A R and M O WSS Mandi town tehsil Sadar Distt. Mandi Rejuvation of Bawari at Surani Nallh Bawari W. No. 14 Behna

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work, blasting work, chisenlling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm. layers when required into plinth sides of foundation including consolidation each deposited layer by ramming and watering and then disposing off all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Demolition above G.L. upto floor two level including disposal of unserviciable materials with in 20 metres lead reinforcement cement concrete upto 15cm. Thickness.

Stone soling properly hand packeted in all leads and lifts and as per entire satisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1 cement :3 sand :6 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in :- Foundation and plinth.

Square rubble masonry coursed with hard stone of approve quality in foundation and plinth including racking out joints in cement mortar 1:6 (1 cement: 6 sand)

Providing form work with steel plats 3:15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batterns and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- (A) Flat surfaces such as soffits of suspenpded floors, roofs landing and the like: floors etc. up to 200 mm in thickness.

(B) Vertical surface such as walls (any thichness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like.

( C )Beams contilevers girders lintels.

(D) Edges if slabs.

Providing & Laying cement concrete work 1:2:4 (1 cement 2 sand 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- (A) Suspended floors roofs ladings and shelves and their support. Balconies beams girders bressumers and cantilevers upto floor two level.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in positions complete upto floor two level. Tor Steel.

Cleaning of Bawri including removing/scrapping of all types of dirts complete in all respect and asper satisfaction of Engineer-in-charge.

Providing and fixing Khapral of size 200x100 mm size. Including all leads and lifts. (M.R)

Half bricks masonry in common burnt clay building bricks inc ement mortar 1:4 (1cement :4 sand).

6 mm cement plaster to ceiling in CM 1:3 (1 Cement : 3 Sand)

20 mm cement plaster in single coat on rough side of brick/concrete stone walls for inerior plasatering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand)

Wall painting (tw coats) with plastic emulsion paint fo approved brand and manufacture on undercorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty a required for making the surface.

Steel work welded in buily up section, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, laders, railing, brackets, and similar work in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steek sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNF) organic coating 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 micronsprimer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dua metre with prepainted limpet and rubber washers complete with accesoriees as required as oer the direction of Engineer-in-charge.

Painting two coats (excluding priming coat) on prviously painted steel and other metal surfaces, with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand paperinh and stopping with enamel paint other than white.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregated 40mm nominal size) wiyt 15% pum and curing complete excluding cost of form work in retaining walls/ breast walls, the size of plums shall usally be 150 mm. to 300 mm. as per H.P.P.W.D specifications.