REPAIR/REPLACEMENT OF STREET LIGHT FITTINGS ALONG WITH CONNECTED ITEMS AT MIL STN BHUJ,KHAVDA AND GANDHIDHAM AREA UNDER GE (ARMY) BHUJ

Amount

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 9000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt,under voltage and over voltage protection ,1 LED shoud be 1 to 3 watt, impact, IK7 or higher and capacity 90 Watt,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 7000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt,under voltage and over voltage protection ,1 LED shoud be 1 to 3 watt , impact, IK7 or higher and capacity 70 Watti,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 6000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt,under voltage and over voltage protection ,1 LED shoud be 1 to 3 watt, impact, IK7 or higher and capacity 60 Watt ,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of post top lantern LED type of capacity 20 Watt 230 Volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact as per manufacture recommendation and corrosion resistant complete with driver and lamp all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of LED Bolard new generation ,energy saving, environmental friendly , long life aesthetically designed aluminum landscape for diffused lighting with high power LEDs ,height of light 610mm or next higher size ,IP65 protection ,impact as per manufacture recommendation ,and capacity 08 Watt complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of LED Bolard new generation ,energy saving, environmental friendly , long life aesthetically designed aluminum landscape for diffused lighting with high power LEDs ,height of light 610mm or next higher size ,IP65 protection ,impact as per manufacture recommendation ,and capacity 10 Watt complete all as specified and directed by Engineer-in-charge.

M&L for three core PVC insulated sheathed(heavy duty) unarmoured copper conductor multi stranded cable (for phase, neutral and earth ) of size 1.50 Sqmm for connection drawing through pole or GI brackets from junction box to light conncector of street light fittings including heavy duty PVC conduit of size 20mm dia, lugs /thimbles according to size of cable complete all as directed.

Supply and fixing in replacement old unserveceable cable junction box with new pole mounted thermoplastic cable junction box of size 300x200x105mm or next higher size for street light with IP-65 protection, weather proof with metric knockouts for cable entry for outdoor installation with front door opening system, copper busbar suitable capacity with RYBN & sleeves as per colour coding, cable gland for incoming and outgoing cable according to cable size including terminals for one incoming and two outgoing cables of size 16/25 sqmm 4 core, one MCB SP 6 Amp 240V AC with mounting on DIN rail, clamp of flat iron, nut, bolt and washers complete all as specified and directed .

Labour only for checking the serviceability of different spares / components / parts of security light fitting/street light any wattage/capacity of any description and in position or by taking down the fitting, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fitting and making the light fitting serviceable, connecting to electric supply and its testing on installation complete all as directed by Engineer-in-Charge. NOTES : Contractor's quoted rates are deemed to be included the following : - (a) Removal of unserviceable / broken parts of fitting, fixing of new parts in replacement to make the fitting serviceable. New parts shall be measured and paid for separately as "supply only" against respective item of Sch ‘A’. (b) Necessary T&P i.e. ladder, tools etc required for checking, making the light fitting in serviceable conditions including necessary screws, insulating tapes, internal wiring, gasket etc fixing in position and testing, of any description on poles / on walls / on pillars etc i.e. in any position. (c) Contractor shall be paid only one time the labour charges quoted above in Schedule `A' items for a particular fitting repaired irrespective of the number of times labour and resources arranged by him to check the serviceability of the fittings and replacement of unserviceable / defective parts in order to maintain the fittings in serviceable/working condition.

Supply only LED driver for street light rating upto 45W complete all as specfied and directed

Supply only LED driver for street light rating from 45W upto 90W complete all as specfied and directed

Supply only LED MCPCB (LED chip) upto 45W complete all as specfied and directed

Supply only LED MCPCB (LED chip) from 45 to 90W complete all as specfied and directed

Supplying and fixing contactor for street light timer of rating 40 Amp 9AC-1) 4 pole,220 Volts,CN 325F complete all as specifed and directed.

Supplying and fixing digital Timer for street light timer of rating 40 Amp 9AC-1) 4 pole,220 Volts,CN 325F complete all as specifed and directed.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact IK as per manfacture recommendations and corrosion resistant complete with driver and lamp complete all as specified and directed

Supply and fix street light timer panel of capacity 3 phase, 5KW , IP 65, made of polycarbonate,UV ray protected, and contactor of capacity 40A all as specfied and directed

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flate 3 core cable of size 6 Sqmm.

(1) Common miscellaneous material such as screws any type, nails, washers, insulation tapes, clamps, hooks, which are required for the work the cost of which is deemed to be included in quoted rate.

(2) Contractor’s supervisor (electrical engineer) should be available at the site to supervise the works and co-ordinate with the officials.

(3) The skilled worker should be facilited with mobile phone to contact on urgent tasks & their numbers should be displayed at various places and forwarded to administration.

(4) The contractor shall ensure safety of his workers and other at site of work and shall be responsible for any consequence arising out of execution of the repair and maintenance works.

(5) The contractor shall ensure that his repair/ maintenance staff is qualified and licensed for their part of work. He shall be responsible for their conduct. The contractor shall be held responsible for any loss or damage to employees’ state insurance corporates property.

(6) Any persons of contractor causes damage of equipment or property of Military station, the contactor will be solely held responsible for the cost of consequences thereof.

(7) Contractor shall carry out all test. The equipments shall conform to Indian standards.

(8) Measurement shall be submitted by the contactor to the department weekly. The contractor should be available for joint measurement along with supervisior on every Wednesday from 15.00 hr to 17.00hr

Pelectricals

Ashok Electric and Electronics