REPAIR TO CERTAIN FLOORING, SANITARY FITTINGS, JOINERY, FENCING, DRAIN AND CERTAIN ALLIED ITEMS AT SHIYOT UNDER GE (A) BHUJ

Amount

Taking down chowkats or frames n.exc 1.5 Sqm each (w/o taking off shutters from the frames ) all as specified and directed.

All as per item No 1 here-in-before but exc 1.5 Sqm but n.exc 4 sqm each

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm and removing to store all as specified and directed.

All as per Srl item No 3 here-in-before but area exc 2 sqm and removing to store.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and Supply and fixing Coloured Glazed Ceramic tiles of size 300 m x 200 mm and 7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below of above GL) and removing out side MD land all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (reinforced) all as specified and directed.

Taking down cement plaster of any description on brick or stone wall incl raking out joints, hacking for key, scurbing down with water etc and Material and labour for rendering 20 mm thick on stone/concrete masonry surface in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore incl cleaning for refixing or removal at store and Supply & fixing 15mm dia UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed. Make : FINOLEX/SUPREME/KISAN/PRINCE

Taking up or down steel tubing and connections, 20 mm bore incl cleaning for refixing or removal at store and Supply & fixing 20mm dia UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed . Make : FINOLEX/SUPREME/KISAN/PRINCE

Supply and fixing framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balausters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) etc and disposing rubbish off the premises of cantonment and Supply and fixing non skid ceramic joint free coloured tiles 7 mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tile over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Supply and fixing factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers all as specified and directed.

Supply and fixing 35 mm thick IIst class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats all as specified and directed.

Supply and fixing in repair GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Supply and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification & drawing

Supply and fixing Factory made solid moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing butt Hinges, medium weight, stainless steel, 100 mm size complete all as specified.

Supply and fixing Aluminium anodised butt hinges 75 mm dia extruded aluminium alloy with galvanised mild steel hinge pin anodised and type C-22 complete all as specified and as directed.

Supply and fixing 250 mm size mild steel sliding door bolts plate type, stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts (four on bolt plate and two on staple plate all as specified and directed.

Supply and fixing extruded alum alloy handles size 150 mm fabricated type anodised all as specified and directed.

Supply and fixing Aluminium anodized barrel tower bolts 150 mm long all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden frames glazed with putty/beads and Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed.

Material and labour for Mild steel TMT bars 5 mm dia and over up to 10 mm as in stirrups, cut to length, bent to shape required including crancking bending spirally for hoping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and labour for formwork to faces of walls , retailing wall , abutments parapits, and staircase railing and similar work including attached pillasters buttress ect vertical to batter for fair finished surfaces all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm graded aggregate in slab supported on walls, beams chajjas roof projections, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified and directed.

Material and labour for RCC M-25 Grade Design mix (using 20 mm graded chrushed stone aggregates) as in raft foundation, including rafts, footings, foundation beams, plinth beams, bases of columns and mass concrete complete all as specified and directed.

Material and labour for RCC M-25 Grade Design mix (using 20 mm graded chrushed stone aggregates) as in columns, pillars, Piers and Struts etc complete all as specified and directed.

Use and waste of Form work to sides of concrete footings bases of colums raft and raft beams side and soffits of foundations and plinth beams and similar work finished fair and even complete all as specified and directed.

Use and waste of Formwork to sides of fair finished surfaces pillars, posts, struts, piers, columns and stanchions all as specified and directed.

Material and labour for rendering 10 mm thick for cocrete surfaces in CM 1: 6 complete all as specified and directed finished surface to be even and smooth w/o using extra cement..

Material and labour for PCC 1:2:4 type B1 40 mm thick using 20 mm graded aggregate as in flooring finishing concrete to even and smooth w/o using extra cement complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Supply and fixing in repairs 15 mm dia Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete as directed

Supply and fixing in replacement Rotational moulded poly-ethylene multilayered water storage tanks (cylinderical vertical with closed top) 500 litres capacity white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed including Dismantling old existing water tanks and removing to store

Supply and fixing in replacement Rotational moulded poly-ethylene multilayered water storage tanks (cylinderical vertical with closed top) 1000 litres capacity white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed including Dismantling old existing water tanks and removing to store

Supply and fixing in repairs Gratings of 100 mm dia all as specified and directed.

Supply and fixing in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

Supply and fixing IN repairs tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified and directed.

Supply and fixing in repair bib taps 15mm bore chromium plated, fancy type, cast copper alloy with crutch butterfly handle screw down, screwed for iron pipe or for brass all as specified and directed.

Supply and fixing n repairs 15mm bore Pillar taps fancy type cast copper alloy with chromium plated screwed down or high pressure with or w/o lettered hot or cold with long screwed shank and fly nuts for iron pipe all as specified and directed.

Supply and fixing in repar Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type, chromium plated, screwed both ends for iron pipes or for union, for 15 mm bore complete all as specified and directed.

Supply and fixing in repar Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type, chromium plated, with long shank and cup, (concealed type) screwed both ends for iron pipes or for union, for 15 mm bore complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and directed

Material and labour for preparation of new plastered surface of ceilings and applying two coats of oil bound distemper over a coat of primer after preparation of surfaces complete all as specified and directed.

