Painting and Repairing work in KASEZ owned Residential and Industrial Building at KASEZ, Gandhidham.

Sr. No. DESCRIPTION AMOUNT (DSR 2021) AMOUNT (NDSR)

A carriage of material 3257.40 0.00

B Earth Work 7918.25 0.00

C Concrete Work 208232.90 0.00

D Reinforced Cement Concrete Work 348124.85 0.00

E Cladding Work 231880.10 0.00

F Wood and PVC Work 184421.80 0.00

G Steel Work 760480.00 0.00

H Flooring Work 891216.50 0.00

I Finishing Work 23165967.30 4835800.00

J Repairs to Building Work 756210.00 0.00

K Dismantling and Demolishing Work 247523.75 0.00

L Water Supply Work 282236.15 0.00

M Water Proofing Work 10666510.00 1678050.00

TOTAL FOR DSR/NS ITEMS 37753979.00 6513850.00

SUB TOTAL DSR/NDSR ITEMS 44267829.00

Digitally signed by SHUBHAM

BILL OF QUANTITY

Painting and Repairing work in KASEZ owned Residential and Industrial Building at KASEZ, Gandhidham.

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

A Sub head: carriage of material

By Mechanical Transport including loading , unloading and

1.1.1 Lime, Moroom, Building Rubbish 5 Km 15.00 Cum 217.16 0.00 3257.40 0.00

Total of Sub head: carriage of material 3257.40 0.00

B Sub head: Earth Work

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in

depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth lead

upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

3 2.25 exceeding 20cm in depth, consolidating EACH deposited 15.00 Cu.m 253.95 0.00 3809.25 0.00

layer by ramming and watering, lead up to 50 m and lift

Total of Sub head: carriage of material 7918.25 0.00

C Sub Head: Concrete Work

Providing and laying in position cement concrete of

4 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded

aggregate 40 mm nominal size)

Providing and fixing up to floor five level precast cement

concrete solid block, including hoisting and setting in

position with cement mortar 1:3 (1 cement : 3 coarse

sand), cost of required centering, shuttering complete :

1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded

aggregate 20 mm nominal size).

Total of Sub Head: Concrete Work 208232.90 0.00

D Sub Head: Reinforced Cement Concrete Work

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All

work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived

5.1.2 from natural sources : 3 graded stone aggregate 20 mm 6.00 Cu.m 8364.20 0.00 50185.20 0.00

nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc.

and removal of form for

Foundations, footings, bases of columns, etc. for mass

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access

Steel reinforcement for R.C.C. work including

8 5.22 straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or

Providing and fixing sheet covering over expansion joints

with iron screws as per design.

5.29.2 Aluminium fluted strips 3.15 mm thick.

Total of Sub Head: Reinforced Cement Concrete

E Sub Head: Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror

premoulded and prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias and similar

locations of required size, approved shade, colour and

10 8.2 texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete

8.2.2 Granite of any colour and shade

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to

edge to give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade

Total of Sub Head: Cladding Work 231880.10 0.00

F Sub Head: Wood and PVC Work

Providing and fixing aluminium sliding door bolts, ISI

marked anodised (anodic coating not less than grade AC

10 as per IS : 1868), transparent or dyed to required

colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per

IS : 1868 ) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked,

anodised (anodic coating not less than grade AC 10 as per

IS : 1868) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing and fixing Fiber Glass Reinforced plastic (FRP)

Door Frames of cross-section 90 mm x 45 mm having

single rebate of 32 mm x 15 mm to receive shutter of 30

mm thickness. The laminate shall be moulded with fire

16 9.121 resistant grade unsaturated polyester resin and chopped 80.00 Metre 702.60 0.00 56208.00 0.00

mat. Door frame laminate shall be 2mm thick and shall be

filled with suitable wooden block in all the three legs. The

frame shall be covered with fiber glass from all sides. M.S.

stay shall be provided at the bottom to steady the frame.

17 9.122 Providing and fixing to existing door frames.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush

shutter in different plain and wood finish made with fire

retardant grade unsaturated polyester resin, moulded to 3

mm thick FRP laminate all around, with suitable wooden

blocks inside at required places for fixing of fittings and

polyurethane foam (PUF)/Polystyrene foam to be used as

filler material throughout the hollow panel, casted

monolithically with testing parameters of F.R.P. laminate

conforming to table - 3 of IS: 14856, complete as per

of Engineer-in-charge.

Total of Sub Head: Wood and PVC Work 184421.80 0.00

G Sub Head: Steel Work

Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets,

and similar works

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the

railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on

the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

Total of Sub Head: Steel Work 760480.00 0.00

H Sub Head: Flooring Work

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate) finished with a floating coat

of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate 300.00 sqm 545.00 0.00 163500.00 0.00

Kota stone slab flooring over 20 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

21 11.26 pigment to match the shade of the slab, including rubbing

and polishing complete with base of cement mortar 1 : 4

(1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting,

pillars laid on 12 mm (average) thick cement mortar 1:3

(1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the

slabs, including rubbing and polishing complete.

