Annual Maintenance Contract of 110 OR 125 KVA BFL DG Set Installed at various BOPs under SHQ BSF KNR

Amount

Annual maintenance contract of 110/125 KVA BFL DG Set ( make of Ashok Leyland/Kirloskar/ cummins ) installed at verious BOPs under SHQ BSF KNR. Routine Maintenence - once in a month, Repair and maintenence on call as and when fault occurs

Routine Maintenance job details :- a) To check all external fasteners, b) To check lube oil condition, replacement of lube oil filter, if necessary,c) To check Air- cleaner element, lean/replace as required, d) To check/clean battery terminals, operation of self starter and servive, if required, e) To ckeck working of electrical system and alternator, f) To check liner and cylinder head fins of air-cooled engine, g) To check radiator fins , if chocked arrange cleaning, h) To check engine hour meter and rectify, if reqired, i) To check belt alignment/tension, re-set as necessary, j) To check fuel line, bleed system, fuel tank and quantity-adequate or not report, k) To ckeck/clean button filter on fuel feed pump and check fuel filters and replace, if necessary, l) To ckeck for leackage in all system, as necessary, m) To ckeck / tighten foundation bolts, coupling bolts, n) Run engine on no load for 5 minutes and check,- (i) working of all gauges and meters, (ii) Any abnormality and vibration. Correct these, if necessary. o) To check turbocharger, piping & lubrication of turbocharger, p) To ckeck driven equipment ( for P.G application ) -terminals/connection for looseness & rectify, q) To check control panel, blow and clean/service, if required, r) To check AMF panel oprations- in auto & manual modes, s) To check all fueses and its tightness, t) To check all bateery charger - Voltage and current in boost and trickle condition, u) To check all meter - Voltage, current, terminals and frequency and rectify, if required, v) To check all wire, terminals and connections etc and rectify, if required, w) To ckeck all lamp and holders and replace, if required, x) To check all relays, connectors, transformers etc. And rectify, if rquired, y) To check heating of all apparatus and componets ( mechanical and electrical) of the system, z) To suggest necessity of overhouling of the DG Sets.

TECHNOCON SERVICES

Garuda Power Private Limited