UR to Four court complex at Machilipatnam

Brick masonry in CM (1:6) using 2nd class bricks having crush strength of not less than 35 kg/ sq.cm including cost, seigniorage and conveyance of all materials and water from approved sources to work site and all operational , incidental, labour charges such as scaffolding, mixing mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504 for Superstructure

Ornamental Plastering 12 mm thick in single coat with C.M (1:3) proportion with dubara sponge finish including cost and conveyance of all materials and water from approved sources to work site and all operational, Incidental, labour charges such as mixing mortar, curing etc., complete for finished finished item of work for patches to ceilings

Plastering 20 mm thick in single coat with C.M (1:4) proportion with dubara sponge finish including cost and conveyance of all materials and water from approved sources to work site and all operational, Incidental, labour charges such as mixing mortar, curing etc., complete for finished finished item of work

PCC (1:2:4) using 12 mm graded HBG metal as per SS108 , machine mixed laid in position in layers not exceeding 15 cm in thickness ,including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as machine mixing concrete,laying, tamping,curing etc., complete for finished item of work as perSS402

Flooring with CM(1:3), 20mm thick including cost and conveyance of all materials to site and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and curing, etc,, complete for finished item of work

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work in Ground Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for:-Internal Colouring - Providing Putty to Internal walls

PCC (1:4:8) using 40 mm nominal size SS5 gauge HBG metal as per SS108 , machine mixed laid in position in layers not exceeding 15 cm in thickness ,including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as machine mixing concrete,laying, tamping,curing etc., complete for finished item of work as perSS402

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension .

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum.It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame 1 sqm 3030 (BMT-N.88)

Supplying and fixing of fully panelled Door of size 1.52x2.10 m in two leaves with medium teak wood frame of size 100x75mm, Medium teak wood Styles & rails of 38mm thick shutters with 25mm thick teak wood planks including cost and coveyance of all materials such as Hinges, fixtures, Hold fasts etc. and all labour charges for fixing the door and fixtures in postion etc. complete as directed by the Engineer-in-Charges.

Supplying and fixing of Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick conforming to IS:2202 to the existing door frames including cost and coveyance of all materials such as Hinges, fixtures etc. and all labour charges for fixing the shutter and fixtures in postion etc. complete as directed by the Engineer-in-Charges.

Painting to new walls in two coats with acrilic emulsion paint interior grade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to old walls in two coats with acrylic emulsion paint exterior grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting with synthetic enamel paint in two coats to iron work with approved brand and shade including cost and conveyance of all materials and cost of brushes and all labour charges painting etc., complete.

Painting to new wood work and flush shutters with lumppum finish in 2 coats of ready mixed first quality synthetic enamel paint of approved brand and shade over one coat of wood primar for new wood work including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212