Providing overhead electric line and street light for unit hospital road from Trg ground at 03 Bn BSF under SHQ BSF Bhuj

Amount

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finishedpaint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Providing and making steel/ RCC pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and Erection of ACSR weasel conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required

Supplying and Erection of RCC/ PCC pole of 8 mtr length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.

Supplying, Installation, testing & Commissioning of 40 Watt rating LED street light luminaire, out door type with pressure die cast aluminium housing with heat resistant glass, IP65 protection, suitable for single phase, 50 Hz AC (MAKE Crompton model- LSTP-25-CDL), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, earthing

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV/LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3½ X 70 sq. mm size in the existing masonry open duct /on air (clamped with 1mm thick saddle) as required. (Make Hevalls /Polycab/ Finolex /CCI /Universal /RR Kable)

Providing and fixing 63 A TP&N capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.