Providing 150mm Dia Pipeline from P & T Colony ELSR Pumping line to Gurunanak Colony Road at 11th Division of VMC. Rc.E4-101172/2026. (MP LADS Funds)

Earth work in excavated for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and brcking, removal of stumps and other deleterious material and disposal upto a lead of 50mts dressing of sides and bottem and backfilling intrenchs with excavated suitable material as per technical specification 305 MORD/304 MORTH

Engaging of Air Compressor 7Cm on hire basis including cost and conveyance of all materials and labour charges wages of driver and helper and fuel charges ctc.complete

Cutting of C.C. surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Cutting open B.T. road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam

Supply and delivery of Quarry Dust filling from approved source including cost, seignorge charges and conveyance of all materials including all labour charges for filling, sectioning, watering and ramming etc., complete as per S.S

Bailing out of water from Pipe line trenches with oil driven pump sets, including hire charges, fuel charges for driver & helper etc complete Pipeline trench

Bailing out of water from Pipe line trenches with oil driven pump sets, including hire charges, fuel charges for driver & helper etc complete Interconnection

Centrifugally cast (SPUN) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding taxes and duties.

Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding all taxes.

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)

Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide ,two coats of anty corrosie paint including cost of material, cutting ,welding, bending, and fabrication charges, including transportaion, loading, unloading,at work spot.as directed by the Dept. Engineer-in- chrge CED and other taxes, etc complete

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange).

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces

Construction of Masonary Sluice Valve pits suitable to the sluice valves of size from 200mm, 300mm and 350mm as per TD No. 4/1941.

Masonary Pit Valve

Masonary Pit Valve

Manufacture, Supply and Delivery of DI Bends and Fittings (spls.) Conforming to IS. No. MAT-07961 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.

Providing laying spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadam specification 5th Rivision as per table 400-13 including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to acheive the desired density etc. as directed by the Engineer-in-Charge and as per MORT & H specification 406( 5th rivision) for finished item of work

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 40mm,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Engaging labour and fitters for interconnection

For interconnection

For interconnection