Construction of Laldhang Water Supply Scheme of Haridwar Including Supply Installation testing and commissioning of Rising Main Distribution System Construction of Pump House Clear Water Reservoir Drilling Development of Tube well all

Amount

1.0 Tube Well (Source) & Related Components

Transportation of Rig Machine, Air Compressor, O P Unit and camp equipages, connected T&P and necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Errection and leveling of ring machine and barricading at site of work `

Dismantling of ring machine and clearance of site after satisfactory completion of work

Drilling of Borehole from GL to 100 mtr. BGL

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply & lowering of 300mm dia MS ERW fincut 7.9mm thick plain pipe

Supply & lowering of 300mm dia MS ERW fincut 7.9mm thick slotted pipe

Supply & fixing of 300mm dia, 8mm thick tubewell cap.

Supply & fixing of 300mm dia M.S.D. housing clamp and Grider set.

Supply & fixing of 300 mm dia Bail plug.

Supply & shrouding of pea gravel in between bore & tube well assembly to the entire depth of tube well.

Development of tubewell by 350 PSI/1100 CFM Air compressor

Development of tubewell by the suitable capacity O.P. unit including supply & installation of pumping plant.

Geohydrological survey of site

Chemical & bacteriological testing of water sample

Pump & Related electrical items

Supply of Submersible Pump sets of various duty parameters, IS:8034 (2002)

Supply of Energy Efficient Submersible Pumpsets of various duty parameters, Make KSB

Pump of 1500 LPM dischage at 60 m head with 25 HP electric motor (TW-1 to OHT-1)

Supply and installation of Dry Auto transformer start ATS type starter cum panel for submersible motors incluing capacitor . For operation on 400 volts+/- 10% three phase 50 c/s AC supply complete with Cu bus bar, internal interconnection and comprising of AUTO TRANSFORMER STARTER, Electronic over load, Single phasing, reverse phasing protection relays and under and under voltage protection,with Metering & Protection calss CT, Time Delayed Capacitor duty contactor operated LT power capacitor, single phase preventor, indicating lamp, door switch with complete internal connection by copper wire & should be suitable toi integrate Multi function power meter for following duties of Pump motors.

Pumping Plant accessories for tube wells including earthing materials per unit estimate complete.

Supply, testing, tagging, terminating and jointing of 3 core flat cable with bare bunched copper conductor insulated with PVC and sheathed with PVC for submersible pump motors with Voltage grade upto 1100 V generally confirming to IS 694-2010 with latest amendments of the following size.

35 Sqmm 3 Core

SITC of Main Incomer panel comprising of TPN MCCB of rating suitable of following rating with Three phase volt meter, Amp. Meter, CT, Mains indicating lamps etc.

Auto Phase correction unit for following ratings

Supply, testing, tagging, terminating and jointing of XLPE insulated PVC sheathed cable of 1.1 KV grade with Aluminium conductors armoured as per IS 7098-I including terminations at both ends, testing, commissioning at site as per spcifications, complete in all respects

Earthing of complete electrical equipment (GI Earth strip, GI earth plate etc. including digging of pit & Complete earthing in all respect as per IE rule, IS: 3043, including supplying and laying 25x5mm GI Strip 0.5 meter below ground with standard accessories.

415 V, A' class, non-skid, high voltage insulation synthetic mat mate from electrometric polymer material, 1000mm wide, 2.0 mm thick, Dielectric strength 3300V for 1 minute, fire retardant, no adverse effect of transformer oil , diesel, acis, alkali, High Tensile and Elongation properties, good mechanical strength to withstand load and movement of breaker trolley, as per IS 15652 with latest amendments.

Shock treatment chart, duly laminated in Hindi (Local)- 1NO. And English language- 1N0.

First Aid Box with all essential medicines including wall mounted bracket

415 V, Aluminium, anodised Danger caution plate in Hindi (local) and English languages with the sign of skull and bones in signal red colour on front side, as per IS 2551 with latest amendments.

CO2 type, portable Fire extinguishers, of size 5 Kg each, manufactured from CRCA sheets in all welded construction, body coated with glossy corrosion resistant epoxy powder coating, with inbuilt water proof pressure guage, with wall bracket, as per IS 2190 and IS 13849 with latest amendments.

Supply of jointing materials such as lugs, Tapes etc.