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622,

of approved make, in all colours and shades, laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and

matching pigments etc., complete.

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by the manufacturer), with

water absorption less than 0.08% and conforming to IS:

15622, of approved brand & manufacturer, in all colours

24 11.47 and shade, in skirting, riser of steps, laid with cement

based high polymer modified quick set tile adhesive

(water based) conforming to IS: 15477, in average 6 mm

thickness, including grouting of joints (Payment for

grouting of joints to be made separately).

Providing and laying matt finished vitrified tile of size

100x100x16mm having water absorption less than 0.5%

and conforming to IS: 15622 of approved make in all

colours and shades in out door floors such as footpath,

25 16.88 court yard multi models etc., laid on 20mm thick base of 90.00 sqm 1866.20 0.00 167958.00 0.00

cement mortar 1:4 (1cement : 4 coarse sand) in all

shapes & patterns including grouting the joints with white

cement mixed with matching pigments etc. complete as

direction of Engineer-in-Charge.

Providing and laying tactile tile (for vision impaired

persons as per standards) of size 300x300x9.8mm having

with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades in

for outdoor/indoor floors such as footpath, court yard,

multi modals location etc., laid on 20mm thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) in all

shapes & patterns including grouting the joints with white

cement mixed with matching pigments etc. complete as

per direction of Engineer-in-Charge.

Total of Sub Head: Flooring Work 891216.50 0.00

I Sub Head: Finishing Work

27 13.1 12 mm cement plaster of mix:

13.43 Applying one coat of water thinnable cement primer of

approved brand and manufacture on wall surface :

13.43.1 Water thinnable cement primer 5000.00 Sq.m 64.45 0.00 322250.00 0.00

Finishing walls with 100% Premium acrylic emulsion paint

having VOC less than 50 gm/litre and UV resistance as

29 13.48A per IS 15489:2004, Alkali & fungal resistance, dirt

resistance exterior paint of required shade (Company

Depot Tinted) with silicon additives.

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

New work (Two or more coats applied @ 1.43 litre/ 10

13.48A.1 sqm. Over and including priming coat of exterior primer 67800.00 Sq.m 154.45 0.00 10471710.00 0.00

applied @ 0.90 litre/10 sqm.

30 13.50 Applying priming coat:

With ready mixed red oxide zinc chromate primer of

13.50.3 approved brand and manufacture on steel galvanised 2003.60 sq.m 55.50 0.00 111200.00 0.00

iron/ steel works

Finishing with Epoxy paint (two or more coats) at all

locations preparedand applied as per manufacturer’s

specifications including appropriate priming coat,

preparation of surface, etc. complete.

b 13.52.2 On concrete/plaster work 2000.00 sqm 198.40 0.00 396800.00 0.00

Re-Lettering with black japan paint of approved brand and Per letter per

manufacture cm height

Providing and applying white cement based putty of

13.80 average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete.

34 13.87 White washing with lime to give an even shade :

Distempering with 1st quality acrylic distember (Ready

35 13.90 mix) having VOC content less than 50 grams/ litre of

approved brand and manufacture to give an even shade :

Removing dry or oil bound distemper, water proofing

cement paint and the like by scrapping, sand papering

and preparing the surface smooth including necessary

repairs to scratches etc. complete.

Painting (one or more coats) on rain water, soil waste and

37 13.94 vent pipes and fittings with black anticorrosive bitumastic

paint of approved brand and manufacture on old work :

Painting (one or more coats) on rain water, soil waste and

vent pipes and fittings with synthetic enamel paint of

approved brand and manufacture and required colour on

Painting with synthetic enamel paint of approved brand

39 13.99 and manufacture of required colour to give an even shade

13.99.1 One or more coats on old work 2000.00 Sq.m 86.55 0.00 173100.00 0.00

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

40 13.103 French spirit polishing :

13.103.1 One or more coats on old work 1000.00 sqm 185.40 0.00 185400.00 0.00

Polishing on wood work with ready made wax polish of

41 13.104 approved

brand and manufacture :

Finishing walls with water proofing cement paint of

required shade :

Old work (one or more coats applied @ 2.20 kg/10 sqm)

13.109.1 over priming coat of primer applied @ 0.80 litrs/10 sqm 2000.00 sqm 94.15 0.00 188300.00 0.00

complete including cost of Priming coat.

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)

on existing cement paint surface

Varnishing with flatting varnish of approved brand and

44 13.115 manufacture one or more coats on old work. 1000.00 Sq.m 82.95 0.00 82950.00 0.00

Painting on Footpath with floor paint of approved brand

and manufacture of required colour to give an even

45 Non-Sch shade, Cleaning the old paver/kerb surface area, 20000.00 Sq.m 0.00 241.79 0.00 4835800.00

removing dust from grrove and applying two or more

coats of floor paint.

Total of Sub Head: Finishing Work 23165967.30 4835800.00

J Sub Head: Repairs to Building Work

Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and

46 14.1 preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping

ground, all complete as per direction of Engineer-in-

a 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 1000.00 sqm 462.30 0.00 462300.00 0.00

Renewing glass panes, with putty and nails wherever

necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight

not less than 10kg/sqm)

48 14.7 Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 4 mm (weight not

less than 10kg/sqm)

Total of Sub Head: Repairs to Building Work 756210.00 0.00

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

K Sub Head: Dismantling and Demolishing Work

Demolishing cement concrete manually/ by mechanical

49 15.2 means including disposal of material within 50 metres

lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent

Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by

mechanical means in R.C.C. or R.B. work (Payment shall

be made on the cross sectional area of R.C.C. or R.B.

work) as per direction of Engineerin- charge.

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters

(steel or wood) including stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below 20.00 Each 118.30 0.00 2366.00 0.00

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm 75.00 sqm 60.50 0.00 4537.50 0.00

Dismantling stone slab flooring laid in cement mortar

stacking of serviceable material and disposal of

unserviceable material within 50 metres lead.

Demolishing brick tile covering in terracing including

serviceable material and disposal of unserviceable

material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and

57 15.56 cleaning the surface for plaster including disposal of 75.00 sqm 45.05 0.00 3378.75 0.00

rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as

approved by Engineer-in-charge, beyond 50 m initial lead,

for all leads including all lifts involved.

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Total of Sub Head: Dismantling and Demolishing

L Sub Head : Water Supply Work

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

having thermal stability for hot & cold water supply

60 18.9 including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

a 18.9.3 25 mm nominal outer dia Pipes 150.00 Metre 370.65 0.00 55597.50 0.00

b 18.9.4 32 mm nominal outer dia Pipes 150.00 Metre 435.05 0.00 65257.50 0.00

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with

61 18.48 cover and suitable locking arrangement and making 10000.00 per litre 9.70 0.00 97000.00 0.00

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved

quality conforming to IS:8931 :

Providing and fixing C.P. brass long body bib cock of

63 18.51 approved quality conforming to IS standards and weighing

not less than 690 gms.

Providing and fixing C.P. brass stop cock (concealed) of

64 18.52 standard design and of approved make conforming to

Total of Sub Head :Water Supply Work 282236.15 0.00

M Sub Head :Water Proofing Work

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/ 10 sqm. One

coat of self-priming of elastomeric waterproofing liquid

(dilution with water in the ratio of 3:1) and two coats of

undiluted elastomeric waterproofing liquid (dry film

thickness of complete application/system not less than

500 microns). The operation shall be carried out after

scrapping and properly cleaning the surface to remove

loose particles with wire brushes, complete in all respect

as per the direction of Engineer-in-Charge.

Providing & Applying polymer modified, flexible

cementatious negative side waterproofing coating with

elastic waterproofing polymers on interior wall plaster

surface in three coats @14.35 kg /10 sqm. one coat of self

priming of cementatious waterproofing polymer(dilution

66 22.23A with water in the ratio of 1:1) and two coats of 800.00 Sq.m 522.20 0.00 417760.00 0.00

cementatious waterproofing polymer (dilution with water

in the ratio of 3:1 ) after scrapping and properly cleaning

the surface to remove pre-existing paint film & loose

particles till plaster is visible, complete in all respect as

per the direction of Engineer-in-Charge.

Chemical water proofing treatment on roof. Cleaning the

slab properly, identifying the cracks and repairing with

SBR/Crack seal, applying one coat of Acrylic primer of

67 Non-Sch Chembond and applying three coat of acrylic base 1800.00 Sq.m 0.00 932.25 0.00 1678050.00

chemical chem87 of Chembond along with fiber net of 45

GSM, including labours, complete in all respect as per the

direction of Engineer in charge.

Providing, mixing and applying SBR polymer (of approved

make) modified Cement mortar in proportion of 1:4 (1

68 26.32 cement: 4 graded coarse sand with polymer minimum 2%

by wt. of cement used) as per specifications and

directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement

of thickness shall be done just after the surface

preparation is completed and Payment under this item

shall be made only after proper wet curing has been done

and surface has been satisfactorily evaluated by sounding

/ tapping with a blunt metal instrument and/or the 75mm

size cube crushing strength at the end of 28 days to be

not less than 30 N/Sqmm2).

Digitally signed by SHUBHAM

Sr. No. (DSR ITEM OF WORKS QUANTITY UNIT DSR RATE NDSR RATE AMOUNT

26.32.2 25 mm average thickness in 2 layers. 1500.00 Sq.m 510.50 0.00 765750.00 0.00

Total of Sub Head: Water Proofing Work 10666510.00 1678050.00

Digitally signed by SHUBHAM