Periodic Maintenance of road Takipur to Dhamer under AMP-2026-27 in Distt. Kangra

Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a one layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 40 mm(forty millimetre) as per Technical Specification Clause 505.in all respect and as per the direction of Engineer- in -Charge including all leads, Lifts and other incidentials The rate is including octroi, royality, Malkhana, toll tax, or other taxes imposed by the Government time to time.(Rate excluding GST.)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm as per MORD technical specifications section 505 including carriage of material within all leads,lifts as per the entire satisfaction and direction of Engineer- in -Charge including all leads, Lifts and other incidentials The rate is including octroi, royality, Malkhana, toll tax, or other taxes imposed by the Government time to time.(Rate excluding GST.)

Providing and laying 30mm(Thirty millimetre) thick bituminous concrete with 100-120(One hundred to One hundred twenty) TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregate of specified grading, premixed with bituminous binder VG-10(Viscosity grade-Ten@ 5.4% to 5.6%(Five point four to five point six) percent by weight of total mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the the required grade level and alignment,rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORTH specification clause 509, as per the direction and entire satisfaction of Engineer- in -Charge including all leads, Lifts and other incidentials The rate is including octroi, royality, Malkhana, toll tax, or other taxes imposed by the Government time to time.(Rate excluding GST.)

Providing and laying of hot applied thermoplastic compound 2.5 mm(Two point five millimetre)thick including reflectorising glass beads @ 250(Two hundred fifty) gms per sqm area, thickness of 2.5 mm(Two poin five millimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. as per the direction and entire satisfaction of Engineer- in -Charge including all leads, Lifts and other incidentials The rate is including octroi, royality, Malkhana, toll tax, or other taxes imposed by the Government time to time.(Rate excluding GST.)