Supply of main Piping and Valves compriging of following

150 mm dia m.s. column Pipe assembly having thickness 7.1 mm both ends flanged complete 150 meter length ( 03 metr length x 50 nos.) painted with 2 coats of anti corrosion bituminous black paint over 1 primer coat

M.S.D.F. Bend 90 Degree -02 Nos.

150 mm dia CI D/F Sluice Valve P.N.1.0 -02 nos.

150 mm dia CI D/F Reflex Valve -01 no.

M.S.D/F Distance Piece 2.00 m length -01 no.

M.S. D/F Tee -01 no.

M.S. Distance Piece 3.00 m long -02 nos.

Ventury -01 no.

M.S. DI Clamp Heavy Duty -01 Set

M.S. T/W Cap 150mmx300 mm -01 no.

Nut-bolts,Rubber/Fiber Packing for Joining above Pipes & Specials -01 Set

Supply of 100 mm dial Pressure Gauge with control cock & fitting of range 0-10 Kg/Sqcm -01 no.

Supply of following Tools required for maintenance of Pumping plants.

DE Spanner Set -01 Set

Ring Spanner Set -01 Set

Screw Drivers -02 nos.

Pliers -01 no.

Hammer -01 no.

Pipe Wrench 14 inch -01 no.

Screw Wrench -01 no.

Tong Tester -01 no.

Chain Wrench 100 mm -02 nos.

Installation & Commisioning of Pumping Plants with accessories in side the Pump House but without Civil Works Such as laying of foundation,Cable Trench etc.

Testing of Pumping Plants at Site

Painting of entire installation with 02 coats of anti corrosion bituminous black paint over 1 primer coat Super Enamal Paint as per direction of Engineer Incharge

SITC of Chlorine Dozing pump

Supply of Electronically controled,Electrically Actuated,Diaphragm Oerated, Chemical Metering Pump,Wall Mounting suitable for Delivering Upto 10 Litre of Chemical solution/Sodium Hypo chloride solution Per hour Under maximum Delivery pressure up to 10 Kg/cm2 & Suction Lift Not Less Than 1.5 Meter With Chemical Dosing Tank And Accessories .

Excavation of earth in foundation in soil mixed Shingle, bajri etc. including lift upto 1.50 M. and lead upto 50 M. filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 M from the centre of the foundation treches, including labour, T&P etc. all complete.

First class brick work (one brick thick) in 1:6 cement and coarse sand including supply of all material, labour, T&P etc. complete (IN FOUNDATION AND PLINTH)

12 mm thick plinth plaster 1:2 PC Mortar.

First class brick work (one brick thick) in 1:6 cement and coarse sand including supply of all material, labour, T&P etc. complete in super structure including necessary cutting & moulding of bricks as required & also including honey comb brick work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

12 mm thick P.C Plaster1:6 cement and local sand mortar including supply of all labour material, T&P etc. all complete.

Same as above but rough cast finish plaster in 1:4 cement and coarse sand.

R.C.C 1:1.5:3 with cement, coarse sand and 20 mm gauge sotne ballast in lintatals sunshades doors and window sills excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.5 mm thick binding wire including supply of all materials, labour, T&P for proper completion of work.

Centering & Shuttering for slab, sill & sun shead

TMT steel or iron work in plain work such as R.C.C work wrought to required shape including supply of steel & its bending.

Mild steel or iron work in heavy sections & sizes as door frames window to required shape including supply of steel sections, hinges, nuts & their fixing required for proper completion of work.

40 mm thick PC 1:2:4 with cement coarse sand and 20 mm gauge stone ballast in flooring laid in panels finished with 12 mm floating coat of near cement & including 80 mm thick required for proper completion of work.

Same as above but 25 mm thick PCC 1:2:4 flooring over 75 mm 1:4:8 base concrete.

Providing and fixing panelled or paneeled glazed shuters for door window 35 mm thick shutters.

Providing and fixing panelled or paneeled glazed shuters for window 35 mm thick shutters.

Painting or warnishing new iron work or wood with one coat of primer & two coats of approved quality paint or varnish including supply of all materials, labour, T&P etc required for proper completion of work.

White washing 3 coats including supply of all materials, labour, T&P etc. required for proper completion of work.

Distempering with oil bound washable distamper of approved brand 2 coats with primer.

