Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹17.9 L+₹1.3 L (7.84%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹18.0 L+₹1.4 L (8.60%)Rejected-Finance 0 NEAR SATYANARAYAN SOCIETY GAYATRI MANDIR ROAD 0 BHUJ KUTCH GUJARAT 370001 | KACHCHH | GUJARAT | 370001 | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 4 | L4₹19.1 L+₹2.5 L (15.1%)Rejected-Finance BHUJ NAKHTRANA HIGHWAY ROAD AT POST SHUKPAR NAVAVAS BHUJ KUTCHH 370040 GUJ | KACHCHH | GUJARAT | 370040 | L4 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 5 | L5₹21.7 L+₹5.1 L (30.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹36,960
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
ADDN/ALTN TO DOORS AND WINDOWS OF CERTAIN SMQs AT AF STN BHUJ
2022_MES_538380_1
8612/V/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
8 documents required · 8 mandatory
₹500
Yes
GE (AF) BHUJ
₹36,960
Yes
10 Nov 2022
23 Jul 2022
31 Aug 2022
23 Jul 2022
29 Aug 2022
16 Aug 2022
23 Jul 2022 - 6 Aug 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Material & labour for Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls or PCC block walling etc including raking out joints hacking for key secrubing down with water etc any description etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering 10 mm thick on concrete surfaces in CM 1:6with finished even & smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for Preparation new plastered wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge. .
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.
Supply & fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) ras in roof kerbs or mud stops, filling in frames and the like rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for cement concrete type C1 (1:3:6) (using 20 mm graded stone aggregate) as in bed blocks for fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass/gauge,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed by Engineer-in-Charge.
Supply & fix 35 mm thick 2nd class hard wood factory made plain framed, paneled shutter (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
Material and labour for Preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and appying two coats of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed by Engineer-in-Charge.
Supply & fix PVC door PDS-01 comprising of shutter and frame of Make : Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (panel) including necessary hardware fittings etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
Supply & fix 100 mm size extruded, aluminium handle fabricated type anodised type B-21 complete all as specified and directed by Engineer-in-Charge.
Supply & fix 300 mm size length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix 150 mm size extruded, aluminium alloy handle fabricated type anodised complete all as specified and directed by Engineer-in-Charge.
Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150 mm of size complete all as specified and directed by Engineer-in-Charge.
Supply & fix for floor door stopper of aluminium anodised and tongue with hard drawn steel spring, overall length of cover plate 150 mm and fixed in floor complete all as specified and directed by Engineer-in-Charge.
Supply & fix mild steel 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- (i) Aluminium grill fixed under above item shall be measured and paid separately. (ii) Main section of aluminium shall be used 100mmx45mm with same thickness as mentioned in lieu of Drg 65mmx38mm above reffered due to less space available for fixing wire gauge shutter fixing grill
Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engineer-in-Charge
Supply , fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer's instruction. Note- Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and directed by Engineer-in-Charge.
Supply & fix rubber bearing for fixing of glass of item No 26 above complete all as specified and as directed by Engineer-in-Charge.
ASHAPURA CONTRACTOR
SHREE BHANU ENTERPRISE
Mepani Construction Company
Khodiyar Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .