1 KM)

HEADLOAD CARTAGE OF MATERIAL(1-3 KM)

HEADLOAD CARTAGE OF 16 KVA DTR(0-1 KM)

HEADLOAD CARTAGE OF 25 KVA DTR(0-1 KM)

HEADLOAD CARTAGE OF 63 KVA DTR(0-1 KM)

DISCONNECTION & RECONNECTION OF CONsumer

LAYING OF LT AB CABLE 3X70+1X50 SQMM

LAYING OF LT AB CABLE 3X35+1X25 SQMM

INSTALLATION OF LT DB 1 PH FOR LT AB

INSTALLATION OF LT DB 3 PH FOR LT AB CAB

LAYING OF AB CABLE 1X16+25 MM

FIXING OF HEAT SHRINK CAP FOR AB CABLE

BACK CARTAGE OF PETTY MATERIAL,151-200KM

LAYING AND FIXING OF 1X35SQMM XLPE CABLE

BACK HEAD LOAD CART. OF PETTY MAT. 0-1KM

BACK HEAD LOAD CART. OF PETTY MAT. 1-3KM

DISMANTLING OF LT XLPE CABLE 1CX16+25

LAYING OF LT AB CABLE 3CX50+1X35

LAYING OF LT XLPE ABC 3X95+1X70+16 SQ.MM

Please Enable Macros to View BoQ information

PQR PART-1 SHEET For Tender No. 74/EDCT/2025-26

PART -I OPENED ON DATE 27-02-2026 AT 12:00 HRS

Full Postal Address of Tenderers (Head Office)

Works Address

Contact No.

Email:- ID

The Bidder must have valid class A Electrical Contractor license issued by Uttarakhand State Authority.

The Bidders have successfully executed construction of LT/higher voltage line 3 Km. for UPCL/Power Sector Utilities during the last 5 year as on the date of bid opening. Bidder shall provide Certificate for the same issue from UPCL/SEB’s Power Utilities.

Minimum Average Annual Turnover (MAAT) of the bidder for three best of five financial years (i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25) should not be less than 153.00 Lacs. Bidder shall submit Audited Balance sheet of the same along with the bid.

The bidder must have valid registration in labor department, income tax, EPF, ESI /GST and other related agencies/departments as per prevailing law. Bidder shall provide documentary evidence for the same.

The tenderer must have active GST registration.

An undertaking on Rs 100/- non judicial stamp paper duly notarized by that the bidder has not been blacklisted/ debarred by any Govt. undertaking/Govt. Departments / SEB’s/ Power Sector Utilities. In case same is found then their tender/order shall be treated as cancelled at any stage and EMD/Performance security shall be forfeited.

Bidder must submit validity of offer for 180 days from the date of opening of tender on 100/- stump paper along with Rs1/- revenue stamp (as per sheet enclosed)(hard copy of the same must be submitted).

Completion Period:- The Completion period of the work shall be 3 from issue of Transformer.

Earnest money (Rs.153000.00) in shape of BG/DD/FDR/CDR should be vaild for 180 days from the date of opening of tender + 45 days claim periods.(hard copy of the same must be submitted).

Whether bidder is Registered in MSME

Any other information regarding financial and organization capabilities etc. to ascertain your capacity to complete the project in time.

Any deviation.

Singature of Bidder