Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹15.9 Cr
EMD Value
₹31.8 L
Closing Date
4 Dec 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
NORTH
16 conditions · 3 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Any civil engineering work (Excluding track works/zonal works)
Defination of Similar Work :- C-2: Any Civil Engineering Works (excluding Track works/Zonal works).
17 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division)before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (Minus Fifteen Percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
Guntur Division: Construction of New Control office Building at DRM/GNT office premises.
07-DRM-W-GNT-Tid-19~SCOR
07-DRM-W-GNT-Tid-19
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹31.8 L
11 Nov 2026
11 Nov 2026
20 Nov 2026
173 items across 4 schedules · ₹5,95,13,523.23 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 5 km upto 10 km per km | cum- km | 6292.4 | 23.16 | 1,45,731.98 |
| 2 | Beyond 10 km upto 20 km per km | cum- km | 12584.8 | 18.85 | 2,37,223.48 |
| 3 | Beyond 20 km per addl. km | cum- km | 37754.4 | 15.17 | 5,72,734.25 |
| 4 | All kinds of soil | cum | 1573.1 | 177.5 | 2,79,225.25 |
| 5 | Hard rock (blasting prohibited) | cum | 314.62 | 1,432.95 | 4,50,834.73 |
| 6 | All kinds of soil. | cum | 100 | 260.3 | 26,030 |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 1258.48 | 196 | 2,46,662.08 |
| 8 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 2800 | 17.6 | 49,280 |
| 9 | Beyond 30 cm girth upto and including 60 cm girth | Each | 2 | 532.35 | 1,064.7 |
| 10 | Beyond 60 cm girth upto and including 120 cm girth | Each | 5 | 2,373.5 | 11,867.5 |
| 11 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 27 | 7,878.5 | 2,12,719.5 |
| 12 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 154 | 7,178.75 | 11,05,527.5 |
| 13 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 350 | 6,812 | 23,84,200 |
| 14 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 7910 | 410.85 | 32,49,823.5 |
| 15 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 2056.6 | 18.15 | 37,327.29 |
| 16 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 100 | 8,583.4 | 8,58,340 |
| 17 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1000 | 392.15 | 3,92,150 |
| 18 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 2675 | 927.25 | 24,80,393.75 |
| 19 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 2989.02 | 736.4 | 22,01,114.33 |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1420.2 | 961.3 | 13,65,238.26 |
| 21 | Stairs, (excluding landings) except spiral- staircases | Sqm | 53.13 | 764.95 | 40,641.79 |
| 22 | Under 20 cm wide | Metre | 141 | 208.55 | 29,405.55 |
| 23 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 40 | 951.1 | 38,044 |
| 24 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 6 | 14,325.95 | 85,955.7 |
| 25 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 50 | 20,355.8 | 10,17,790 |
| 26 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 397 | 9,655.7 | 38,33,312.9 |
| 27 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1400 | 10,011.35 | 1,40,15,890 |
| 28 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 210 | 733.5 | 1,54,035 |
| 29 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 500 | 905.05 | 4,52,525 |
| 30 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 1718.88 | 8,962.35 | 1,54,05,204.17 |
| 31 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) | Sqm | 1243.2 | 1,105.8 | 13,74,730.56 |
| 32 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 530 | 8,198.55 | 43,45,231.5 |
| 33 | Granite stone of any colour and shade | Sqm | 250 | 3,094.55 | 7,73,637.5 |
| 34 | Area of slab over 0.50 sqm | Sqm | 276 | 5,136.3 | 14,17,618.8 |
