Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.1 Laccepted-aoc | ₹16.1 L | accepted-aoc |
Tender Value
₹16.7 L
EMD Value
₹16,800
Closing Date
27 Jul 2026, 4:05 pmClosed
VIJAYAWADA MUNICIPAL CORPORATION
Jawaharlal Nehru Buildings
Providing protective fencing and walking track under singh nagar fly over from telugu bapist church to venkateswara swamy temple ward 59 in circle-II area.Rc.E3.PD3(Parks)-113558/2026
965582
E Procurement Notice No. 16 /VMC/CDB/2026-27, Dt. 17-07 -2026 Rc.E3.PD3(Parks)-113558/2026
OPEN - NCB
Similar Work
NTR, ANDHRA PRADESH
5 documents required · 5 mandatory
₹593
₹16,800
20 Sept 2026
20 Jul 2026
20 Jul 2026
Engaging tractor for removing of waste materials ,tree trunks,lifting material including cost and conveyance of material as directed by the departmental authorities
Engaging Procliner(110) D50 forremoving of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities
Enguaging labour on NMR basis for removing of debris as directed by the departmental authorities.
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, s per SS - 20 B (APSS 308)
Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete
Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge
Supply and placing f the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.
Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS for new iron work(BLD-CSTN-10-7)
Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Supply and fixing of C.C Kerb not less than M-20 strength of size 600 X 400 X 110 mm thick with bottom thickness of 110mm upto height of 350 mm and top width of 50 mm thick chamfering with 450 at starts at 350 mm height to 400 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work.
Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Two coats -Plastered Surface(External Walls))
Collection and Supply of Red Earth including excavation, Cost and conveyance, Spreading, Sectioning etc., complete.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
113558-BOQ1.xlsx
TENDER_DOCUMENT • 0.05 MB
NIT-113558.doc
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .