Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹44.9 LAccepted-AOC | L-1 | Accepted-AOC L-1 bidder kindly submit the SD as mentioned | |
| 2 | L-2₹47.9 L+₹3.0 L (6.64%)Rejected-Finance | L-2 | Rejected-Finance higher bid | |
| 3 | L-3₹48.0 L+₹3.1 L (6.84%)Rejected-Finance | L-3 | Rejected-Finance higher bid | |
| 4 | L-4₹48.9 L+₹4.0 L (8.82%)Rejected-Finance | L-4 | Rejected-Finance higher bid | |
| 5 | Rejected-Technical 218 2ND FLOOR U S COMPLEX 120 MATHURA ROAD NEW DELHI 110076 | SOUTH | DELHI | 110076 | - | Rejected-Technical EMD Not submitted As per MES manual of works 2020 and SOP of CPWD , MSME contractors are not exempted from submission of EMD for Works category |
Tender Value
₹63.5 L
EMD Value
₹1.2 L
Closing Date
27 Oct 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GENERAL MANAGER, OFDR
ORDNANCE FACTORY DHEUROAD PUNE ON OLD MUMBAI PUNE HIGHWAY 412101
Periodical services to Residential bldgs Type I and Type II qtrs and repairs to damaged chajja and cupboards in colony area at OFDR
2022_MIL_131299_1
GM/OFDR/B/R/672 of 2022-23
Open Tender
Civil Works
Works
365 days
ORDNANCE FACTORY DEHUROAD, PUNE
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹1.2 L
Yes
15 Nov 2022
8 Oct 2022
28 Oct 2022
11 Oct 2022
27 Oct 2022
11 Oct 2022
Amount
M & L for preparation of old plastered surface by brooming down, or steel wire brushing, scraping smoke soot and and apply two coats of white washing on the walls as per directives.
M & L for preparation of old plastered surface by brooming down, or steel wire brushing, scraping smoke soot etc. and apply two coats of white wash on ceilings etc. all as per directives and instruction of Engg-in-charge.
M & L for preparation of old plastered surface by brooming down, or steel wire brushing, scraping smoke soot etc. and apply two coats of cement paint etc. all as per directives and instruction of Engg-in-charge. Make- Snowcem,Bergerr Topcem including curring etc.
M & L for prepartion of old painted surface of any description not otherwise stated/described over 10 cm width or girth and apply two coats of synthetic enamal oil paint 1st quality ( Make Asian, Nerolac,berger paint) on wooden &steel surfaces of approved colour as per specification and as directed by Engg-in-charge.
M & L for preparation of surfaces by brooming down, scraping down, washing/rubbing down, stopping distemper surface and apply two coats of oil bond distemper ( of approved colour/shade ) on internal walls as per specification ( Make Asian, Nerolac,berger paint)
M&L taking down old cement plaster of any discription from brick/cement block masonry wall including racking out joints, hacking for key, scrubbing down etc. & fresh plastering 15mm thickness in cement mortor 1:4 on fair faces of brick/cement block masonry wall ,scaffolding etc complete as per specification & as directed by Engg-in-charge
M & L for providing neeru finish to the newly plastered wall surface as specified, curing etc. complete as per the directives of Engg-in-charge.
Taking down cement plaster, any description on brick or stone walls or concrete etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as Specificed in SSR part-I & as directed by Engg-in-Charge.
M&L for C.C M-20 (20 mm graded aggregate) in chajjas including compacting, curing etc. complete, all as specfied in SSR Part-I & as directed by Engg-In-Charge
M&L for wire netting of galvanised steel wire 0.71 mm dia fixed with tinned tacks of wire staples on BBM or RCC surface, size of mesh 25X25 mm all as specfied in SSR Part-I & as directed by Engg-In-Charge.
A) M&L rendering 10mm thick 1st coat in cement mortar 1:3 on fair faces of brickwork or concrete surfaces, curing etc complete, all as specified in SSR Part I & as directed by Engg-In-Charge.
B) M&L for II coat of rendering 10 mm in thick in cement mortar 1:3 over 1st coat, curing etc complete, all as specified in SSR Part I & as directed by Engg-In-Charge.
C) M& L for finished even and smooth rendering coat in C.M. 1:3,(w.o using extra cement), curing etc complete,all as specfied in SSR Part-I & as directed by Engg-in-charge.
Finishing cement concrete surface even & smooth using extra cement curing etc.complete all as specfied in SSR part-I &as directed by Engg-In-Charge.
A)M&L for deformed or twisted mild steel 10mm dia. & over bars, cut to length, bent to shape required, including cranking, bending spirally for hopping for coloums, hooking ends & binding with & including M.S wire (annealed) not less than 0.9mm dia or securing with clips, all as specfied in SSR part-I &as directed by Engg-In-Charger.
B)---Ditto---as par item no.B8 above, but 6mm & 8mmDia
M & L for flat formwork to chajja fair finished surfaces, approved quaility formwork including oiling etc. complete all as specified in SSR Part-I & as directed by Engg-In-Charger.
Liquid water proofing compound for plaster & concrete. Use as per maker's specification & instructions etc. complete, all as specified in SSR part -I and as directed by Engg.-In-Charge. Make:-Pidilite(Dr.fixit).
M&L Cement concrete in foundation and mass concreting Type-B2 1:2:4(40mm graged agg.) inculding formwork etc.complete all as specified in SSR Part-I & as directed by Engg-In-Charge.
OMKAR DEEPAK DHAVAN
V C SHETH
M/S Hrushikesh A. Patil
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .