Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC 0 NEAR SATYANARAYAN SOCIETY GAYATRI MANDIR ROAD 0 BHUJ KUTCH GUJARAT 370001 | KACHCHH | GUJARAT | 370001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹22.9 L+₹1.2 L (5.42%)Rejected-Finance BHUJ NAKHTRANA HIGHWAY ROAD AT POST SHUKPAR NAVAVAS BHUJ KUTCHH 370040 GUJ | KACHCHH | GUJARAT | 370040 | L2 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
19 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
COMPREHENSIVE MAINTENANCE B/R AND E/M OF VARIOUS BUILDINGS LOCATED AT OWSA AND NWSA AND OTHER MISC WORKS UNDER GE (AF) BHUJ AT AF STN BHUJ
2023_MES_604687_2
8683/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹46,000
Yes
16 Sept 2023
1 Aug 2023
21 Aug 2023
1 Aug 2023
19 Aug 2023
7 Aug 2023
2 Aug 2023 - 3 Aug 2023
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting any gauge and any thickness sheets in walls, roof covering etc complete all as specified and as directed by Engineer-in-Charge.
Supply & fix mild steel work in tubular trusses/structures of square/round /retangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St.-240 including notching, drilling, fitting, rivetting and or welding or connection bolts and nuts, cleats, gusset plates etc complete all as specified and as directed by Engineer-in-Charge.
Supply & fix mild steel for wind tie for roof including securing bolts including cutting tops to shape as directed, drilling holes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
Supply & fix framed work such as grills, gratings, etc framed, guard bars, railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Material & labour for expanded metal, not less than 4.00 Kg per SQM, and 20mmX20mm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed by Engineer-in-Charge.
Supply & fix pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.
Supply & fix pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new or previously un-treated steel and iron surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old painted iron surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint on steel and iron surfaces complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new or previously un-treated steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces in comouflage complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of plastered or unplastered old decorated external surfaces of walls and applying one coat of exterior emulsion paint in camouflage pattern as approved by the GE complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete unreinforced in ground floors/roof and pavings n.exc 15cm thick (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
Demolition of PCC block masonry built in cement mortar complete all as specified and directed by Engineer-in-Charge.
Material & labour for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate in sub base etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for 100mm thick PCC 1:2:4,type B1,using 20 mm graded stone aggregate as in hard standings/ pavings including use necessary formwork and finishing concrete topping even and fair without using extra cement and spike rolling to surface or making impressions of expanded metal whilst the concrete is green complete all as specified and directed by Engineer-in-Charge.
Material and labour for providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, kerb and the like including weathering slightly rounded or chamfered angles and throating as directed including use of necessary form work complete all as specified and directed by Engineer-in-Charge.
Material & labour for precast cement concrete type C1, (1:5:8) (using 20mm graded stone aggregate) solid block masonry witrh solid blocks, exc. 10 cm in width and setting in mortor (1:4) complete all as specified and as directed.
Taking down cement plaster on block masonry or stone walls etc including raking out joints hacking for key secrubing down with water etc any description etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for 15 mm thick rendering for fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge
Material & labour for 10 mm thick rendering for fair faces of concrete surfaces in CM 1:3 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge
Demolition of reinforced cement concrete in any position complete all as specified and directed by Engineer-in-Charge.
Material and labour for providing precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs for drains, man holes etc set in cement mortal (1:6) complete all as specified and directed by Engineer-in-Charge.
Material & labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Material & labour for cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in bed blocks for fixing of hold fasts complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc 1.0 sqm but n. exc 2.0 sqm complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium door shutters (single/double shutter), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing anodised aluminum snap beading handles in each door, hinges handles anodised snap beading screws hold fast etc. complete all as specified. complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed by Engineer-in-Charge.
Supply only aluminium anodised grill of approved shape with opening in grill 66mmx80mm, 9 mm thick (diagonally) or nearest to +5 mm made out of standard aluminium moulded section of size 6mmx7mm complete all as specified and directed by Engineer-in-Charge.
Supply & fix 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed by Engineer-in-Charge.
Supply & fix 300mm length of mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix 150mm size extruded aluminium alloy handles, fabricated type, complete all as specified and directed by Engineer-in-Charge.
