Himachal

Active

Works

Civil Works

Repair and Maintenance of HPPWD Rest House Anni

Public Works Department

Nirmand | Kullu, Himachal Pradesh

Amount: ₹3.0 LCloses: 22 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes22 Oct 2026
Bid Opening22 Oct 2026

Tender Value

₹3.0 L

EMD Value

₹6,500

Closing Date

22 Oct 2026, 9:00 am4d left

Tender Inviting Organisation

Name

EE Nirmand

Address

Executive Engineer Outer Seraj Division HP PWD Nirmand

Work Description

Repair and Maintenance of HPPWD Rest House Anni

Tender Information

Tender ID

2026_PWD_145737_38

Reference Number

No.PW.OSDN.Tender NIT 2025- 8609-14 dated 08.10.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Nirmand

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredCost of tender form under general rule 24.1 (.pdf)

RequiredEarnest money under general rule 24.2 (.pdf)

RequiredContractor registration under general rule 24.3 (.pdf)

RequiredWork done certificate and work in hand under general rule 24.5 (.pdf)

RequiredList of machinery under general rule 24.6 (.pdf)

RequiredPermanent Account number (.pdf)

RequiredRegistration under Employees provident fund and miscellaneous provision act 1952 (.pdf)

RequiredFrom 8 duly signed by contractor (.pdf)

RequiredMore then two work in shape of affidavit and all documents true and correct in shape affidavit (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,500

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

14 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (18 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and fixing 0.62mm (Zero point six two milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer	50.1	Per Square meter	1,200	₹60,120
2	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.	751.5	Kg	95	₹71,392.5
3	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.	47.6	Per Square meter	270	₹12,852
4	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	47.6	Per Square meter	60	₹2,856
5	Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. : New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.	47.6	Per Square meter	112	₹5,331.2
6	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)	200.07	Per Square meter	100	₹20,007
7	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete.	1	Each	1,165	₹1,165
8	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete	2	Each	1,160	₹2,320
9	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.	2	Each	350	₹700
10	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.	3	Each	680	₹2,040

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.68 MB

Work Item Documents

BOQ_217149.xls

BOQ • 0.76 MB

SBDNo41.pdf

Tender Documents • 3.36 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and fixing 0.62mm (Zero point six two milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer

50.1

Per Square meter

1,200

₹60,120

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

751.5

₹71,392.5

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

47.6

Per Square meter

270

₹12,852

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

47.6

Per Square meter

₹2,856

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. : New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

47.6

Per Square meter

112

₹5,331.2

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

200.07

Per Square meter

100

₹20,007

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete.

Each

1,165

₹1,165

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Each

1,160

₹2,320

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Each

350

₹700

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Each

680

₹2,040