EXTENTION OF 11KV LINE OF CHANDIKA FEEDER FOR MAKING RING MAIN UNIT FOR TOWN SECTION UNDER EDSD-1ST BAGESHWAR UNDER CAPITAL (SI) HEAD

Amount

Cartage of SP-33 poles from store centre to construction site with loading, unloading at both points and proper stacking upto 15-200 Km.

Cartage of other material (other than poles) by vehicle for store center to nearest construction site store including loading and unloading at both ends upto 150-200 Km.

Head load cartage of SP-33 poles from road to site upto 0 to 1 Km.

Head load cartage of small material from road to site upto 0 to 1 Km.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for errection of pole in all type of soil including proper dressing of sides and ramming of bottom including gettiong out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of SP-33 Single support Poles in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESSPO construction manuals.

Erection of SP-33 Double support Poles in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESSPO construction manuals.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ration 1:4:8 (1Cement:4graded stone 20mm nominal size:8Coarse Sand) block including cost of cement, sand alignment, levelling as per RESSPO construction manual.

Muffing of poles size 0.45x0.60 cm radious with CC 1:3:6 (1cement:3coarse sand:6graded stone 10mm nominal size) block size 45cm height from ground level including cost of cement, stone and sand etc.

Fabrication of MS Channel angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc as per RESSPO schedule and local approved drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavted soil.

Fixing, tightening and nozzeling of stay with pole and stay rod on required tension as per drawing/RESSPO manual.

Grouting of stay in size 0.6x0.6x0.3 in CC ration 1:4:8 (1cement:4graded stone 2mm nominal size:8 coarse sand) block including cost of cement, sand and stone ballst back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESSPO manual.

Earthing of support with MS Earth rod of 2.5 mtr long by hammaring of MS rod to proper depth and connecting the earth electrode with the help of GI wire as per construction manual.

Laying, Spreading, Stringing and Sagging of 11KV/33KV line in 3 phase (3P4W) of the ACSR Raccoon Wire as phase wire with Weasel as earth wire complete including fixing of all accessories in 3 Nos conductor in parallel with binding and jumphering as per profile and sagging chart.

Painting of poles with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5mtr from ground level.

Route clearance by cuttinng of tree branches for 11KV Line.

Fixing of danger Board

Fixing of barbed wire.

Guarding of Line.

T-off connection complete.

Hari Om Sai Electricals

DEEPAK CONSTRUCTION