| 35 | Granite work | Metre | 230 | 510.95 | 1,17,518.5 |
| 36 | Each | 100 | 978.7 | 97,870 | |
| 37 | Granite Stone of approved shade | Sqm | 50 | 4,051.85 | 2,02,592.5 |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 320 | 1,267.95 | 4,05,744 |
| 39 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 1200 | 5,015.05 | 60,18,060 |
| 40 | Second class teak wood | cum | 19.62 | 1,42,949.7 | 28,04,673.11 |
| 41 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 172.08 | 2,241.8 | 3,85,768.94 |
| 42 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 96 | 3,473.85 | 3,33,489.6 |
| 43 | 125x85x5.5 mm (heavy type) | Each | 20 | 268.65 | 5,373 |
| 44 | 150x10 mm | Each | 40 | 287.25 | 11,490 |
| 45 | 300x16x5 mm | Each | 20 | 322.2 | 6,444 |
| 46 | 125 mm | Each | 40 | 256.65 | 10,266 |
| 47 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. | Each | 100 | 151.05 | 15,105 |
| 48 | 100 mm | Each | 100 | 206.25 | 20,625 |
| 49 | 30 mm thick pre laminated PVC door shutters | Sqm | 250 | 3,663.8 | 9,15,950 |
| 50 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm ( +/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 16 | 573.45 | 9,175.2 |
| 51 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 187.2 | 10,993.55 | 20,57,992.56 |
| 52 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 500 | 2,829.25 | 14,14,625 |
| 53 | 200 mm | Each | 200 | 186.65 | 37,330 |
| 54 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in- charge. | Each | 300 | 272 | 81,600 |
| 55 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 200 | 885.1 | 1,77,020 |
| 56 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer- in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 50 | 533.25 | 26,662.5 |
| 57 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 42 | 226 | 9,492 |
| 58 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 640 | 614.2 | 3,93,088 |
| 59 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 33.35 | 1,096.55 | 36,569.94 |
| 60 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 500 | 1,112.7 | 5,56,350 |
| 61 | Size of Tile 800 x 1600 mm | Sqm | 3360 | 1,870.25 | 62,84,040 |
| 62 | Size of Tile 600 x 600 mm | Sqm | 265.12 | 1,464.85 | 3,88,361.03 |
| 63 | Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and confirming to IS:15622, of approved make , brand and manufacturer , laid on 20 mm thick base cement mortar 1:4 (1 cement 4 coarse sand ) jointing with grey cement slurry @3.30 kg/sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with zero chipping diamond cutter only . Laying of slab will be done with the help of notch trowel , wedge , clips of required thickness , vacuum cups for lifting , leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800 x2400 mm of all colors and shades | Sqm | 1120 | 3,623.95 | 40,58,824 |
| 64 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 1400 | 4,481.3 | 62,73,820 |
| 65 | 75 mm diameter | Metre | 500 | 248.8 | 1,24,400 |
| 66 | 110 mm diameter | Metre | 120 | 377.4 | 45,288 |
| 67 | 110 mm bend | Each | 55 | 150.35 | 8,269.25 |
| 68 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 5600 | 1,355.8 | 75,92,480 |
| 69 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1575 | 738.65 | 11,63,373.75 |
| 70 | 1:4 (1 cement: 4 fine sand) | Sqm | 10260.8 | 347.05 | 35,61,010.64 |
| 71 | 1:6 (1 cement: 6 fine sand) | Sqm | 1000 | 383 | 3,83,000 |
| 72 | 1:4 (1 cement: 4 fine sand) | Sqm | 10260.8 | 471.35 | 48,36,428.08 |
| 73 | Two or more coats on new work | Sqm | 9985.6 | 155.9 | 15,56,755.04 |
| 74 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 9985.6 | 156.05 | 15,58,252.88 |
| 75 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 24 | 271.45 | 6,514.8 |
| 76 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 60 | 3,551.25 | 2,13,075 |
| 77 | In cement mortar | cum | 18 | 2,060.2 | 37,083.6 |
| 78 | For thickness of tiles 10 mm to 25 mm | Sqm | 100 | 73.4 | 7,340 |
| 79 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 100 | 266.45 | 26,645 |
| 80 | Overhead informatory road signage | Sqm | 100 | 5,879.9 | 5,87,990 |
| 81 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 500 | 972 | 4,86,000 |
| 82 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 15 | 6,515.55 | 97,733.25 |
| 83 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 100 | 2,226.35 | 2,22,635 |
| 84 | 510x1040 mm bowl depth 250 mm | Each | 10 | 6,945.6 | 69,456 |
| 85 | 32 mm dia | Each | 15 | 119.55 | 1,793.25 |
| 86 | 40 mm dia | Each | 20 | 119.55 | 2,391 |
| 87 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 15 | 1,607.95 | 24,119.25 |
| 88 | Sand cast iron S&S as per IS: 3989 | Each | 30 | 1,996.5 | 59,895 |
| 89 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 30 | 708.95 | 21,268.5 |
| 90 | 25 mm nominal dia Pipes | Metre | 500 | 401.55 | 2,00,775 |
| 91 | 32 mm nominal dia Pipes | Metre | 500 | 518.75 | 2,59,375 |
| 92 | 50 mm nominal dia Pipes | Metre | 500 | 934.15 | 4,67,075 |
| 93 | 20 mm nominal dia Pipes | Metre | 500 | 537.6 | 2,68,800 |
| 94 | 25 mm nominal dia Pipes | Metre | 500 | 627.25 | 3,13,625 |
| 95 | 50 mm dia nominal bore | Metre | 1000 | 762.15 | 7,62,150 |
| 96 | 50 to 80 mm nominal bore | Each | 50 | 1,785.35 | 89,267.5 |
| 97 | 25 mm nominal bore | Each | 6 | 622.4 | 3,734.4 |
| 98 | 32 mm nominal bore. | Each | 6 | 689.6 | 4,137.6 |
| 99 | 50 mm nominal bore | Each | 6 | 1,026.65 | 6,159.9 |
| 100 | 25 mm nominal bore | Each | 6 | 464.05 | 2,784.3 |
| 101 | Horizontal | Each | 6 | 591.4 | 3,548.4 |
| 102 | Vertical | Each | 6 | 624.1 | 3,744.6 |
| 103 | Horizontal | Each | 6 | 791.9 | 4,751.4 |
| 104 | Vertical | Each | 6 | 850.25 | 5,101.5 |
| 105 | Horizontal | Each | 6 | 1,371.2 | 8,227.2 |
| 106 | Vertical | Each | 6 | 1,445.15 | 8,670.9 |
| 107 | 15 mm nominal bore | Each | 10 | 97.75 | 977.5 |
| 108 | 150 mm diameter | Each | 12 | 222.35 | 2,668.2 |
| 109 | 15mm nominal bore | Each | 20 | 574.3 | 11,486 |
| 110 | 80 mm dia nominal bore | Each | 12 | 3,627.65 | 43,531.8 |
| 111 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 18 | 111.45 | 2,006.1 |
| 112 | 100 mm diameter | Metre | 600 | 443.6 | 2,66,160 |
| 113 | 150 mm diameter | Metre | 600 | 695.8 | 4,17,480 |
| 114 | Rectangular shape 600x450 mm internal dimensions | Each | 24 | 1,437.65 | 34,503.6 |
| 115 | Square shape 450 mm internal dimensions | Each | 24 | 1,155.45 | 27,730.8 |
| 116 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg | Each | 50 | 787 | 39,350 |
| 117 | Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | Each | 20 | 2,890.1 | 57,802 |
| 118 | 300 mm dia | Metre | 200 | 707.75 | 1,41,550 |
| 119 | 150 mm nominal size dia | Metre | 200 | 793.25 | 1,58,650 |
| 120 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. | Kg | 2000 | 414.3 | 8,28,600 |
| 121 | Frame size 65 x 100 mm | Metre | 500 | 1,111.3 | 5,55,650 |
| 122 | 18 mm thick | Sqm | 500 | 2,992.9 | 14,96,450 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsofcontroloffice.pdf
ATTACHMENT
earthworkconditions.pdf
ATTACHMENT
onsitelab.pdf
ATTACHMENT
weldingprofile.pdf
ATTACHMENT
SystemImprovementsformaintainingSiteRecords-CE-Works-1.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf
ATTACHMENT
LabTesting.pdf
ATTACHMENT
TestcheckinQualityControl.pdf
ATTACHMENT
16.Steelprepayment_1.pdf
ATTACHMENT
concretedesignmixguidelines-Reg..pdf
ATTACHMENT
Tid-19-MTD-01uptoACS-11dt17.09.26-Original.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to12.pdf
ATTACHMENT
Tid-19-MTD-02uptoACS-12dt17.09.2026-Original-Final_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .