construction of gazebo resting point rain shelter at id point on treeking route kudan towards kelang GP badsar of palampur Forest Range

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand) 6 grade dstone aggregate 20 mm nominal size)

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with Cement Mortar 1:6(1 cement:6 sand) hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand 12 graded stone aggregate 20mm nominal size) at plinth level in

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level: 1:2:4(1 Cement: 2 coarse sand): 4 grade dstone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level:-Mild steel and Medium Tensile steel bars

Providing and laying 10 mm thick natural Slate flooring with 20 mm (average) thick base of cement mortor 1:4 (1 cement: 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.

Providing and fixing Cast iron decorative Pole of size (bottom dia-300mm, Top dia-90mm and Height is 600mm complete all as per drawing andtechnical Specification

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes, including carriage of material upto all leads and lifts and as per direction of Engineer In Charge,

Providing and fixing Cast iron decorative upper ornamental railing of size 300 mm wide welding with SHS 25X25X3mm complete all as per drawing and technical Specification complete with all accessories/welding as required and as directed by Engineer-in-charge and colour & pattern as decided by Authority

Providing and fixing Cast iron decorative upper Corbel Bracket complete all as per drawing and technical Specification complete with all accessories/welding as required and as directed by Engineer-in-charge and colour & pattern as decided by Authority.

roviding and fixing compoute Material Catt son & MS decorative Hand Railing of size 750 mm High from floor The Horizontal member of railing should be of MS material and remaining decorative part of railing should be in Cast iron complete all as per drowing and technical Specification complete with all accessories/welding as required and as directed by Engineer-in-charge and colour & pattern as decided by Authority.

Providing and fixing M.S BP Sheet 1.66mm to 2mm thick in eaves board facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applyingpriime complete as per the instruction of Engineer -in -charge (Base members of steel work shall be measured & paid separately) including carriage of maternal within all leads and lifts and other incidental works as directed by Engineer-In-Charge

Providing and fixing 3-4mm thick shingles sheet rooling of size 99 X36 cm and 18cm overlapping on sheets i/c fixing with self drilling screw complete with all accessories as required and as directed by Engineer-in-charge and colour & pattern. The shingles roofing sheet should confirm to following standards:- 1. Construction 3 piece laminated fibre glass construction. 2. Cast D3081-Asphalt shingles combined with glass flet and surface with mineral granules. 3. CastM E108-Class A Fire resistannce 4. CastM C 3161-For 110 Mph wind resisntace. 5.UL (Under Writer Lab) cedrtification for a the above"

Providing and fixing 3-4mm thick and 30 cm overall width shingles shadow ridges/hips- i/c fixing with self drilling srerew complete with all accessories as required and as directed by Engineer-in-charge and colour & pattern.

Providing and fixing Wood shade ceiling liner sheet for ceiling on Gazebo including cutting, fixing and welding/self screw to steel roof members complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately)

Providing and fixing Mohti on Top 8 inch fixing with steel member on top of Gazebo complete all as per drawing and technical Specification complete with all ccessories/welding as required and as directed by Engineer-in-charge

Providing and fixing Cast iron decorative Zahalar of size 250mm wide on face of facia sheet of complete all as per drawing and technical Specification complete with all accessories/welding as required and as directed by Engineer-in-charge and colour & pattern as decided by Authority

Providing and laying GPL/Power Water proofing compound before laying shinles sheef over MS BP sheet. Two or more coat applied @ 1 ltr/10 sqm over an under coat of primer of approved brand and manufacture

Painting Steel work with Enamel Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer of approved brand and manufacture