Supply & fix 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & fix 200mm size Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
Supply & fix 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed in door complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation old treated surfaces of wall and applying one coat of white wash including removing of nails, making good holes, cracks etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation olf treated surfaces of ceiling and applying one coat of white wash including removing of nails, making good holes, cracks etc complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound conforming to IS-2465-1975 and/or as approved complete all as specified and directed by Engineer-in-Charge
Material & labour for cement concrete 1:2:4 (using 12.5 graded stone aggregate) 25 mm thickness as in roof padding after applying/ brushing neat cement slurry @ 3.0 Kg of cement per Sqm and levelling maintaining slope complete all as specified and directed by Engineer-in-Charge
Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and over plaster 10 mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 0.3 Litre per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge (WPC shall be mesured and paid seprately)
Material & labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 15 cm long fixed complete all as specified and directed by Engineer-in-Charge
Supply only MS base wheel of dia 100 mm and depth 40 mm long with 2 Nos bal bearing and central pin on each wheel for hanger/BPs door complete all as specified and directed by Engineer-in-Charge
Supply only mild steel top guide roller of dia 100 mm and thickness 50/75 mm, fabricated with nuts and bolts alongwith ball bearing and pin on each roller/pully for hanger/BPs doors complete all as specified and directed by Engineer-in-Charge
Lifting up carefully mechanical means steel hangar/blast pen door leaf of size area n exc 40 sqm each, inspecting the parts/members of doors, including repairs, welding as required, removing unserviceable membbers, unserviceable pully/base wheels/top roller/nut bolt etc and fixing only new parts/members as mentioned herein before, fixing steel door back in same position after proper servicing & greasing for smooth noise-less movement/operation of doors complete all as specified and directed by Engineer-in-Charge Note:- Supply only spare parts to replace unserviceable members, nuts, bolts, wheel, rollers etc shall be measured and paid separately.
Easing, adjusting, cleaning of rails, greasing of base wheels and top guide wheel of hanger/BP door leaf having area not less than 40 sqm each and height not exc 10 m including minor repairs, welding adjusting base wheel and top rollers etc to make the sliding door leaf noise-less smooth operation complete all as specified and directed by Engineer-in-Charge
Welding only exc 2.50 cm but n exc 5 cm in length, thickness ofmetal to be welded exc 6 mm but n exc 9 mm sheets/plates/any other steel members, including cleaning and preparing the surfaces while welding and bevilling of edges as required complete all as specified and directed by Engineer-in-Charge
Material & labour for surface dressing n exc 15cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n exc 30 cm girth and removing rubbish upto a distance of 50m outside the periphery of the area complete all as specified and directed by Engineer-in-Charge.
Taking out settled soil/broken stone aggregates size exc 40 mm to 65 mm at traverse walls area not exc 1.50 m depth and getting out in any type of soils complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil to a distance exc. 250 m but n. exc. 500 m and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base with excavated material complete all as specified and as directed by Engineer-in-Charge.
Taking out soil settled in bed of drain (moving target area) by means of excavation including removing glass, small bushes, shrubs etc and removing the excavated materals to distance exc 50 m but n.exc 100m and deposited were complete all as specified and as directed by Engineer-in-Charge.
Forming embankments including raising earth (solids), spreading in layers n.exc 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc, exc 1.5 m but n.exc. 7.0m high from base of firing range and including mixing saw dust in given ratio complete all as specified and directed by Engineer-in-Charge. Note:(i) Preamble No 3.6 of SSR Pt-I shall be applied for deduction from filling to achieve final volume of payment. (ii) Supply only saw dust will be measured and paid separately.
Supply only saw dust (wastage of wooden saw factory) complete all as specified and directed by Engineer-in-Charge (weight of saw dust bag is not less than 10.0 kg/bag).
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge
Material & labour for 10mm thick rendering on vertical surface in cement motar 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge.
Material & labour for 25mm thick cement concrete type B-O, 1:2:4 using 12.5mm graded stone aggregate in floors etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06 Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over complete all as specified and directed by Engineer-in-Charge. Note: Backing coat of tiles plaster measured and paid separatelly.
Supply & fix in repairs fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engineer-in-Charge.
All as per item No. 64 above but concealed type complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs for shower rose for 15 mm dia, cast chromum plated screwed down high pressure with long shank screwed end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix repairs waste fittings chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (exluding fixing bolts,flushing cistren and flush pipe) and including fixing bolts and plastic water closet seat (black, closed patern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and directed by Engineer-in-Charge.
Supply & fix cast iron 'P' or 'S' traps 100 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fix grating square 150mm size of PTMT (minimum weight 100 gms ) complete all as specified and directed by Engineer-in-Charge.
Material & labour for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge
Supply & fix in repairs PVC low level valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation old treated surfaces of wall surfaces and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, watering and removing surplus soil to a distance not exc 50.0 m and making good surface complete all as specified and as directed by Engineer-in-Charge.
Material & labour for mild steel framed work of angle iron as in sign boards etc of Gde Fe-410 including necessary welding etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for stainless steel pipe conforming to grade 304 as in framed work such as railing, walkway etc and similar work including fixed in floors and wall with drilling and welding complete all as specified and directed by Engineer-in-Charge.
Material & labour for providing PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
Supply & fix of fully retro reflective name plate of engineer grade retro reflective sheeting on 14 gauge (2.00 mm) thick MS sheet. The surface to be reflectorised shall be degreased either by acid or hot alkaline etching and all scale/dust removed to obtain a smooth plain surface before application of retro-reflective sheeting. Front side entire surface is finally bonded with retro reflective sheeting of engineer grade of enclosed lens type consisting of microscopic lens elements embedded beneath the surface of a smooth flexible, transparent, water proof plastic resulting in a non-exposed lens optical reflecting system, having pressure sensitive adhesive, borders, messages (length, leters, numerals etc) as indicated cut out or screen printing back ground in blue colour tape and matter in white colour, having one side writing letters of size 250mmx300mm all as per IRC 67 and non reflective portion thoroughly descaled, cleaned primed and painted with two coats of epoxy paint complete all as specified and directed by Engineer-in-Charge.
Material & labour for mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed by Engineer-in-Charge.
Material and labour for writing letters or figures ( Block, roman , Italic or Indain ) n,exc 30 cm high including stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed by Engineer-in-Charge.
Taking out unserviceable LT cables from trenches/ducts etc of of any size complete all as specified and directed by Engineer-in-Charge.
Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 25 sqmm, 4.0 core complete all as specified and directed by Engineer-in-Charge.
Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 16 sqmm, 4.0 core complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in Soft/ loose soil soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick in soil complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.
Material & labour fo sand cushioning for UG cables using dry river sand; gently punning down complete all as specified and directed by Engineer-in-Charge. ( Note : For measurement purpose punned thickness shall be considered)
Supply and laying unreinforced precast concrete cable cover,class LV type 2 with flat size 300mm x 180mm x 40mm complete all as specified and directed by Engineer-in-Charge.
Supply & fix tubing light grade of 50 mm bore galvanised with all fitting for cable protection trenches / wall / on pole including necessary clamps sets and nut & bolts complete all as specified and directed by Engineer-in-Charge.
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including Material & labour for HDPE pipe of 50 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by Engineer-in-Charge
Material & labour for out door type factory made bus bar chamber of size 0.45x0.75x0.40 m depth made out of CRCA sheet 3.15 mm thick with 4 busbar of capacity 200 Amps internally prewired, including one MCCB 63 Amps 4 pole 415 volt, 16 KA having locking arrangement, provn of suitable hole at bottom for incomming and out going UG cables complete including painting with 2 coat of powder coated paint over a coat of red oxide primer on exterior and interior faces erection of bus bar chamber with suitable qty of PCC 1:2:4, type B2 and supply, fixing and connection of MCCB including earth work and provn of suitable frame a bottom made out of angle iron of size 40x40x6 mm thick(45 mm length on top of PCC and 15 cm in PCC) complete all as specified and directed by Engineer-in-Charge.
Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron strip 25X4mm as earthing lead by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. including testing on completion including the material and labour of the following : - (a) Excavation and earth work for placing electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed by Engineer-in-Charge. (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed by Engineer-in-Charge.. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Earthing complete with copper earth plate electrode 60 cm x60 cm x 3.00 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including copper strip 20X3mm as earthing lead by means of brazing as shown in electrical plate No.3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge including testing on completion including the material and labour of the following : - (a) Excavation and earth work for placing electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed by Engineer-in-Charge (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Taking down old Al strip of any size from pole / walls complete all as specified and directed by Engineer-in-Charge.
Taking down old Al single pointed air termination rod complete all as specified and directed by Engineer-in-Charge.
Supply & fixing single pointed air termination copper rod 12 mm dia, 300 mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing copper strip 20 mm X 3.00 mm complete with saddles and fixing screws for roof conductors and down conductors above ground. complete all as specified and directed by Engineer-in-Charge.
Supply and fixing copper strip 32 mm X 6 mm complete with saddles and fixing screws for ESD by grouting in the wall. complete all as specified and directed by Engineer-in-Charge.
Supply & fix test point terminal block made of gunmetal or phospohorus bronze size 75 x75x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screws complete all as specified and directed by Engineer-in-Charge.
Supply & fix GI pipe light grade of 40 mm bore fixing in PCC complete with elbows, couplers etc and with MS clamps nuts, bolts, washers and etc for fixing of copper strip complete all as specified and directed by Engineer-in-Charge.
Material & labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated but unsheathed cable 1100 volts grade drawn through and including rigid steel ERW conduit of 25 mm dia (external) heavy duty including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded jointsin conduit accessories with teflon tape including 1.5 sqmm single core FRLSH PVC insulated but unsheathed multistranded copper conductor cable as in continuous earth.Wiring shall be suitable for flame proof area as per STEC-7 for the followings:-
One flame proof light point controlled by one,single pole flame proof switch complete all as specified and directed by Engineer-in-Charge.
Supply and fix flame proof and weather proof rotary type switch,16 Amps,230 Volts,AC single pole, (LM-6) aluminium alloywith flame proof cable entry glands CMRS certified,ISI marked complete all as specified and directed by Engineer-in-Charge
Supply and fixing LED light fitting 1X18 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge
Supply & fix flame proof and weather proof FLP LED flood light fitting 70 watt system complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 Single pole and neutral 8 ways with 200 Amp rated bus bar 240 volts powder coated complete all as specified and directed by Engineer-in-Charge
Supply & fix MCB SPN of 240 Volts 40 Amp capacity, 'C' series, 10 KA in existing DB complete all as specified and directed by Engineer-in-Charge.
Supply & fix MCB SP of 240 Volts 5-40 Amp capacity, 'C' series, 10 KA in existing DB complete all as specified and directed by Engineer-in-Charge.
Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009)complete all as specified and directed by Engineer-in-Charge including testing on completion including the material and labour of the following : - (a) Excavation and earth work for placing electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Mepani Construction Company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .