Loading…
Loading…
Tender Value
₹13.7 L
EMD Value
₹13,800
Closing Date
11 Feb 2026, 4:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
J Srinivas
Circle-I Engineering section
Construction of Sanitary Inspector division office building in 46th division in Circle-I area (8th call)
893128
Rc.E6-116061/2022
OPEN
Civil Engineering Works
NTR, ANDHRA PRADESH
4 documents required · 4 mandatory
₹487
₹13,800
28 Jan 2026
28 Jan 2026
28 Jan 2026
Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.For 300mm dia
Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.For 300mm dia
R.C.C M25 Design Mix Supply and placing of the design mix concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
A) For 300mm dia piles
B) For pile caps
D) Columns GF For 230mm x 300mm size
E) Roof Beams GF
F) Roof Slab GF 125mm thick
G) Toilets Slab GF 100mm thick
H) Lintel beam GF
i) Sunshades GF
Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH
Conveyance of excavated earth with a lead of 2 KM including loading, unloading, spreading, sectioning etc., complete as directed by the departmental authorities
Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.
Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH
Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete For Ground Floor
Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grills using with M.S. Angulars, M.S. flats and 20mm square rods for grills including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.
Ceiling Plastering with CM(1:3) 20mm thick including cost of all materials like cement, sand, water and labour charges etc. complete, including seigniorage charges etc., complete for finished item work.
Plastering with Cm (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss. Inside
Plastering with Cm (1:4) 20mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss. Outside
Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.(For Internal walls)
Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.(For External walls)
Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS
Providing and fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanised as per IS277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No (BMT-N.38)
Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer- in-Charge, manufacture specification and drawing (BMT-N.06)
Windows: Centre fixed both side openable shutter 5'-0" x 4'-0" (1524x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm (BMT-P.07)
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MMtop and bottom rigid layer with an overalldensity of 750kg/Cum. It will be fixed tothe frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required forfixingthe doorwiththeframe(BMT-N.92)
Supply and delivery of RCC Joli with 40mm thick including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. BMS-W.16
Flooring with 25mm thick Bethamcherla stones set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(600x600 of 8mm to10 mm thick )
Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.
Manufacture, Supply and Delivery of Unplasticised 110mm dia PVCs Pipes of 6kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. MAT-07652
Manufacture, Supply and Delivery of Unplasticised 160mm dia PVCs Pipes of 6kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. MAT-07655
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM1:6 prop.Masonry. Inspection chamber upto914.4 mm(3'0") and fitted with light weight 457.2 mm x 457.2 mm(1'6"x1'6")C.I frame and cover of 20Kg. (BMW-B.06)
Labour Charges for fixing of CPVC Pipe lines and drainage facilities at proper gradient including fixing with nails and all labour charges etc.., complete as directed by the departmental authorities.for Plumber / Pipe fitter(LAB-00036)
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).(BMW-i.221&222)
For 41.30mm OD pipe
For 28.60mm OD pipe
For 22.20mm OD pipe
Supply and fixing of 25mm dia 1.80mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for swutches for light fan and separate plug points including all labour charges etc.,complete as directed by the departmental authorities.
Providing Name board with embrossing letters including cost and conveyance of all materials and all labour charges etc;complete as directed by departmental authorities.
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support fortanks
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P piller cock. (BMW-D.22)
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap
Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components
Supplying and Fixingbest Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996.
Supply&fixing pillarcock Jaquar make Queen series with 7years warranty:Chromeplated(BMW-i.143)
Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated (BMW-I.141)
Supply & fixing 31.75mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality (BMW-G.05)
Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet (BMW-G.06)
Supply & Fixing of Jaquar make chrome plated Metro pole flush valveconcealed type with cover plate 40mm size with 7 years warranty(BMW-I.198)
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make:Finolex as directed by the departamental authorities.
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.
Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc.,complete. a) LUMINAIRE MAKE : Pasolite / Cosmo / Siger/ Koncept/ Kiran/Vibrant/Leo/ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGH
Supply and fixing of 6A 3 pin wall plug Modular socket with 6A Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Makes: Legrand Arteor /GM-(Four-Five)/ Goldmedal(GIFA) as directed by the departamental authorities.
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
Supply of 8 Way SPN DB with IP 43, Protection suitable fo8 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: ABB/Standard / Havells-euro II / C&S / L&T/GM /Gold Medal/Anchor/Salzer/Polycab
Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes : As per list of recommended brands.
Supply of 2 Module Modular type Electronic step type Fan Regulator Makes: Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)
Supply and transportation of 30w LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS10322(Part 5 / Sec-3), Driver surge protection 4KV, In house additionalSurge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) /Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/HPL(CityVision)/Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG
Fabrication, Supply and delivery of MS 'L' type brackets made with 40 mm Nominal Bore GI pipe Medium Grade 1.5 meters length brackets suitable to 36 W LED and 70W LED fitting etc. complete. including cost of bending, conveyans to godown and all labour charges etc. complete and as per directions of the departmental authorities. Make:Jindal/Tata or equivalent.
Fabrication,Supply and delivery of MS clamps made with 40mmX5mm MS flat suitable for PSCC poles, 9.1 poles with necessary bolts and nuts etc. complete for 36 W and 70 W LED light fittings including cost of bending, welding, drilling, conveyance to godown and all labour charges etc. complete as per directions of the departmental authorities Make:Jindal/Tata or equivalent.
Labour charges For fixing Brackets, and 30 w Led lights an departmental authorities.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ-116061-2022.xlsx
TENDER_DOCUMENT • 0.03 MB
NIT.doc
TENDER_DOCUMENT • 0.05 MB
Download all tender documents and submit your bid