PMAGY

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD. Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Foundation

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings.

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Pedastals

Filling with Sand in trenches, sides of foundations & basement by watering and ramming including all operational, incidental, labour charges, hire charges of T&P etc complete including cost and conveyance of material and labour charges etc complete for finished item of the work (APSS No 309& 310) in basement including contractors profit & Over head charges, but excluding GST & seignorage charges

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST-

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Plinth Beam

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof Beam

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof Slab 125mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work. Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. Roof slab 125mm thick

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Super Structure

Cost and supply of RCC jallies 40 mm thick for ventilators including cost and conveyance of all materials and labour charges etc., complete for finished item of work including contractors profit & Over head charges, but excluding GST & seignorage charges

Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.

Ornamental Plastering with CM (1:4) 8mm thick including cost and conveyane of all materials and labour charges etc., complete.Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Ceiling

Plastering with CM(1:5) 12mm thick including cost and conveyance of all materials all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901, 903 & 904) including overhead charges and contractor's profit @13.615% but excluding GST.

Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in positition etc., complete. including overhead charges and contractor's profit @13.615% but excluding GST.

Supply and fixing of Flush Door Size 1.20 x 2.10 mts with all specified fixtures as per approved design, including cost and conveyance of all materials and labour charges. including contractors profit & Over head charges, but excluding GST & seignorage charges

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Red oxide with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors

Painting to New wood work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors including contractors profit & Over head charges, but excluding GST & seignorage charges

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work(APSS No. 911) including overhead charges and contractor's profit @13.615% but excluding GST in All Floors for Internal Walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work(APSS No. 911) including overhead charges and contractor's profit @13.615% but excluding GST in All Floors for External walls.

Flooring with 100 mm thick CC (1:6:10) mix using 40mm HG metal,100mm thick and 20mm cement concrete surface(Ellies pattern , first sort) per 10Sqm of area including all labour charges etc., complete

Filling,Ramming and watering with Selected Earth for side Berms including all materials and all labour charges etc ,as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH.

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 112/165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time. RATE AS APPROVED BY DISTRICT COLLECTOR 2013-14 in RWS & S Dept. including contractors profit & Over head charges, but excluding GST & seignorage charges

Cost supply of 180mm dia. PVC 6kg per sqmm class III for casing CSSR Sl.no 20 Pg 66 including contractors profit & Over head charges, but excluding GST & seignorage charges

Towards cost supply of 180mm dia. PVC BORE WELL CAP including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and errcting,ISI mark of 1 H.P 10 stages single phase ISI Submerseeeible motor Pumpset suitable for 4" borewell Makes kriloskar/Crompton/CRI/L&T/Texma/Varsha with high quality wear resistance and dynamically balanced bronze imperresKirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha including contractors profit & Over head charges, but excluding GST & seignorage charges

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. including contractors profit & Over head charges, but excluding GST & seignorage charges

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including contractors profit & Over head charges, but excluding GST & seignorage charges

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces etc., complete.for finished item of work in all floors including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and Fixing of 25mm dia 1.8mm thick (Medium type) PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) Concealed in Wall with all required accessoriesincluding masonary work for light, fan and separate plug point with 16 SWG MS deep box including all labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and Fixing of 25mm dia 2.20mm thick heavy type PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) Concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A,1way switch,GI metal box,front plate covewring to switch, Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of Wires : Finolex / R.R.Cable Makes of Switches : Legrand rteor,/Schneider Zen celo/Hobewell Blenge plus. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and fixing of Batten Holder / Slanting Holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7Watt LED Bulb including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. including contractors profit & Over head charges, but excluding GST & seignorage charges Makes: As per list of recommended brands as category I.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and fixing of 18 x 30 peeta boards including cost and conveyance of all materials and all labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and fixing of 32A 240V Porcelain Rewirable Fuse Units for mains including cost and conveyance of all materials and all labour charges etc., complete. including contractors profit & Over head charges, but excluding GST & seignorage charges

Supply and Run of 4 of 16 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains. including contractors profit & Over head charges, but excluding GST & seignorage charges