ERECTION OF 11NOS. INDOOR SS AT VIJAYAWADA

SCHEDULES

DESIGN & PRELIMINARY

SUPPLY OF MATERIALS

LABOUR, CIVIL & ROAD,WORKS AND DISMANTLING WORKS

Description of Work / Item(s)

DESIGN WORKS

Soil testing charges

Design & preparation of layout of floor plan (G+2) of the substation, PTRs Yard and civil structural duly certified by the approved structural Engineers.

Site investigating charges for locating borewell point

Detailed survey and tree clearance for 33KV UG Line

Detailed survey and tree clearance for 33KV OH Line

Detailed survey and tree clearance for 11KV UG Line

Detailed survey and tree clearance for 11KV OH Line

Detailed survey for UG Cable at railway crossing

Description of Work / Item(s)

SUPPLY OF MATERIAL

Supply of 8MVA Power Transformers as per the technical specs

Supply of 105 lb rail poles of 3 Mtr. Length each over the transformer plinth including cost of rail poles, with stoppers. (2 Nos. per SS)

supply of Indoor 33KV switchgear for incoming cubicles & transformer incoming cubicles .33KV, 25KA 1250A Vaccum type indoor switchgear with drawout type circuit breakers of APSPDCL approved make for incommers, transformer control cubicles, feeder cubicles complete with aluminium bus bar connectors/control cables, glands, CTs(class 5p10 & 0.2s)& CR Panels with IED relays, bus bars and electrical equipment fitted with electrical wiring, annunciation board with digital 3 1/2 digit ammeter & voltmeter and electronic TVR meter reputed make with mod bus facility (RS 232 port) and MRI compability with class of accuracy 0.2S and numeric relays of Asidha/ABB/Areva/ Siemens/Schneider as per technical specification. (Spare Fuses 3 Nos must be supply).

For feeder cubicles with CTs of ratio 400-200/1-1A

For Transformer cubicles with CTs of ratio 400-200/1-1-1A and differential relay

For Bus Coupler with Bus Riser and CTs of ratio 400-200/1-1A

Supply of 33 KV PTs of ratio 33KV/SQRT(3)/110*SQRT(3) of 0.2 class, Burden 25 VA (1 Spare PT for each SS must be provided)

Supply of Indoor 11KV switchgear for outgoing cubicles and tranformer outgoing cubicles 11KV, 25KA 1250A Vacuum type indoor switchgear with drawout type circuit breakers of APSPDCL approved make for transformer control cubicles, feeder cubicles and cubicles complete with aluminium busbar connectors/control cables, glands, CTs & CR Panels with IED relays (class 0.2s) and electrical equipment fitted with electrical wiring annunciation board with digital 3 1/2 digit ammeter & voltmeter and electronic TVR meter make L&T or Secure with mod bus facility (RS 232 port) and MRI compability with class of accuracy 0.5 and numeric relays reputed make as per technical specification. (Spare Fuses 3 Nos must be supply).

For feeder cubicles with CTs of ratio 200-100/1-1A

For Transformer cubicles with CTs of ratio 600-300/1-1-1A and Aux relay

For Bus Coupler with Bus Riser and CTs of ratio 600-300/1-1A

Supply to the Station Transformer is to be Provided through indoor switchgear with draw out type dummy Breaker( without Vacuum interrupter and Mechanism)

Supply of 11 KV 3 - Phase PTs of ratio 11 KV/110Volts, Class 0.2, Burden 50VA (1 Spare PT for each SS must be provided)

Cable side earth trucks

3-Ph, 25 KVA 11KV/415V transformer

supply of 1No. 9.1M/280 Kg WL PSCC pole for Single Pole structure for 25 KVA DTR

11KV, 200A AB switch

11KV HG fuse set

LT distribution box, LT knife type 100A fuse units with insulated handle

CI earth pipe with flange (80mm dia. 2.5M long and 10mm thick)

GI Earth Pipes with flange (40mm dia, 1.8 Mt Long)

3 1/2 LT XLPE 70Sqmm cable

4mm GI earth wire

supply of 220V, 100AH sealed, maintenance free battery set with charger complete

Supply of 33KV, 3cx400Sqmm, XLPE armoured cable

Supply of 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits suitable for indoor breakers.

Straight Through Jointing Kit

End termination Jointing Kit

Supply of 11KV, 3cx185 Sqmm, XLPE armoured cable

Supply of 11KV, 3cx185Sqmm, XLPE armoured cable with heat shrinkable cable end termination kits suitable for indoor type

Straight Through Jointing Kit

End termination Jointing Kit

Supply of various sizes of control cables

2 Core 2.5Sq.mm copper cable for all breakers from DC distribution box

4 Core 2.5 Sq.mm copper cable from battery to DC distribution box

10 Core 2.5 Sq.mm Copper cable

Supply of LT AC Panel Board with 2/1.6 mm thick MS Sheet with powder coating suitably fixing with 63 Amps TPN MCB (I/C) and 12Nos. 2pole 32 Amps MCBs, Digital Volt meter , Digital Ammeter & LED indication lamps including giving all connections as per directions of Engineer - in Charge

Supply of DC Panel Board with 2/1.6 mm thick MS Sheet with powder coating suitably fixing with 12 Nos.2 pole 32 Amps MCBs, Digital Volt meter , Digital Ammeter & LED indication lamps and providing common alarm system with lamp indication for each VCBs & PTRs and suitable alarm accepatance including giving all connections as per directions of Engineer - in Charge

CI Earth Electrode 150 mm dia., 2.75 Mt. Long for PTR earthing

Cast iron pipe nominal dia 80 mm and 2.5 meters long for earthing

MS Flat 75x8mm

MS Flat 50x6mm

Supply of Sand Bucket stand with buckets

Supply of CO2 Cylinder 4.5 Kgs

Supply of ISI make ABC Power MAP 2 Kg Fire extinguisher Mono ammonium phosthate power 50, stored pressure type, complete with pressure guage and all accessories

Supply of tools - Standard Tool Box with reputed make Tools consisting of tools

Supply of 1x 36/40 W LED Patty type tube light luminarie powder coated CRCA sheet steel housing with Copper Chokes and all standard accessories of reputed makes

Supply of 9 Mtrs tubular pole for yard light coated with paint

Supply of 56 watt. LED Luminary, efficiency > 100-128 Lumen / watt confirming to IS 10322 / IEC60529, PF > 0.95, Efficiency > 80% of standard make

Supply of 48" (1200mm) Sweep ISI mark BEE 5 Star rated Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter with Regulator of reputed makes atomincluding cost and conveyance of all other materials complete for finished item of work as directed by the Engineer-in-Charge.

Supply of steel office Table of size 4' x 2' x 30" with 18 mm plywood, Teakwood finishing with Drawers on right hand side and with automatic locking system

Supply of PVC chairs of standard make

Supply of Quartz wall clock 1' x 1' size of reputed make

Connecting of neutral of PTR to earth pit

50x6 mm 15 inches length copper flexible jumper with lugs

Bolts and Nuts

supply of GI Pipe 100mm for 11KV cable take off / tapping arranements

supply of GI Pipe 150mm for 33KV cable take off / tapping arranements

Rail pole earthing (11 Nos.)

90 lb rail poles

Borewell

Supply ISI mark submersible 2.0 HP, Single Phase 25 stages pumpset suitable for 106 / 156mm dia borewell

Supply of Casing with heavy duty PVC rigid pipe of 160mm dia double socket PVC/SWR pipe 6Kg/Sq.cm - ISI Brand including cost and conveyance of materials, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - charge

supply of sutable size panel board for single phase submersible motor above 2HP to 3HP consisting of relay, contactor, staring and running capacitors, Voltmetar ammeter,indicator lamp, MCB, on/off switch.

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR / EBXL PVC insulated ISI Copper cable of reputed makes in existing pipe for mains including all materils complete.

supply of 1000Lts Polyethylene water storage tank double layer approved brand

Supply of 32mm dia.HDPE pipe confirming to IS 4984-1995

32mm dia UPVC pipe

25mm dia UPVC pipe

20mm dia UPVC pipe

32 mm GM Gate valve

25 mm GM Gate valve

Supply of Indian make Flat back wash hand basin

Supplying in walls, ground different dia PVC Pipes of Prince or sudhakar or equivalent make for sewer lines including cost and conveyance of PVC Pipes, specials, PVC cowls labour charges etc complete.

75 mm dia.( 4kg/cm2)

110mm dia.(4 kg/cm2)

33KV Line

33KV UG cable (5.93 KM)

Supply of 3x400Sqmm, 33KV, XLPE armoured cable in the cable trenches as per standards.

Supply of Straight Through type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits

Supply of end termination outdoor type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits

33 KV Line type Lightening Arrestors

Supply of 300mm DWC/GI Pipe thickness 5mm (as per field requirement)

4 Nos. of M+6 Tower For 33 KV Line

Supply of Galvanized M+6 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.

80 mm dia CI pipe

4 Nos. of M+9 Tower For 33 KV Line

Supply of Galvanized M+9 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.

80 mm dia CI pipe

3 Nos. of M+12 Tower For 33 KV Line

Supply of Galvanized M+12 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.

80 mm dia CI pipe

33KV OH LINE ON12.5 SPUN POLES (9.20 KM)

12.5Mtrs.Spun poles

9.1Mtr. PSCC Poles for struts

100Sqmm AAA conductor

Strut clamps set with bolts and nuts

33 KV 'V' Cross Arms

M.S Channel 100x50 mm for side arams

M.S angle 65x65x8 mm

MS Back Clamps

HT Top Fitting

33 KV Pin Insulators with pins

MS Stay set complete

HT Guy Insulators

33KV Polimer Strain Insulator

GI Stay wire 7/3.15mm

Bolts and nuts of different sizes

No.6 GI wire for coil earthing

Line DP structure with A.B.Switch with 12.5 Mts Spun poles (11 Nos.)

12.5Mtr.Spun Pole

MS Channel 100 X 50 mm

MS Angle 65 X 65 X 6 mm

MS Flat 75x8mm

33 KV Polymers with metal parts

33 KV, 800 Amp. AB Switch

GI earth pipe 40mm dia 1.8M long

4mm dia GI wire

Alluminium 'T' clamps of suitable size

Alluminium tape

100 Sq.mm AAA Conductor

Bolts and nuts of different sizes

danger Boards

Vertical Formation With 12.5 Mtrs Spun Poles (11 Nos.)

12.5Mtr.Spun Pole

MS back Clamps

33 KV Polymer Insulators (B&S) with Metal parts

Alluminium 'T' clamps of suitable size

Alluminium tape

Bolts and nuts of different sizes

Single Pole cut point With 12.5Mtrs Spun Poles with 2 Nos channel cross arams (10 Nos.)

12.5 Mts spun pole

100X50mm MS Channel

MS Angle 65x65x6 mm

MS flat 75x8 mm for fish plates

MS back Clamps

33 KV Polymer Insulators (B&S) with Metal parts

33 KV Pin Insulators with pins

Alluminium 'T' clamps of suitable size

Alluminium tape

Bolts and nuts of different sizes

Single Pole angle cut point With 12.5Mtrs Spun Poles with 4 Nos channel cross arms (10 Nos.)

12.5M Spun pole

100X50mm MS Channel

MS Angle 65x65x6 mm

MS back Clamps

33 KV Polymer Insulators (B&S) with Metal parts

33 KV Pin Insulators with pins

Alluminium 'T' clamps of suitable size

Alluminium tape

Bolts and nuts of different sizes

Tapping cross arms (11 Nos.)

100X50mm MS Channel

MS Back Clamp

33 KV polymer stain Insulators (B&S) with Metal parts

33 KV Pin Insulators with pins

Bolts and nuts of different sizes

33KV Pin Insulators on existing supports

LT 3-Ph cross arms LT pin insulator complete with hardware wherever necessary on existing poles (11 Nos.)

75x40 mm M.S channel

MS back clamp

LT pin insulator with pin

CI knob

Side arm with strut angle OR V cross arm and H x arm with A type pedastal, pin insulator complete (11KV line) (10 Nos.)

MS Channel 75x40 mm

MS angle 50 x50 x6mm

MS Flat 50 x 6 mm

MS Back Clamp

11 KV Pin Insulators with pins

Bolts and nuts of different sizes

11KV Line

11KV UG cable (6.9 KM)

Supply of 3x185Sqmm, 11KV, XLPE armoured cable in the cable trenches as per standards.

Supply of Straight Through type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits

Supply of end termination Outdoor type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits

Supply of 300mm DWC/GI Pipe thickness 5mm

11KV LINE 11 Mts Spun POLES: Supply of 11Mtrs Spun poles including earth coils, cross arms, top cleats, pin insulator complete with hardware (32 KM)

11Mtrs Spun poles

11 KV 'V' Cross Arm

MS Back Clamp

HT Top Fitting

11 KV Pin Insulators with pins

11 KV Polymer Strain Insulators with metal parts

Bolts and nuts of different sizes

Line DP structure with AB Switch (11 Nos.)

11Mtrs Spun poles

100X50mm MS Channel

50x50x6 mm angle

11 KV polymer starin Insulators (C&T) with Metal parts

11 KV, 400 Amp. AB Switch

GI earth pipe 40mm dia 2.5M long

4mm dia GI wire

Alluminium 'T' clamps of suitable size

Alluminium tape

back clamps

Bolts and nuts of different sizes

MS stay set with HT Guy insulator & 7/3.15mm GI Stay wire complete

MS Stay set complete

stay wire 7/3.15 mm

HT Guy Insulator

Bolts and nuts of different sizes

9.1 Mtrs/200Kg WL PSCC poles as struts complete (32 KM)

9.1 Mtr., 200 Kg WL PSCC Pole

Strut clamps sets

Bolts and nuts of different sizes

Vertical Formation including 11 mts Spun poles and supply of 6Nos.11KV Polymer string insulator C&T type with metal parts, 3Nos. 11KV pin insulators with pins to horizantal cross arms (100x50mm), top cleat and back clamps. (11 Nos.)

11 mts Spun poles

MS Back Clamp

11 KV pin insulators with pins

11 KV polymer starin Insulators (C&T) with Metal parts

Alluminium 'T' clamps of suitable size

Alluminium tape

Bolts and nuts

Single Pole cut point

11 mts Spun poles

100X50mm MS Channel for 11 KV Horizontal Cross Arm

50x50x6 mm angle

MS flat 50 x 6 mm for fish plates

11 KV polymer starin Insulators (C&T) with Metal parts

11 KV Pin Insulators with pins

Alluminium 'T' clamps of suitable size

Alluminium tape

Bolts and nuts of different sizes

Angle cut point

11 mts Spun poles

100X50mm MS Channel for 11 KV Horizontal Cross Arm

50x50x6 mm angle

MS flat 50 x 6 mm for fish plates

11 KV polymer starin Insulators (C&T) with Metal parts

11 KV Pin Insulators with pins

Alluminium 'T' clamps of suitable size

Alluminium tape

Misc. items like coil earthing, jumpering, bolts & nuts etc.

Tapping cross arm (horizantal) supported by 50x50x6mm MS angle as strut, back clamps, 3Nos. 11KV strain insulators/ Polymer string insulator with metal parts complete (11 Nos.)

75X40mm MS Channel for 11 KV Horizontal Cross Arm

50x50x6 mm angle

MS Back Clamp

11 KV polymer starin Insulators (C&T) with Metal parts

11 KV Pin Insulators with pins

Bolts and nuts of different sizes

Side arm with strut angle OR V cross arm and Horizontal x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole (32 Sets)

100X50mm MS Channel for 11 KV Horizontal Cross Arm

MS angle 50 x50 x6mm length 2.2 mtrs

MS Flat 50 x 6 mm length 1.6 mtrs

MS Back Clamp

11 KV Pin Insulators with pins

Bolts and nuts of different sizes

LT 3 phase cross arm LT pin insulators complete with hardware wherever necessary on existing pole

3 phase 5 wire cross arms

3 phase 4 wire cross arms

LT pin insulator with pins

LT Back clamp

LT shackle insulators with metal parts

Bolts and nuts of different sizes

Supply of 3Sets of strain insulators (C&T type)

11 KV polymer starin Insulators (C&T) with Metal parts

11 KV Pin Insulators with pins

Alluminium 'T' clamps

Alluminium tape

Bolts and nuts

100Sq.mm All Aluminium Alloy Conductor

Errection of UG Cable at railway crossing (3 Crossings)

Supply of 300mm dia 5mm thick GI pipe under the railway track upto DP

Supply of 3X400 Sq.mm UG cable upto DP

Supply of 125mm dia 3mm thick MS pipes vertically from bottom to top of DP

Supply of out door pipe heat shrinkable jointing kits of 3X400 Sq.mm cable

Connecting the equipment to another equipment with 200 sq. mm ACSR conductor including measuring, Cutting, Clamping (complete). (G.I. Bolts should only be used for all connectors)

Supply and fixing of MS Steel with 150X150mm RS Joists, angles, Channels, Flats, square pipes etc. of different sizes including cost and conveyance of all the materials, fabrication charges,fixing charges, labour charges and painting with two coats of synthetic enamel paint over one coat of primer etc., complete for finished item of work as directed by the Engineer-in-charge.

Description of Work / Item(s)

LABOUR & CIVIL WORKS

Earth work excavation in foundations for building and for levelling and depositing the earth on banks with a initial lead of 10 mt and a lift of 2 mt in mixture of gravel, soft disintegrated rock like shales, ordinary gravel, stony earth and earth mixed with fair sized boulders including shoring, shuttering, sheet planking and dewatering with all leads and lifts, tools and plants, labour, disposal of excess excavted earth etc., complete for finished item of work as directed by the Engineer in charge.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with double under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters UPTO 380mm Dia

Filling with sand, below and sides of foundations and basement in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of all Misc Materials, labour charges, hire charges of T&P, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Plain Cement Concrete in (1:4:8) proportion for leveling course in foundations using 40mm size HBG metal from approved quarry including cost and conveyance charges of cement and all other materials to site, all leads and lifts, seigniorage charges, dewatering, labour charges, machine mixing, laying concrete, ramming in 15 cm thick layers, finishing top surface to the required level, curing etc., complete for finished item of work as directed by the Engineer in charge.

RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., including cost of steel and its fabrication complete as directed by the Engineer in charge.

300mm dia.double under reamed pile of length 4.5m

Pile caps

Plinth Beam

Columns-Ground Floor

Columns-First Floor

Lintels-Ground Floor

Lintels-First Floor

Beams-Ground Floor

Beams-First Floor

Slabs 200 mm thick-Ground Floor

Slabs upto 150 mm thick- Ground Floor

Slabs upto 150 mm thick-First Floor

Sun shades and chajjas (62mm average thickness and 60 cm width)-First Floor

Reinforcement steel supply and labour charges for cutting, bending of HYSD steel bars / mild steel bars of different diameters to required size and shape placing in position with cover blocks of approved size and tying with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, providing of fan hooks with 16mm dia MS rods including cost and conveyance charges of steel , including cost of binding wire, cover blocks, including cost of overlaps, welding, wastage, couplings, space bars, chairs etc., all incidental & operational charges, all labour charges etc., complete for finished item of work as directed by the Engineer in charge .

Ground Floor

First Floor

Brick masonry for walls in super structure with CM(1:6) using flyash cement/lime solid blocks with compressive strength of 50Kg/Sq.cm - IS:12894-1990 - class - 5 including cost and conveyance charges of cement and all other materials to site, seigniorage charges, loading & unloading etc. complete for finished item of work as as directed by the Engineer in charge .

Ground floor

First Floor

Plastering 12 mm thick in one coat for superstructure for even faces of walls with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.

Ground floor

First Floor

Plastering with CM, 2 coats, 20 mm thick, base coat in CM (1:6),16 mm thick and top coat in CM(1:4), 4mm thick with Dubara finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.

Ground floor

First Floor

Plastering to ceiling 12 mm thick in one coat in CM(1:3) with sponge finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.

Ground Floor

First Floor

Flooring with a bed of 100mm thick in CC (1:4:8) with 40mm & 20mm size HBG Metal from approved quarry including cost and conveyance charges of cement and all other materials to site, seigniorage charges, labour charges for machine mixing, laying concrete, finishing top surface to the required level, curing etc., complete for finished item of work as directed by the Engineer in charge.

Cement plastered Flooring with CM(1:3), 20mm thick set over CC bed already laid including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges etc. complete.

Ground Floor

First Floor

Supply , providing & applying Hi bond wall putty super fine or acrylic based ready to use surface(white/white off) wall strong WC or equivallent of average thicknesss 1.5 to 2mm thick over plastered surface to prepare the surface even and smooth after throghly brushing the l;surface to remove all the dirty and remains of loose powedered materials, applying paper etc for internal and external walls including schfolding.

Painting the walls (Inside) and ceiling with two coats of Plastic emulsion paint grade-I of reputed make over one coat of primer of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all other materials to site, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.

Painting to walls (out side) with two coats of Weather proof exterior emulsion of reputed (APEX) or equivalent quality paint of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all other materials, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.

Ground floor

First floor

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work.

Supply and fixing of doors with frames shall be of 100x75mm well seasoned best quality Best Teak Wood and the shutter shall be 30mm thick Flush door shutter,solid bond wood block board type with teak ply on both faces confirming to IS:2202 of reputed make or equivalent including supply and fixing of well seasoned best quality Best teak wood frames duly painted with2 coats of syntetic enamel paint over one coat of primer,shutters, labour charges, 4 Nos MS hold fasts, 4 Nos,125 mm powder coated butt hinges, 1No 250 mm powder coated aldrop, 2 Nos 200 mm powder coated tower bolts, 2 Nos 150 mm powder coated handles, 1No. door stopper complete for finished item of work as directed by the Engineer in charge.

Door frame of size 100x75mm with Best Teak Wood including painting with 2 coats of syntetic enamel paint over one coat of primer

Door shutter

Supply and fixing PRE-PAINTED STEEL, WINDOWS&VENTILATORS of NCL or Equivalent make made of pre-painted steel(base steel as per IS 513 of 0.6mm thick "D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a ployester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame should be 46X52mm section for shutter should be 46X46mm section for mullion should be 46X70mm and section for beading should be 18X25mm and section for louvered ventilation should be 33X57mm box section. The windows should be panelled with 5mm thick plain float glass & 4mm pinhead glass for ventilators with ethyl propylene diamine monomer gasket (EPDM). The sections are to be cut to length mitre joined with corner brocket centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated and nylon receiver. Gaskets made of Ethyl propylene diamine monomer(EPDM). Corner brackets made of CRCA with zinc phosphate.

Windows:Double shutter windows with outer frame section size of 46 x 52mm shutter frame section size of 46 x 46mm mullion section size of 46 x 70mm

Providing impervious coat with CM(1:3) 20 mm thick using approved waterproofing compound over terrace including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.

Ground Floor

First Floor

Supplying & fixing of 110mm dia. Rain water down take pipe with PVC Pipes of Prince or sudhakar or equivalent make including cost and conveyance of PVC Pipes, specials, labour charges etc complete.

Supply and fixing of 25mm dia ,2mm thick PVC pipe ( ISI mark) concealed in wall with all required accessories including masonry work and labour charges complete

supply, Wiring with 2 runs of 14/0.3mm (1.0 sqmm) FRLS/HFFR PVC insulated 1100V grade as per IS: 694/1990 specification for Copper cable of reputed makes, ceiling rose, suitable hot dip Galvanized metal box with cover frame to switch control box including all labour chages etc. complete for light, bell, fan and exhaust fan points for finished item of work as directed by the Engineer-in-charge.

Supply and fixing of 16A /6A Modular Socket of Cabtree thames reputed makes with switch control of 6A /10A Modular switch of reputed makes with in a seperate metal box (Independent Mounting) with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

supply, Rrun of 2 of 36/0.3 mm (2.5 sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of reputed make including all labour charges complete.

supply,Run of 1 of 14/0.3mm (1.0 sqmm) FRLS/HFFR PVC insulated 1100V grade as per IS: 694/1990 specification for Copper cable of reputed makes in existing pipe for earth continuity including all labour charges complete.

supply,Run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of reputed makes in existing pipe for mains including all labour charges complete.

Supply and run of 1 of 36/0.3 mm (2.5 sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of reputed makes in existing pipe for earth continuity including all labour charges complete.

Supply and fixing of 8-way VTPN Distribution board suitable for accommodating 4 pole Isolator as incomer with IP 43 Protection as per IS:13032 and suitable for 4Nos T.P.outgoings etc., complete of makes Legrand / Schneider including cost of D.B., 1No.63A FP isolator, 12 Nos. 6-32A 10KA SP MCBs of reputed makes., giving all internal connections and labour charges for surface/flush mounting etc. complete for finished item of work as directed by the Engineer-in-charge.

Supply and fixing of 25 Sqmm 3.5 core XLPE insulated, 1100V grade armoured alluminimum cable as per specification confirming to IS:7098 (Part - I) of reputed makes from Panel board to Distribution Board including all accessories and labour chargesfor giving all connections etc. complete for finished item of work as directed by the Engineer-in-charge.

Supply and fixing of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) of reputed makes of from Panel board to Distribution Board including all accessories and labour charges for Earth work,covering the cable with bricks ,sand cushion and backfilling of trench duly ,cutting of walls and plastering complete for finished item of work as directed by the Engineer-in-charge.

Fixing of 1x 36/40 W LED Patty type tube light luminarie powder coated CRCA sheet steel housing with Copper Chokes and all standard accessories of reputed makes and 1 No. 36/40 W tube light and labour complete for finished item of work as directed by Engineer - In - Charge

Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and labour charges, cost of 40 W bulb etc., complete for finished item of work.

fixing of 48" (1200mm) Sweep ISI mark BEE 5 Star ratedCeiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter with Regulator of reputed makes atomincluding cost and conveyance of all other materials and labour charges complete for finished item of work as directed by the Engineer-in-Charge.

Providing Independent earthing by excavating a trench to a depth of 2.10M in all soils as per size specified in the data using 80mm dia CI earth pipe of 2.50m length with necessary accessories with humepipe ring duly providing stagered holes including filling with equal proportion of salt and charchol in layers and all labour charges etc. complete for small finished item of work.

Supply and run of No.8 SWG copper wire including Cost of all accessories and labour charges complete.

Drilling of holes of dia.100mm to 150mm in RCC slab with Diamond cutter as directed by the Engineer-in-charge.

Supplying and fixing of stainless steel hand railing of height 0.90Mtr using stainless steel pipes of grade SS304 as directed by the Engineer - In - Charge with top rail of 50mm nominal bore, vertical posts of 40mm nominal bore at 1.00Mtr intervals fixed with base plate of 75mm dia using bonding agent and 2Nos of 15mm nominal bore pipes for horizantal supports and anchor fastner and welding, for fixing railing, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all other materials, electrodes, welding charges, cost of all consumables, labour charges etc., complete for finished item of work.

Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 25 mm of any shades. over CC bed already laid with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per Sqm and filling the joints with white cement paste mixed with pigment of matching shade is to be done including cost and conveyance charges of cement and all other materials to site, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer in charge

Supply,fabricati of 8mm iron Chequered plates(This Item is to be provided over cable trunch in the control room size as directed by Engineer

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM(1:8) , 12 mm thick over CC bed already laid with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per Sqm and filling the joints with white cement paste mixed with pigment of matching shade is to be done including cost and conveyance charges of cement and all other materials to site, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer in charge.

Dadooing in toilets and bath rooms with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts1 to 15) of any colour and finish in all shades and designsglazed coloured tiles of approved size 1st quality 6 mm thick set over a base coat of CM(1:3) 12 mm thick with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per Sqm and filling the joints with white cement paste mixed with pigment of matching shade is to be done including cost and conveyance charges of cement and all other materials to site, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer in charge.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all other materials like cement, sand water and tiles etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st qualityconforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap ISI Mark including cost and conveyance of water closet, P or S trap and all other materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work

Supplying and fixing of PVC low level systern parry ware, slim line with internal components & short bend: 10Ltrs capacity Dual Flush including cost and conveyance of tank and all other materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including cost and conveyance charges and all other materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge

Fixing (550mm x 400 mm) Indian make Flat back wash hand basin(HSW/ Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P.Fitting with parallel pipe thread confirming to IS:2963-1979 and fitting with 15 mm nominal bore Chromium plated pillar tap of 1st quality Indian make 400gms complete with standard CI brackets including wooden block etc. complete for finished item of work as directed by the Engineer in charge of work

Supply and fixing of Steel Taps

Supply and fixing of CP Long body bib cock fancy type delux heavy duty 12.7mm dia Indian make including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge

Supply and fixing of CP Short body bib cock fancy type delux heavy duty 12.7mm dia Indian make including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of reputed make including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge

Supply and fixing of Angle stop cock 12.7 mm dia first quality Indian make heavy duty including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge

Construction of Manholes of size 457.2x457.2mm brick in CM(1:6) proportion masonary Inspection chamber upto 914.4mm depth and fitted with suitable CI frame and cover of 20 kg including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge

Toilet Door and Door frame

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work .

Supply & fixing by using of 100x50mm 'B' class square pipe with other MS items fabrication, transportation,erection with Galvolume sheet roofing for Head room(6.1x2.8Mts)

Providing of roofing with 0.50mm thick Galvanized/ Prepainted G.I. Profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washers side laps are stitched with self tapping/drilling screws. End laps are to be sealed with 25x3mm. Butyl tape. The sheets are provided with anti capillary grove.

Supply and fixing of Alluminium windows with best quality pilyester power coated Alluminium frame with glass( fixed below the top beams for ventilation purpose)

Supply and fixing of Alluminium Jollys for fxing at front elivation Alluiminium windows.

Laying of hume pipe of 300 mm diameter for cables at road crossing points including cost of all materials and labour complete

Supply and fixing of 150mm dia G.I.Pipe for placing the 33KV XLPE 400Sqmm UG Cable from 70 Sqmm to 400 Sqmm including cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of 100mm dia G.I.Pipe for placing the 33KV XLPE 400Sqmm UG Cable from 70 Sqmm to 400 Sqmm including cost and conveyance of materials and labour charges etc., complete.

Construction of Piller mounted distribution Transformer using RCC as per sketch

Supply and fixing of Glowsign name board of size 4.0x1.2Mt

Supply and fixing of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. reputed Makes: including cost and conveyance of materials and labour charges etc., complete.

Constrcution of Compound wall arround the substation (11 Nos.).

Earth work excavation

Earth work

Augoring & borning

Filling of sand below and sides of the foundation

Plain cement concrete 1:4:8 propotion

RCC footing, plinth beams, columns

a) Under reamed piles

b) Plinth beam

c) Columns

Re-inforcement steel

Masanary work in CM (1:6) proportion with red clay brick solid block of size 23X11X7 CMS

Plastering 12mm thick even faces of walls with (1:5) with smooth finish

Plastering 20mm thick uneven faces of walls with (1:5) with smooth finish

Painting the walls two coats of plastic emulsion grade-1

Supply and instalation of split AC unit 1.5 TR 5 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410Areputed Makes: and cordless remote control and 4.0 KVA Stabilizer. reputed Makes: complete,

1) High Polished Granite 16 to 18 mm thick up to 2.43 M other than black/ premium colours 2) Providing and fixing flooring with full depth jointing and pointing to the Marble/ Granite flooring for any sizes with cement based adhesive in width of 3-5 mm including cost of tiles & other items.

Providing septic tank with 8 nos. RCC Rings of dia.1.22m & height 300mm, top covering with 100mm thick heavy duty RCC Lid of dia.1.22m inculding loading, unloading & cost and conveyance of all materials and labour charge lowering the ring into the pit, packing the joints neatly with CM (1:3) 12mm thick, back filling the sides with excavated earth (including earth work excavation for pit) ,all operational and incidental charges etc., complete for finished item of work as directed by the Engineer-in-charge.

fixing in walls,ground different dia PVC Pipes of Prince or sudhakar or equivalent make for sewer lines including cost and conveyance of PVC Pipes, specials, PVC cowls labour charges etc complete.

75 mm dia.( 4kg/cm2)

110mm dia.(4 kg/cm2)

Back filling of foundations with excavated soils in switch yard layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of all materials, labour charges, hire charges of T&P, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Supply and spreading of 6mm Chips (HBG Metal) with a band of 75 mm height uniformily throughout the switchyard including cost & conveyance of all materials, labour charges etc. complete

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with double under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

380mm dia 4.50Mtr long double under reamed Piles

450mm dia 4.50Mtr long double under reamed Piles

Electrical works

Erection, and wiring complete as per departmental standards including testing and commissioning of outdoor type 3Ph, 8 MVA, 33/11KV Oil Type Power transformer with ON LOAD TAP Changer all accessories like radiators, conservator etc., loading, unloading and transportation of power transformers, fixing of radiators, filling of transformer oil complete, to the substation site.

Fixing of 105 lb rail poles of 3 Mtr. Length each over the transformer plinth including cost of rail poles, with stoppers.

Laying foundations for PTRs including shoring, shuttering, and dewatering the pits before and during the process of laying concrete in following proportions and curing for 14 days (Rate quoted shall be inclusive of fixing and concreting foundation bolts wherever necessary) (Sketches enclosed) (as per technical specification), for 2 Nos 8 MVA PTR ( 1No for future use)

Cement concrete 1:3:6 using 12 to 20 mm H.B.G.metal

Cement concrete 1:4:8 using 20 to 40 mm H.B.G.metal

Erection, and wiring complete as per departmental standards including testing and commissioning of the following equipment including all incidental handling by skilled, unskilled personnel, T&P bolts and nuts required etc. complete. Any drilling, welding, grouting jobs, slab holes etc. connected with the above works has to be carriedout and the rate quoted is including of all the jobs as per the technical specification.

Indoor 33KV switchgear for incoming cubicles & transformer incoming cubicles .33KV, 25KA 1250A Vaccum type indoor switchgear with drawout type type circuit breakers of APSPDCL approved make for incommers, transformer control cubicles, feeder cubicles complete with aluminium bus bar connectors/control cables, glands, CTs(class 5p10 & 0.2s)& CR Panels with relays, bus bars and electrical equipment fitted with electrical wiring, annunciation board with digital 3 1/2 digit ammeter & voltmeter and electronic TVR meter make L&T /Secure with mod bus facility (RS 232 port) and MRI compability with class of accuracy 0.2S and numeric relays reputed make as per technical specification.

For feeder cubicles with CTs of ratio 400-200/1-1A

For Transformer cubicles with CTs of ratio 400-200/1-1-1A and differential relay

For Bus Coupler with Bus Riser and CTs of ratio 400-200/1-1A

Erectiom of 33 KV PTs of ratio 33KV/SQRT(3)/110*SQRT(3) of 0.2 class, Burden 25 VA

Erection & commissionming of Indoor 11KV switchgear for outgoing cubicles and tranformer outgoing cubicles 11KV, 25KA 1250A Vacuum type indoor switchgear with drawout type circuit breakers of APSPDCL approved make for transformer control cubicles, feeder cubicles and cubicles complete with aluminium busbar connectors/control cables, glands, CTs & CR Panels with relays (class 0.2s) and electrical equipment fitted with electrical wiring annunciation board with digital 3 1/2 digit ammeter & voltmeter and electronic TVR meter reputed make with mod bus facility (RS 232 port) and MRI compability with class of accuracy 0.5 and numeric relays reputed as per technical specification.

For feeder cubicles with CTs of ratio 200-100/1-1A

For Transformer cubicles with CTs of ratio 600-300/1-1-1A and Aux relay

For Bus Coupler with Bus Riser and CTs of ratio 600-300/1-1A

Station Transformer is to be Provided through indoor switchgear with draw out type dummy Breaker( without Vacuum interrupter and Mechanism)

Erection of 11 KV 3 - Phase PTs of ratio 11 KV/110Volts, Class 0.2, Burden 50VA

Cable side earth trucks

Erection and wiring complete as per departmental standards including testing and commissioning of 3-Ph, 25 KVA 11KV/415V transformer including transport and erection of 1No. 9.1M/280 Kg WL PSCC pole for Single Pole structure for 25 KVA DTR as per drawing including Stay sets complete and cost of mounting arrangement including transport of the DTRs from the stores to the site with all incidental charges etc.,pit excavation of size 0.6x0.6x1.5Mtrs and concreting of pole & stay with all leads. Fixing of 11KV, 200A AB switch, 11KV HG fuse set and LT distribution box, LT knife type 100A fuse units with insulated handle and running of earth complete with erection of 1No. CI earth pipe with flange (80mm dia. 2.5M long and 10mm thick) for neutral and 2 Nos. GI earth pipes with flange (40mm dia, 1.8Mt long) for other earth connections including excavation of pit, erection of earth pipe and supply and refiling the pit with bentonite compound and black cotton soil (in 1:6 ratio) and giving connections as per departmental standards. LT cabling shall be done with LT XLPE 50Sqmm cable and 4mm GI earth wire shall run through suitable size of PVC pipe for vertical run of cable at Dist box as per technical specification. OR Erection of cable using HDD technique

Erection, testing and commissioning of 220V, 100AH sealed, maintenance free battery set with charger and supporting structure complete including supply, erection, testing and commissioning of float/boost chargers suitable for the above batteries with necessary panels as per the technical specification

Laying, testing and commissioning of 3x400Sqmm, 33KV, XLPE armoured cable from 33KV incomming supply point to 33KV incomer cubicle and from 33KV transformer cubicle to HV side of power transformers for 2Nos.8MVA Power Trasnformers in the cable trenches and the cable should run on existing cable GI trays in the trenches with covers and proper clamping arrangements including of providing of suitable glands and lugs wherever necessary with identifications clearly marked on it. Fixing of cable tags at an interval of 10M length and each cable should be identified on both ends including cost of all materials as per the technical specification. All the cables should be run on trays with proper dressing & clamping. ( single run)

Laying, testing and commissioning of 3x400Sqmm, 33KV, XLPE armoured cable from 33KV incomming supply point to 33KV incomer cubicle and from 33KV transformer cubicle to HV side of power transformers for 2Nos.8MVA Power Trasnformers in the cable trenches and the cable should run on existing cable GI trays in the trenches with covers and proper clamping arrangements including of providing of suitable glands and lugs wherever necessary with identifications clearly marked on it. Fixing of cable tags at an interval of 10M length and each cable should be identified on both ends including cost of all materials as per the technical specification. All the cables should be run on trays with proper dressing & clamping. ( double run)

Providing of cable trench of size 500mmx1200mm for laying of 33 KV UG cable of different sizes including earth work excavation of trench of width 500mm and depth1200mm,sand filling upto a depth of 275mm,laying of cable on sand cushion,providing of cable protection cover with 40mm thick Shahabad stone slab of width 450mm,providing UG warning tape of approved make as per standard specification at specified depth and back filling the balance portion with excavated earth,providing cable route idicators at specified intervals, including cost and conveyance of all materials,labour charges,all operational and incidental charges etc. complete for finished item of work as directed by the Engineer-in-charge. ( Single Run)

Providing of cable trench of size 600mmx1200mm for laying of 33 KV UG cable of different sizes including earth work excavation of trench of width 600mm and depth1200mm,sand filling upto a depth of 275mm,laying of cable on sand cushion,providing of cable protection cover with 40mm thick Shahabad stone slab of width 450mm,providing UG warning tape of approved make as per standard specification at specified depth and back filling the balance portion with excavated earth,providing cable route idicators at specified intervals, including cost and conveyance of all materials,labour charges,all operational and incidental charges etc. complete for finished item of work as directed by the Engineer-in-charge. ( Double Run)

Making terminations, testing and commissioning of 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits suitable for indoor breakers.

Straight Through type

end termination type

Power cable for 11KV supply

Laying, testing and commissioning of 11KV 185Sq.mm XLPE armoured cable from LV side of 2Nos. 8 MVA power transformer to 11KV transformer cubicle, from 11KV outgoing feeder cubicles to 11KV outgoing supply and from 11KV adopter for station transformer cubicle to station transformer in the cable trenches and the cable should run on cable GI trays in the trenches with covers and proper clamping arrangements including of providing of suitable glands and lugs wherever necessary with identifications clearly marked on it. Fixing of cable tags at an interval of 10M length and each cable should be identified on both ends including cost of all materials as per the technical specification. All the cables should be run on trays with proper dressing & clamping ( Single run)

Laying, testing and commissioning of 11KV 185Sq.mm XLPE armoured cable from LV side of 2Nos. 8 MVA power transformer to 11KV transformer cubicle, from 11KV outgoing feeder cubicles to 11KV outgoing supply and from 11KV adopter for station transformer cubicle to station transformer in the cable trenches and the cable should run on cable GI trays in the trenches with covers and proper clamping arrangements including of providing of suitable glands and lugs wherever necessary with identifications clearly marked on it. Fixing of cable tags at an interval of 10M length and each cable should be identified on both ends including cost of all materials as per the technical specification. All the cables should be run on trays with proper dressing & clamping ( Double run)

Excavation of cable trench of width 0.50mts X and 1.0 mtrs depth from road level and filling with sand for 50 mm and laying of 11 KV 3 X 185 Sq.mm XLPE UG Cable on cable trays and covering the cable with a sand layer of 250mm above, providing of protective cover of shabed stones (0.3x0.5m) with 2 inch thickness over the sand and backfilling the trench with earth, leveling removing the debris if any including other materials complete and as per the instructions of Engineer-in-Charge.( single run)

Excavation of cable trench of width 0.60mts X and 1.0 mtrs depth from road level and filling with sand for 50 mm and laying of 11 KV 3 X 185 Sq.mm XLPE UG Cable on cable trays and covering the cable with a sand layer of 250mm above, providing of protective cover of shabed stones (0.3x0.6m) with 2 inch thickness over the sand and backfilling the trench with earth, leveling removing the debris if any including other material complete and as per the instructions of Engineer-in-Charge. ( Double run)

Making end terminations, testing and commissioning of 11KV, 3cx185Sqmm, XLPE armoured cable with heat shrinkable cable end termination kits suitable for indoor type

Straight Through type

end termination type

Laying, testing and commissioning of LT 3 1/2C 70Sq.mm XLPE armoured cable from station transformer to main distribution box should run partly under the ground and partly on tray with proper dressing & clamping with Excavation of cable trench & backfilling upto level

Control cables :

laying of various sizes of control cables in the cable trenches and the cable should run on cable GI trays in the trenches with covers and proper clamping arrangements and providing of suitable glands and lugs and junction boxes wherever necessary

2 Core 2.5Sq.mm copper cable for all breakers from DC distribution box

4 Core 2.5 Sq.mm copper cable from battery to DC distribution box

10 Core 2.5 Sq.mm Copper cable

Supply and erection of ladder type, G.I cable trays for

Installation of 450 mm x 50 mm x 2 mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the stone masonary wall by providing hole in the wall wherever necessary and also including necessary masonary work etc. complete as per IS as per the direction of the Engineer-in-Charge. for power cables.

Erection of LT AC Panel Board with 2/1.6 mm thick MS Sheet with powder coating suitably fixing with 63 Amps TPN MCB (I/C) and 12Nos. 2pole 32 Amps MCBs, Digital Volt meter , Digital Ammeter & LED indication lamps including giving all connections as per directions of Engineer - in Charge

Erection of DC Panel Board with 2/1.6 mm thick MS Sheet with powder coating suitably fixing with 12 Nos.2 pole 32 Amps MCBs, Digital Volt meter , Digital Ammeter & LED indication lamps and providing common alarm system with lamp indication for each VCBs & PTRsand suitable alarm accepatance including giving all connections as per directions of Engineer - in Charge

Excavation of earth pit, putting cast iron pipe with flange on one end (as per ISS 718/74) of nominal dia 150 mm and 2.75 meters long (for PTR neutral and LAs) inside the pit and back filling the pit with bentonite compound and black cotton soil, and filling the earth pit with Bentonite Powder including back filling, cement collar of size 600mm dia and 600 mm hight as per departmental standards, including cost of all materials, labour etc. complete.

Excavation of earth pit, putting cast iron pipe with flange on one end (as per ISS 718/74) of nominal dia 80 mm and 2.5 meters long (for the balance earth electrodes) inside the pit and back filling the pit with bentonite compound and black cotton soil, and filling the earth pit with Bentonite Powder including back filling, cement collar of size 600mm dia and 600 mm hight as per departmental standards, including cost of materials, labour etc. complete.

Connecting of neutral of PTR to earth pit with 75x8mm and 50x6mm M.S Flat. Run both flats by over laping as one from neutral stud to earth pit terminating with 2 Nos. flexible copper jumpers of size 50 x 6 mm 15 inches length. Necessary support structure with post type insulators are to be provided including cost of materials, labour etc. complete.

Connecting of earth mat(grid) and connection between earth electrodes and earth grid with 75x8mm and 50x6mm M.S Flat including cost of materials, labour etc. complete.

Fixing of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket with Fire bucket stand fabricated by M.S.angles to install for four numbers of buckets as per local fire officers standards

Fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty Including transportation charges etc complete. reputed Makes:

Fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 2 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 3.6 kg, empty wt.1.6 kg, Discharge time minimum 8 sec, controllable discharge mechanism, range min. 2 mts applicable on classes A,B, C & electrically started fire, A rating -2 A, B rating -21 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete. reputed makes

Supply & Erection of Synthetic Rubber Mats as Per IS 15652 in control room 2.5 mm thick

Supply & Erection of PVC Mats as Per IS in control room 6 mm thick

Erection and transportation of 56W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass and tubular pole, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 110 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. a) LUMINAIRE MAKE :reputed make b) LED MAKE : reputed make

Supply and spreading of quarry dust to a thickness of 25mm, (after consolidation of the earth work with a roller) around the PTR

Supply and spreading of 20 mm size machine crushed blue granite metal to a thickness of 75 mm over spread quarry dust, around the PTR in the out door yard

Laying of cable & Fixing of GI Pipe 100mm for 11KV cable take off / tapping arranements

Laying of cable & Fixing of GI Pipe 150mm for 33KV cable take off / tapping arranements

Borewell (11 Nos.)

Cost towards drilling of borewell 6" dia with power rig clear in all stratas hard rock, loose soils over harden reaming the bore to suit 160 mm bore well casing pipe and flushing the bore at an average pressure of 100 psi and fixing the coupling conducting yield test including transporting, ground water survey.

Fixing of Casing with heavy duty PVC rigid pipe of 160mm dia double socket PVC/SWR pipe 6Kg/Sq.cm - ISI Brand including cost and conveyance of materials, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - charge

Erecting, ISI mark submersible 2.0 HP, Single Phase 25 stages pumpset suitable for 106 / 160 mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V , 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including Direct - on - Line reputed make starters fitted in sheet metal box size of 265 x 295 x 110mm suitable enclosure for single phase motors up to 3 HP at 220V 50Hz operating range between 80 to 240 Volts with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make MCB, all operational and incidental charges complete for finished item work as directed by the Engineer-in-charge.

Fabrication, transportation and Erection of sutable size panel board for single phase submersible mortor above 2HP to 3HP consisting of relay, contactor, staring and running capacitors, Voltmetar ammeter,indicator lamp, MCB, on/off switch.

Erection of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR / EBXL PVC insulated ISI Copper cable of reputed makes in existing pipe for mains including all labour charges complete.

providing and placing on terrace (at all floor levels) Polyethylene 1000 Lts. water storage tank double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings and base support for tanks etc., complete for finished item of work as directed by the Engineer-in-charge.

Erection of 32mm dia.HDPE pipe confirming to IS 4984-1995 including transportation charges etc.complete(PE-100 grade) 16kg/cm2 including cost and conveyance of all materials,leads and lifts etc., complete for finished item of work as directed by the Engineer - In - Charge

Erection and fixing of different dia.reputed make or equivalent UPVC Pipes and fittings to meet the requirment of ASTM D-2896 and are produced in CTS cupper tabe size 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from identical UPVC compounds having the same physical properties for hot and cold water including labour charges for laying fixing and commissioning the pipes etc complete for finshed item of work.

32mm dia UPVC pipe

25mm dia UPVC pipe

20mm dia UPVC pipe

Erection and fixing of GM Gate ( GM peet) valves as per IS 778 Class I -Indian make heavy type of different sizes including cost and conveyance of all materials and labour Charges complete for finished item work as directed by the Engineer-in-charge..

32 mm GM Gate valve

25 mm GM Gate valve

33KV Line

UG Cable (5.93 KM)

Excavation of cable trench from road level and filling with sand of 100 mm and Laying, testing & Commissioning of 33 KV 3 X 400 Sq.mm XLPE UG Cable on cable trench and covering the cable with V trough as protective cover, over the V trough filling with sand of 100mm ,providing warning tape and backfilling the trench with earth, leveling removing the debris if any including the other materials wherever the required depth is not obtained due to field conditions as per the instructions of Engineer-in-Charge.

Single run - Trench size of width 0.50mts X and 1.2 mtrs depth

Double run - Trench size of width 0.60mts X and 1.2 mtrs depth

Jointing, testing & commissioning of Straight Through type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits

Jointing, testing & commissioning of end termination outdoor type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits

Erection, testing & commissioning of 33KV Line type Lightening arrestors including other materials

Erection, installation of 300mm DWC/GI Pipe thickness 5mm

33KV OH Line

4 Nos. of M+6 Tower For 33 KV Line

Fabrication of tower parts as per specification

Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)

RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.

Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,

Track welding of total tower nuts and bolts

Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,

Supply & Fixing of 11 KV Danger Board

Providing Anticlimbing arrangment with GI Barbared wire for M+6 tower up to height of 10 feet including cost of materials and Labour

Transport of materials to site including loading and unloading

4 Nos. of M+9 Tower For 33 KV Line

Fabrication of tower parts as per specification

Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)

RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.

Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,

Track welding of total tower nuts and bolts

Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,

Supply & Fixing of 11 KV Danger Board

Providing Anticlimbing arrangment with GI Barbared wire for M+9 tower up to height of 10 feet including cost of materials and Labour

Transport of materials to site including loading and unloading

3 Nos. of M+12 Tower For 33 KV Line

Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)

RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.

Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,

Track welding of total tower nuts and bolts

Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,

Supply & Fixing of 11 KV Danger Board

Providing Anticlimbing arrangment with GI Barbared wire for M+12 tower up to height of 10 feet including cost of materials and Labour

Transport of materials to site including loading and unloading

Erection of 33KV lines over 12.5m Spun poles (9.2 KM)

Excavation of pole pit of size 0.75x0.75x2.1 Mtrs for 12.5Mts SPUN poles including dewatering, shoring and shuttering where-ever necessary and back filling the pits and ramming (after erection of pole) with excavated earth/extra earth/ excavated rock bits if any and leveling the site as per technical specification in section-5 without any lead. All soils except hard gravel, hard morum and hard rock/ disintegrated rock

Excavation of Stay pits of size 0.45x 0.45x1.34 Mtrs for burying anchor rods with the anchor plates for stay sets including dewatering, shoring & shuttering wherever necessary and back filliing and ramming (after burrying of anchor rods with anchor plate), the pits with excavated earth/extra earth / excavated rock bits if any and leveling the site as per technical specification without any leads In all soils except hard gravel, hard morum and hard rock/disintegrated rock

Excavation of strut pit of size 0.5x0.5x1.5Mtrs for 9.1Mts PSCC poles including dewatering, shoring and shuttering where-ever necessary and back filling and ramming the pits with excavated earth/extra earth/excavation rock bits if any and leveling the site after erection of strut as per technical specification without any lead In all soils except hard gravel, hard morum and hard rock/ disintegrated rock

Erection of 12.5Mtrs.Spun poles including earth coils, cross arms/side arm, top cleats, insulators complete with hardware wherever necessary (but excluding the cost of pit excavation, concreting and backfilling)

Erection of stay sets with Guy Insulator & 7/3.15mm GI Stay wire complete including fixing of bow, fixing and binding of eye bolt, anchor rod, guy insulator thimbles as per clause 10 of section 5 exluding the cost of pit thinples excavation, concreting and back filling.

Erection of 9.1Mtrs/280Kg WL PSCC poles as struts complete including fixing of strut clamps and cost of pole excluding the cost of pit excavation, concreting and back filling

Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky for base concreting 20 mm H.B.G. metal to be used. Concreting of Spun pole location including base concreting of size .75x0.75x2.1Mts.(0.1 Mt for basse concreting)

Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky Concreting of strut location as per section-5 of size 0.5x0.5x1.5Mtrs.

Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky.Concreting of stay location of size 0.45x0.45x1.34 Mtrs

Erection of line DP structure with poles as per drawing enclosed at various locations including supply and erection of 6nos polymer insulators with hard ware and 3Nos. 33KV pin insulators with pins including jumpering providing suitable size alluminium T' clamps (but excluding pit excavation and concreting of poles) including supply and erection of 1 No. GI earth pipe with flange (40mm dia, 1.8Mt long) as per drawing, double earthing should be done for all the structure parts including AB switch with 4mm GI wire and coil earthing is to be done for AB switch handle erection of earth pipe and supply and refiling the earth pit with bentonite compound and black cotton soil (in 1:6 ratio) and giving connections as per departmental standards as per drawing enclosed spun pipe of 2 feet dia. and 2 feet height shall be provided around each earth electrode and all the earth wires should run through 1"dia PVC pipe 3' above the ground level and 2' below the grond level along the pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip). Line D.P. with A.B.Switch with 12.5 Mts Spun poles

Paving out the 100Sqmm AAA conductor & supply of connected other materials including transport charges to the work location, loading & unloading charges, stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulator binding etc. comprising of three conductors including cost of all the materials duly maintaining ground clearances as per technical specification Note : One route KM means three KM lengths of single conductor.

Supply and fixing of danger Boards

Vertical Formation: Erection of pole and Supply & fixing of 6 Nos. of polymer strain insulators with metal parts with Horizontal cross arms with 100x50mm channel, 75x8mm back clamps, and double jumpering & providing alluminium 'T' clamps of suitable size excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip) With 12.5 Mtrs Spun Poles

Single Pole cut point : Supply & erection of pole and supply & fixing of 2Nos. 6ft, 100x50mm channel horizantal cross arms supported by 65x65x6mm MS angle as struts, fish plates, 6 Nos. of Polymer strain insulators with metal parts, back clamps and jumpering with support of 3Nos. 33KV pin insulators with pins and providing aluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip) With 12.5Mtrs Spun Poles

Single Pole angle cut point including supply & erection of pole and supply & fixing of 4Nos. 6ft, 100x50mm channel horizantal cross arms supported by 65x65x6mm MS angle as struts, MS Flat for fish plates &Back clamps, 6 Nos. of Polymer strain insulators with metal parts and jumpering with support of 3Nos. 33KV pin insulators with pins & providing aluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip) With 12.5Mtrs Spun Poles

Fixing of tapping cross arms (2Nos. 6ft, 100x50mm channel horizantal) supported by 65x65x6mm MS angle as struts on either sides, fish plates with MS Flat 75x8mm, back clamps, and 3 Nos. of Polymer strain insulators with metal parts and jumpering & providing alluminium 'T' clamps of suitable size at the tapping/dead end locations of the 33KV line (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip)

Fixing of 3 Nos. of Polymer Strain insulators with metal parts for all the three phases at substation end including double jumpering and providing alluminium 'T' clamps of suitable size (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)

Numbering of poles with white paint and AC black paint as back ground

Erection of LT 3-Ph cross arms LT pin insulator complete with hardware wherever necessary on existing poles

Erection of Side arm with strut angle OR V cross arm and H x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole (11KV line)

11KV Line

UG Cable (6.90 KM)

Excavation of cable trench from road level and filling with sand of 100 mm and Laying, testing & Commissioning of 3x185Sqmm, 11KV, XLPE UG Cable on cable trench and covering the cable with V trough as protective cover, over the V trough filling with sand of 100mm ,providing warning tape and backfilling the trench with earth, leveling removing the debris if any including the other materails wherever the required depth is not obtained due to field conditions as per the instructions of Engineer-in-Charge.

Single run - Trench size of width 0.50mts X and 1.2 mtrs depth

Double run - Trench size of width 0.60mts X and 1.2 mtrs depth

Erection, testing, commissioning of Straight Through type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits

Erection, testing, commissioning of end termination outdoor type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits

Erection, installation of 300mm DWC/GI Pipe thickness 5mm

Erection of 11KV lines over 11M Spun poles (32 KM)

Excavation of pole pit of size 0.6x0.6x1.75Mtrs including dewatering, shoring and shuttering where-ever necessary and back filling the pits and ramming (after erection of pole) with excavated earth/extra earthy/ excavation rock bits if any and leveling the site without any leads.All soils including hard gravel, hard morum and hard rock/disintegrated rock

Excavation of Stay pits of size 0.45x 0.45x1.34Mtrs (0.272Cum) for burying Anchor rods with the anchor plates for stay sets including dewatering, shoring & shuttering wherever necessary and back filling and ramming (after burrying of anchor rods with anchor plate), the pits with excavated earth/ extra earth / excavated rock bits if any and leveling the site without any leads.In all soils including hard gravel, hard morum and hard rock/disintegrated rocks.

Excavation of strut pit of size 0.45x0.45x1.34Mtrs including dewatering, shoring and shuttering where-ever necessary and back filling and ramming the pits with excavated earth/extra earth/excavation rock bits if any and leveling the site after erection of strut as per technical specification without any lead.In all soils including hard gravel, hard morum and hard rock/disintegrated rock

Erection of 11 Mtrs Spun poles including earth coils, cross arms/side arms, top cleats, pin insulator complete with hardware wherever necessary (but excluding the cost of pit excavation, concreting and back filling)

Erection of line DP structure with 2Nos. 11 Mtrs. Spun poles, 4 Nos 100 x 50 mm channel 6 feet with 50 x50 x 6 mm MS angle 9 feet with struts/Stays as per drawing enclosed at various locations including supply and erection of 11KV Polymer string insulator with hard ware, 11KV pin insulators with pins including single jumpering providing suitable size alluminium 'T' clamps including supply and erection of 1 No. GI earth pipe with flange (40mm dia, 1.8Mt long) as per drawing (but excluding cost of pit excavation,concreting of poles and struts/Stays), double earthing should be done for all the structure parts including AB switch with 4mm GI wire and coil earthing is to be done for AB switch handle, erection of earth pipe and supply and refiling the earth pit with bentonite compound and black cotton soil (in 1:6 ratio) and giving connections as per departmental standards as per drawing enclosed Cement Collar of 2 feet dia. and 2 feet height shall be provided around each earth electrode and all the earth wires should run through 1"dia PVCpipe 3' above the ground level and 2' below the grond level along the pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip) Line D.P. with AB Switch

Erection of MS stay set with HT Guy insulator & 7/3.15mm GI Stay wire complete including fixing of bow, fixing & binding of eye bolt, anchor rod, guy insulator excluding the cost of pit excavation, concreting and back filling

Erection of 9.1 Mtrs PSCC poles as struts complete including fixing of strut clamps excluding pit excavation, concreting and back filling

Concreting the locations one in every five locations and cut points VFs, stays & DPs with 1:3:6 mix cement concrete with 20mm HBG metal including cost of all the materials and curing dewatering the pits before and after concreting viz., dry, wet partially submerged, fully submerged, rocky For base concreting 20mm H.B.G. metal to be used for 0.1Mt

Concreting of pole location including Base concreting of size 0.6x0.6x1.75Mtrs

Concreting of stay location of size 0.45x0.45x1.34Mtrs (for all locations)

Concreting of strut location of size 0.45x0.45x1.34Mtrs

Paving out the 100sqmm conductor including transport charges from the store to the work location and including loading and unloading charges and stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulator binding etc. comprising of three conductors including cost of all the materials duly maintaining ground clearances as per technical specification and providing suitable alluminium double ferrules (inner & outer) wherever midspan jointing is required. (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip) 100Sq.mm All Aluminium Alloy Conductor. (One Route KM means 3KM length of single conductor)

Supply and Fixing of danger Boards

Vertical Formation: Erection 11 Mts Spun poles and supply & fixing of 6 Nos.11KV Polymer string insulator C&T type with metal parts, 3Nos. 11KV pin insulators with pins to horizantal cross arms (100x50mm), top cleat and back clamps. Clamping, double jumpering and providing alluminium 'T' clamps of suitable size excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)

Single Pole cut point: Erection of 11 Mts Spun pole and Supply & fixing of 6 Nos. Polymer string insulator C&T type with metal parts, 3Nos. pin insulators with pins to 2Nos. 5ft, 100 x 50 mm horizantal cross arms supported by 50x50x6mm MS angle as struts and fish plates and back clamps etc., double Jumpering & providing alluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip)

Angle cut point: Erection of 11Mtrs Spun poles with struts/stays and Supply & fixing of 6 Nos. Polymer string insulator C&T type with metal parts, 3Nos. pin insulators with pins to 2Nos. 5ft, 100 x 50 mm horizantal cross arms supported by 50x50x6mm MS angle as struts and fish plates and top cleat, back clamps etc., double Jumpering & providing alluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip)

Fixing of tapping cross arm (horizantal) supported by 50x50x6mm MS angle as strut, back clamps, 3Nos. 11KV Polymer string insulator with metal parts, double jumpering with support of pin insulators & providing alluminium 'T' clamps of suitable size at the tapping/dead end locations of the 11KV line (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)

Fixing of 3 Sets of Polymer string insulator with metal parts for all the three phases at substation end including double jumpering and providing alluminium 'T' clamps of suitable size (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)

Numbering of poles with white paint and AC black paint as background

Erection of Side arm with strut angle OR V cross arm and Horizontal x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole

Erection of LT 3 phase cross arm LT pin insulators complete with hardware wherever necessary on existing pole

Erection of UG Cable at Railway Crossing (3 Crossings)

300mm dia digging by boaring technique method in railway boundary upto DP as per railway standards

Laying of 300mm dia 5mm thick GI pipe under the railway track upto DP by boaring technique method with complete welding work for pipes as per railway standards

Laying of 3X400 Sq.mm UG cable upto DP

Laying of extra cable by rings

Erection of 125mm dia 3mm thick MS pipes vertically from bottom to top of DP & laying of 3X400 Sq.mm cable through pipes in complete shape

Erection of out door pipe heat shrinkable jointing kits of 3X400 Sq.mm cable

Fixing of sign boards indicating 33KV crossing with concrete plinth

Excavation of earth pit, putting cast iron pipe with flange on one end (as per ISS 718/74) of nominal inner dia 80 mm, 9.5mm thickness and 2.75 meters long. inside the pit and back filling the pit with bentonite powder and soil with ratio 1:4 including cost of C.I pipe, cement collar, bentonite compound etc., and labour charges complete (as per the Sketches).

Supply & Running of 50*6 mm earth flat, connecting to all the earth pits and equipments, with G.I bolts & nuts, welding duly fixing to supports neatly with suitable size of clamps

FORMATION OF WBM APPROACH ROAD:

Collection and supply of gravel including stacking at site for premeasurement etc., complete.

Spreading gravel of 150 mm thick for embankmentwatering and consolidation with power roller (8 to 10 tons capacity) rolling including here charges of rollerbarricading etc., complete.

Collection and supply of 65 mm HBG metal and stacking at site for pre-measurements etc., complete.

Spreading of 65 mm HBG metal 150 mm thick compacted to 100 mm thick including spreading gravel for bending, sectioning, watering and rolling with power roller of 8-10 tons capacity as per IS

PLR Projects Private Limited

Sealwel Corporation Private Limited

PLR Projects Private Limited

Sealwel Corporation Private Limited

PLR Projects Private Limited

Sealwel Corporation Private Limited

GVS Projects Pvt Ltd

PLR Projects Private Limited