Supply and fixing of RS joist of 250 mm x 125 mm size and 4.1 m long in position.

Supply and fixing of Himachal stone tille in outer side of wall upto door level of pump house.

Supply and laying kota stone tile in floor.

Supply and fixing of Khapral in sloppy roof slab of Varandah.

Supply and fixing of white ciremic tile in inner side of wall upto door level of pump house.

Provide all Materials, Labour, T & P etc and Construct Boundary Wall 2.00 m Height & Iron Grill Over it, All Round the Tube Well & O.H.T Campus to prevent the approach of unauthorised souls.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complet

Electrification of pump house

Industrial Grade electrification of Pump House and Pump House Camps with Copper wiring in UPVC conduit (as per details enclosed).

Rising Main

Excavation in Pipe Line Trenches Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

"D.I. pipe conforiming to IS:8329/2000 Proving of all materials, carting from site store to site of work, lowering into trenches with true to alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) Ductile Iron Pipes by overlap fusion joint including supply of 'EPDM' rubber gaskets conforming to IS:5382-1985 with testing of pipe line complete."

150mm dia DI K-9 Pipe

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 (5% of DI Pipe weight)

Supplying of DI Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.

D.I Sluice/Gate valve Pressure PN 1.6 150mm Dia

D.I Non Return Valve Pressure PN 1.0 150mm Dia

D.I Air Valve along with Isolating valve 80mm Dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.

Supply,Installation,Testing and Commissioning of Full Bore Electromagnetic Flow Meter for Lines of followoing Sizes Comprising of Flow Tube Sensor with Transmitter cum Display unit and facility to provide data communication signal over Modbus 485 Port Pulse output and 4-20mA Signal output with Flanges, Clamps etc

150mm Dia

Construction of RCC OHT 500 KL OHT Staging 18.0M

Supply of all materials labour, T&P etc and construction of RCC O.H.T. of following capacities (in Kilolitres) and 12m staging with 1.00m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1M x 1M R.C.C., landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5mm angle iron posts fixed with ladder, from top to the floor inside of tank, M.S. M.H. cover with locking arrangement, lightining conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60m wide apron, painting on tank body vertical pipes, ladder, M.s. M.h. cover, ventillator column etc, complete with approved water proofing (apex)/ enamel paint, testing, filling water for testing purpose etc, including supply of vertical pipes and specials, assuming bearing capacity as 10MT/M² staging 12.00 metre

Including Additional rates for staging per meter height beyond 12 m height including cost of all metrials, labour, shuttering, scaffolding T&P complete.

500 KL OHT Staging 18.0M

Distribution Network & Related Components

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 50 m, stacking serviceable and unserviceable materials separately (Considering 30%)

Excavation in Pipe Line Trenches

Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)"

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Providing & Laying of pipe

HDPE pipe for water supply conforiming to IS:4984-1995

Proving of all materials, carting from site store to site of work, lowering into trenches with true to alignment, Laying & Jointing of full lengths of HDPE pipes, completion of work with testing of pipe line including supply of Jointing materials & specials.

PE-100, Normal Pressure(PN)-10 in 10 kg/cm2

63 mm dia pipe

75 mm dia pipe

90 mm dia pipe

110 mm dia pipe

D.I. pipe conforiming to IS:8329/2000Proving of all materials, carting from site store to site of work, lowering into trenches with true to alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) Ductile Iron Pipes by overlap fusion joint including supply of 'EPDM' rubber gaskets conforming to IS:5382-1985 with testing of pipe line complete.

D.I Pipe S&S K-7

150 mm dia pipe

200 mm dia pipe

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 (5% of DI Pipe weight)

SITC of D.I. Sluice/ Gate Valve , Pressure PN 1.0

Supplying of DI Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

D.I Sluice Valve (Scouring purpose)(PN-1.0)

80 mm dia

D.I. Air Valve along with Isolating valve

80 mm Diameter

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.

Supply,Installation,Testing and Commissioning of Full Bore Electromagnetic Flow Meter for Lines of followoing Sizes Comprising of Flow Tube Sensor with Transmitter cum Display unit and facility to provide data communication signal over Modbus 485 Port Pulse output and 4-20mA Signal output with Flanges, Clamps etc

At Outlet of OHT 200 mm Dia

House Connection

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.(Considering 15% of 2020 Households)

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works

M/S VEESONS BUILDERS PVT. LTD.