Strengthening of Sheetla (Shatoli) Water Supply Scheme in Ramgarh, Nainital

Amount

Random Rubble Stone Masonary laid in 1:6 cement and sand mortar, in brest walls, retaining walls, parapets, scuppers, etc including supply of all materials, royalyilrs, labour T&P etc.

For R / Wall

Providing of all materials,Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes(including supply of all jointing materials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.

G.I. pipe as per IS: 1239 Part-I

Excavation of pipe line trench in following strata lift upto 1.5m lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m from trenches including supply of labour, T&P etc complete. Assuming that 90% pipe line is laid in trenches, it is estimated that 75% excavation will be in soil mixed with shingle, bajri & boulders and 15% will be in ordinary rock.

Soil mixed with shingle Boulders

Medium Rock

Supply and fixing of valves in pipe line including cuting, threading of pipeline with fittings, materials, labours, T&P etc complete.

Wheel Valve (Class-I) as per IS 778/1997

C.I Air Valves Conforming to IS 789

15 mm dia

Supply of all materials, labours, T&P. etc.and construct Gate / wheel valve chamber as per type design complete. 0.9x0.9x1.0m

Supply of all materials, labours, T&P etc and construct of Air Valve & Water meter Chamber as per type design complete.(0.6mx0.6mx0.75m)

Providing and fixing with all materials T&P labour Functional House Hold Tap Connection etc complete.

Supply of all materials, labour T&Petc complete to construct RCC Sump & CWR as per drawing includung all pipes & fittings complete. Capacity of Sump & CWR in KL.

Supply & fixing of chlorinating arrangement of 25 litre capacity over CWR roof slab. Including supply of all materials & labours as per type design & drawing complete.

P/FAMR Compatiable Class-B Water meter as per 779-1994 or ISO 4064-2005,inferential type multijet and etc.

Cartage of Materials

pipes.

Construction of Staff Quarter Building Work

Earth work

Earth work in Excavation for foundation of structure, as per drawing and technical Specification.including setting out, construction of shoring & bracing, removal of stumps & other deleterious matter, and back filling with approved materials.by ordinary soil .

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying (DPC) damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

REINFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work in to plinth level

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Centring and shuttering including strutting, ropping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels,beams,plinth,beams,girders,bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platform.

Brick Work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand )

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand )

Steel work

Ptoviding and fixing T iron frames for door window and ventilators of mild steel tee section joint mitred and welded including fixing of necessary butt hings and screw and applying a primary coat of approved steel primer.

WOOD WORK

Providing and fixing panelled or panelled and glazed shutter for door windows and clerestory windows fixing with butt hinges of required size with necessary screws. all complete as per direction of Engineer-in-charge.

second class Teak wood 30 mm thick shutter

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

Providing and fixing fly proof galvanised M.S wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading.

Provinding and fixing of MS Handless,screw, nut bolt,and door occupant, kundi etc.

Supply of all materials and construct 150 mm SC drain along the appron including supply of all labour T&P etc. complete (as per UJS skelton)

Finishing

12mm thick plaster including necessary centering and shuttering and including supply of all material labour T&P etc all complection of work. 1:6 (1 cement: 6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water tinnable priming coat with cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand and manufacture

R.R 1:6 for protection work for pump house. Including supply of all materials, labour, T&P etc. complete work.

SANITARY AND DRAINAGE WORKS

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, conforming to IS : 7231, with all fittings and fixtures complete, cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with out drain board 470x420 mm bowl depth 178 mm

Providing and fixing soil , waste and vent pipes: S.C.I S&S pipe as per IS:1729

100 mm dia.

75 mm dia

Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc:

100 mm dia.

75 mm dia.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

100 mm dia.

75 mm dia.

Providing and fixing 100 mm sand cast iron S&S plain bend of required degree.

100 mm dia.

75 mm dia.

Providing and fixing 100 mm sand cast iron S&S heel rest sanitry bend of required degree.

100 mm SCI S&S heel rest sanitary bend

75 mm dia

Providing and fixing single equal plain junction of required degree with access door insertion rubber washer 3 mm thick bolts and nuts complete.

Providing and fixing 100 mm sand cast iron s&s terminal guard

Providing and fixing 100 mm sand cast iron S&S collar S.C.I S&S pipe as per IS:1729

Providing and fixing 100 mm M.S stays and clamps for sand cast iron /centrifugally cast (squn) iron pipes of diameter:

100 mm dia.

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm,effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal,weighing not less than 260 gms

DRAINAGE

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture

100 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size) all round S.W pipe including bed concrete as per standard design: 100 mm diameter S. W. pipe (DSR Rate in 15 % add)

Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.

With F.P.S Brick class designation 75

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

With F.P.S. bricks with class designation 75

Extra depth for manholes size 90x80 cm

With F.P.S brick class designation 75

SEPTIC TANK AND SOAK PIT

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions

Providing and fixing plain bend of required degree.

Inlet & Outlet Pipe 100 mm dia

ELECTRIFICATION WORKS

SUB HEAD - I SCHEDULED ITEMS

WIRING

WGSTLPT Point wiring in PVC conduit, with piano type switch.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Moduler switch and socket

Supplying and fixing GI box with moduler plate and cover in front on surface in recess, including providing and fixing on 3 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

BRHOD S/F brass holder:

Supplying and fixing brass batten/ angle holder including connection etc. as required.

BOARD & DB'S

MCBC S/F 'C' curve, SP MCB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

SUPPLY and Fixing of Street light, 500 W 250 Volt,50 HZ, complete with all asseries as per direction of Engineer in Charge.

SUPPLY OF LED Glass Bulb B22, 12 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.

LED bulb 12 Watt

Street light Bulb with all asseries 500 Watt

Water Work

G.I.PIPE

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing brass ball valbe for approved quality high or low presser.

15 mm nominal bore

20 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Terrace Tank