Construction of urinals and toilets in Dr.NTR commercial shopping complex first floor in 23rd Division under AE-5 Section Circle-II

Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

E) Roof beams FF

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete. FF

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.(BMT-N.06)

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. (Internal) FF

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete (EXTERNAL) FF

Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. FF

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap etc., complete. MAT-01789

Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. LAB-00168

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm BMW-D.05

Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. BMW-D.06

Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal)

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal) (2 Couts Plastared surface)

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (EXTERNAL)

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap etc., complete. MAT-01789

Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. LAB-00168

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm BMW-D.05

Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice. BMW-D.06

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm BMW-D.34

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

MAT-07652 (110mm Dia)

MAT-07650 (75mm Dia)

Urinal push cocks

Nylon connections

Waste couplings

Steel jollies 5"

11/4" PVC E lbows

21/2" nany traps

1" tank nipples

3/4" x 1/2" brass elbows

3/4" plain elbows

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

28.80mm ODPipe - SDR 13.5 BMW-I.222

15.90mm ODPipe - SDR 13.5 BMW-I.220

22.20mm ODPipe - SDR 13.5 BMW-I.221

Supply & Fixing of CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make etc., complete as directed by departmental authorities.(BMW-E.22)

Supply & Fixing of NP soap dish heavy type with NP SCREWS etc., complete as directed by departmental authorities. (BMW-I.28)

Plumbing and drainage charges including all labour charges etc.,complete as directed by the departmental authorities.