WBNKDA/30/EE-E/NKDA OF 2024-25

Amount

Supply only LED street light made up of pressure die cast aluminium housing with high efficiency as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK07 of capacity 150 Watt. (Make : Havells/ Crompton/ Philips).

Supply only LED street light made up of pressure die cast aluminium housing with high efficiency as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK07 of capacity 120 Watt. (Make : Havells/ Crompton/ Philips).

Supply only LED flood light pressure die cast aluminium housing with PC diffused lens enclosure of capacity 100 Watt. (Make : Havells/Crompton/ Philips.

Supply only LED flood light pressure die cast aluminium housing with PC diffused lens enclosure of capacity 150 Watt. (Make : Havells/Crompton/ Philips.

Supply only LED Post Top lanten of capacity 40 Watt of sturdy design IP-66 and 1k 10 rating . (Make : Havells/Crompton/ Philips.

Supply and fixing LED bulb 20 Watt capacity. (Make : Philips/Havells/Crompton)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure

Supply only XLPE insulated armoured aluminium cable of size 10 Sqmm 4 core. (Make : Havells/Gloster/KEI).

Supply only XLPE insulated armoured aluminium cable of size 16 Sqmm 4 core.(Make : Havells/Gloster/KEI).

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Micro tunneling with 65mm OD HDPBC 5mm thick pipe through 1 mtr below the road of providing 100mm dia GI pipe (Vlass B medium of approved quality with ISI marked) and laying cables through the pipes by open cutting method at a depth of 1000 mm and 300mm wide and refilling the gap with white sand duly compacted to the satisfaction of the EIC.Material and labour for micro tunneling including supply of 50 mm dia HDPE pipe as per appropriate specification in single lenths for each individual tunnel.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 10 Sqmm 4 core.

F nishing the end of XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials of size 4 core 16 sqmm.

Supply and fixing of 240/230 Volt, 50 Hz, TP, power contactor (Make : L&T/ABB/ Schnider/Simence/GE) having contact block of the following rage :- (a) 70-100 Amp

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 63 Amp

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 100 Amp

Supplying and fixing 415 V Four Pole MCCB 125 Amp of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

Supply and delivery of electronic timer suitable for 240 Volt, 50 Hz (Make : L&T/ABB/Schneider/ Simence) of the following time (second)range : (a) 3 to 30 Second

Erection of single steel tubular pole up to 9m including MS sole plate (23 m dia * 6 m thick ) cap etc over flyover bridge etc with CC foundation (4:3:1) with graded stone chip (3/4" down) surrounding the pole base 2’ * 2’ up to a height of 1.35 m (4.1/2") from the pole base with 2 coats of black paint and then fixing the pole by means of 3 nos 4" * 1.1/2" * ¼” clamps to the fencing of the bridge at a suitable distance and providing the passage of wire / cable leading through hard polythene pipe (1.1/2") and also ebonite sheet 4-way ebonite terminal connector block including connection with lug by crimping arrangement and also neat cementing of pole base and finishing.

Construction of foundation of existing pole below G.L. having of dimension of 0.6 x 0.6 x 0.6 mtr (2’x 2’x2’) with graded stone chips (19mm down) in cement concrete proportion of 6:3:1 after necessary excavation including scraping .

Earthing with one 15.88mm dia GI rod with double GI nuts and washers and 4 SWG GI wire to an average depth of 3 mtr including S/F 15 mm dia GI pipe protection (1 mtr long). (a) With 1.8 mtr long earth spike.

Supply and fixing of copper wire single core 10 Sqmm. (Make : PWD Approved)

Supply and fixing 3 core 1.5 sqmm copper wire PVC insulated flexible type. Make : Havells/Gloster/KEI).

Supplying & Fixing GI waterproof type looping cable box size 200 x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint (Make : PWD Approved).

A P POWER AND CONCRETE (BID ID -6030621)

Beauty Enterprise (BID ID -6000649)