Kerala

Active

Works

Civil Works - Buildings

Providing Doors to the shelf rack balance Electrical and Electronic Works at Roads Division Manjeri-Providing Doors to the shelf rack Roads Division office Manjeri- General Civil Work

Public Works Department

Manjeri | Malappuram, Kerala

Amount: ₹3.4 LCloses: 8 Oct 20266d left

Timeline

Published29 Sept 2026
Closes8 Oct 2026
Bid Opening12 Oct 2026

Tender Value

₹3.4 L

EMD Value

₹8,474

Closing Date

8 Oct 2026, 11:00 am6d left

Tender Inviting Organisation

Name

Assist.Exe.Engineer pwd buildings sub divn Manjeri

Address

Assist.Exe.Engineer pwd buildings sub divn Manjer

Work Description

Providing Doors to the shelf rack balance Electrical and Electronic Works at Roads Division Manjeri-Providing Doors to the shelf rack Roads Division office Manjeri- General Civil Work

Tender Information

Tender ID

2026_PWD_874273_1

Reference Number

PWD/BLDG/7606

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

180 days

Location

Manjeri

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredTender fee details (.pdf)

Requiredcontractor licence (.pdf)

Requirede payment details (.pdf)

Requiredform of tender (.pdf)

Requiredintegrity pact (.pdf)

Requiredaffidavit (.pdf)

RequiredGST registration and PAN (.pdf)

RequiredBid documents (SBD) with NIT (.pdf)

RequiredPreliminary agreement (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹750

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹8,474

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

29 Sept 2026

Published

29 Sept 2026

Bid Opening

12 Oct 2026

Download Starts

29 Sept 2026

Download Ends

8 Oct 2026

Submission Starts

29 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1DETAILED ESTIMATE
1.001	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	72	kg	499.86	₹35,989.92
1.002	21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	60	kg	612.58	₹36,754.8
1.003	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	60	sqm	1,111.65	₹66,699
1.004	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	673.4	sqm	104.66	₹70,478.04
1.005	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	111	sqm	99.71	₹11,067.81
1.006	OD140436/2026-2027:Supplying and fixing Stainless steel letters of size 40 cm with necessary fittings, labour charges and using with cuplock scaffolding approx.6 metres height etc. complete as per direction of Engineer - in - charge.	30	no	2,585.88	₹77,576.4
1.007	OD140437/2026-2027:Providing and fixing in wall ling with TKT board 9 mm thick with 2.5x2.5 mm size square tube for frame and supports with channel sections with necessory fixing arrangements. including all charges, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : (Date vide DSOR item 9.35.1 DAR Civil)	42	sqm	818.81	₹34,390.02
1.008	13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	42	sqm	142.67	₹5,992.14

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

viewsbd.pdf

Tender Documents • 1.63 MB

BOQ_1483572.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1DETAILED ESTIMATE
1.001	21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	72	kg	499.86	₹35,989.92
1.002	21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)	60	kg	612.58	₹36,754.8
1.003	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	60	sqm	1,111.65	₹66,699
1.004	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	673.4	sqm	104.66	₹70,478.04
1.005	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	111	sqm	99.71	₹11,067.81
1.006	OD140436/2026-2027:Supplying and fixing Stainless steel letters of size 40 cm with necessary fittings, labour charges and using with cuplock scaffolding approx.6 metres height etc. complete as per direction of Engineer - in - charge.	30	no	2,585.88	₹77,576.4
1.007	OD140437/2026-2027:Providing and fixing in wall ling with TKT board 9 mm thick with 2.5x2.5 mm size square tube for frame and supports with channel sections with necessory fixing arrangements. including all charges, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : (Date vide DSOR item 9.35.1 DAR Civil)	42	sqm	818.81	₹34,390.02
1.008	13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	42	sqm	142.67	₹5,992.14

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1DETAILED ESTIMATE

1.001

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

499.86

₹35,989.92

1.002

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

612.58

₹36,754.8

1.003

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

sqm

1,111.65

₹66,699

1.004

13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

673.4

sqm

104.66

₹70,478.04

1.005

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

111

sqm

99.71

₹11,067.81

1.006

OD140436/2026-2027:Supplying and fixing Stainless steel letters of size 40 cm with necessary fittings, labour charges and using with cuplock scaffolding approx.6 metres height etc. complete as per direction of Engineer - in - charge.

2,585.88

₹77,576.4

1.007

OD140437/2026-2027:Providing and fixing in wall ling with TKT board 9 mm thick with 2.5x2.5 mm size square tube for frame and supports with channel sections with necessory fixing arrangements. including all charges, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : (Date vide DSOR item 9.35.1 DAR Civil)

sqm

818.81

₹34,390.02

1.008

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

sqm

142.67

₹5,992.14