Providing, Laying and Compaction of 75 mm thick DBM, 40 mm thick BC including Prime coat, Tack coat, road marking with thermoplastic paint and ancillary works bet Km 127 to 140 on Simli-Gwaldam road in 66 RCC/ 21 BRTF under Project Shivalik in Uttrak

Amount

Providing and applying “Prime Coat” with bitumen emulsion complying with IS 8887 on prepared surface of WMM including clearing of road surface & spraying primer using mechanical means as per clause No.502 of MORT&H Specification for Road & Bridge Works (5th Revision)

Providing and applying “Tack Coat” with bitumen emulsion using emulsion pressure distributor on prepared bituminous/granular surface cleaned with mechanical broom, all complete as per clause 503 of MORT&H Specification for Road & Bridge Works (5th Revision) and all as specified in particular specifications

Providing and laying of “75 mm thick consolidated DBM” layer after providing Prime Coat as per clause No.502 of MORT&H Specification for Road & Bridge Works (5th Revision), precoated stone aggregates physical requirements/grading/mix composition as per Table 500-8, 500-9, 500-10 & 500-11 of MORT&H specifications for road & Bridge works (Fifth Revision) mixed with minimum 4.5% bitumen VG-10 complying with Indian Standard Specification IS:73 laid with sensor paver finisher and rolled as per Clause 501.6 and 501.7 of MORT&H specifications for road & Bridge works (Fifth Revision) and achieve desired compaction (including cost of conveyance of mix) and all as specified as per Particulars Specifications.

Providing and laying of “40 mm thick consolidated BC” layer after providing Tack Coat as per clause No.503 of MORT&H Specification for Road & Bridge Works (5th Revision), precoated stone aggregates physical requirements/grading/mix composition as per Table 500-16, 500-17, & 500-11 of MORT&H specifications for road & Bridge works (Fifth Revision) mixed with minimum 5.4% bitumen VG-10 complying with Indian Standard Specification IS:73 laid with sensor paver finisher and rolled as per Clause 501.6 and 501.7 of MORT&H specifications for road & Bridge works (Fifth Revision), achieve desired compaction (including cost of conveyance of mix).

Road Marking (Edge Line) with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface as per Clause 803.4 of MoRT&H Specification for Road & Bridge works (Fifth Revision) and Particular Specifications

Providing and fixing of retro- reflectorised Warning/Cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as Particular specifications and as directed by Engineer -in -charge /OC contract

Providing and fixing of Cat Eyes (Road Stud) 100x100 mm, fitted with lens reflectors as per Para 804 of MoRT&H Specification Road & Bridge works (Fifth Revision) and as directed by Engineer-in-charge/OC contract

Providing and installation of retro reflective delineators (900 mm) as per MORT&H specifications Para 806, Particular specifications and as directed by Engineer -in -charge /OC contract.

Provisioning and fixing of "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 75x150x5 mm spaced 2 mtr centre- to- centre, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, complete as per clause 811 of MoRT&H specifications and fixed as directed by Engineer-In-Charge/OC contract.

Providing and Fixing of built up Overhead Structure (Gantry) Manufacturing supply, transportation, assembling & erection of 10 mtr. Span Overhead Gantry Structure (as per Particular Specifications and drawings) made up of two single ISI mark pipe of dia 300 NB with a vertical height clearance of 6 mtr from the carriageway, as per drgs attached, using prismatic grade sheeting (Type IX). The structure will be hoisted on existing departmentally constructed RCC foundation. Nuts bolts required for errection will be provided to the Deptt by the contractor

Providing and Fixing of built up Overhead Structure (Gantry) Manufacturing supply, transportation, assembling & erection of Cantilever Structure of 6.0 mtr. Span (as per Particular Specifications & drawings) made up of 350 mm single ISI Mark pipe of a vertical height clearance of 6 mtr from the ground, as per drgs attached, using prismatic grade sheeting (Type IX). . The structure will be hoisted on existing departmentally constructed RCC foundation. Nuts bolts required for erection will be provided to the Deptt by the contractor

MS SHREE GANPATI CONSTRUCTION COMPANY

M/S Agarwal Brothers

HILLWAYS CONSTRUCTION COMPANY PVT LTD

M/s MUKESH TRADING CORPORATION

M/s Jagdish Prasad Hudda