Material and labour for preparation of old decorated surface of ceiling and applying two coats of white wash complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface incl preparation complete all as specified and directed.

Material and labour for preparation of new of previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Material and labour for preparation of new or previously untreated steel surfaces of any description n. exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in repairs Non absestoes fibre cement building boards 4 mm thick fixed or laid inserted to GI/Aluminiujm frame work with screws complete all as specifed and directed incl taking down unservicable ceiling boards of any descripton and removing to store complete all as specifed.

Material and labour for galvenised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed.

Supply and fixing in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified directed.

Supply and fixing in repair plastic water closet seat cover, black / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified directed..

Supply and fixing brass chromium plated nozle jet suitable for EWC complete all as specified directed.

Welding in repairs n.exc 2.50 cm in length thickness of metal welded n.exc 6 mm thick omplete all as specified directed.

Demolition of brick work or stone / boulder masonary built in cement mortar including all quoins, arhes, pillars etc but excluding asahlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Material and labour for Brick masonary with sub class B bricks strainght or curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and as directed

Material and labour for rendering 15 mm thick of CM 1:6 on fair face of brick work or concrete surface finished even and smooth without using extra cement all as specified and directed.

Material and labour for rendering 15 mm thick of CM 1:4, on fair face of brick work or concrete surface finished even and smooth without using extra cement all as specified and directed.

Dismantlling of corrugated steel sheeting of any gauge and of any description and in any position as in roof coverings and Supply and fixing prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550mpa as in roof coverings / cladding to wall and fixed with L or J hooks complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide incl preparation of new surfaces over 10 cm width or girth in camaflauge pattern complete all as specified.

Material and labour for applying one coat of synthetic enamel paint including preparation of new surfaces over 10 cm width or girth complete all as specified.

Supply and fixing in repairs PVC ball valve with operating handle (stop valve) of size 3/4" (20mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes all as specified and directed Make : Prince/Finolex/Supreme/Kisan

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) etc and disposing rubbish off the premises of cantonment and Supply and fixing vitrified coloured tiles 10 mm thick (Square or rectangular) size of 600mm x 600mm as in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tile over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Dismantiling of tiles of any discription or any thickness in floors, aprons etc. laid bedded and pointed in any mortar and disposing off rubbish off the premises of cantonment and Supply and fixing prepolished chequered cement concrete tiles 300 mm x 300 mm of thickness 20 to 25 mm set, jointed and pointed in cement slurry in floors with grey cement and pigments over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface broken stone or boulders etc complete all as specified and as directed.

Opening of manhole covers, taking out sludge from septic tanks, inspection chambers, manholes mechanically (Hydraulic sewer cleaning vehicle by pumping, depth of tank not exc 1.5m, burying in nearby area to a distance of 1.00 Km including necessary excavation complete all as specified and as directed.

All as per Srl item No 68 here-in-before but depth of tank exc 1.5m and not exc 3.0m. Note:- for item No 68 & 69:- The payment shall be be made on the basis of actual area (internal) of the septic tank/manhole/soakage pit/ soakage well multiplied by depth of the sludge accumulated. The unit rate for desludging shall interalia deemed to include the cost of dewatering and shall not be measured and paid for separately.

Clearing of blockage in Water Closets including P or S traps, floor/gully traps upto and including 1st manhole, manually with necessary T&P as per the site requirement complete all as specified. Note:- Cost of cleaning of 1st manhole shall be deemed to be inclusive in the unit rate quoted by the tenderer.

Cleaning carefully by rodding manually or mechanically from inspection chamber to septic tank or manhole to manhole the existing 100mm bore sewer lines all as specified and as directed by the Engr-in-Charge.

All as per description of Srl item No 71 here-in-before but dia of pipe 150mm

Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 500D/550D cut to length , bent to shape required including cranking , bending and binding with mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified.

Supply and fixing in repair Vitreous china wash down water closet (pedestal pattern) white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line complete all as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-I smooth finish and reforming benching as required for 150 mm internal dia of pipe, complete all as specified.

Supply and fixing in repairs reinforced concrete pipes class NP3 complete with collars 150 mm dia pipes including breaking unservicable pipes of any description and removal of debris to a dist exc 50 mtrs but n.exc 250 mtrs complete all as specified.

Supply and fixing in repairs RCC bends of 150 mm dia laid and jointed complete all as specified and directed.

Supply and fixing mild steel 10 mm dia round bars in bands, straps, clamps, hooks (Pins) fixed in pillars of gate for holding of barbed wire fencing etc complete

Supply chain link MS galvanised fencing, any size or type etc complete all as specified & directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified & directed

Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for boulder pitching grouted with cement and sand mortar in CM :6 complete all as directed.

Rough Excavation not exceeding 1.50 mtr deep and getting out in any type of soil complete all as specified.

Material and labour for PCC 1:4:8 type D2 75 mm thick using 40 mm graded stone aggregate as in pavement and hard standing complete all as specified.

Material and labour for Hand rails , half round or other steel section or core for wooden hand rail straight portion drilled and counter sunk for balusters runninbars , for doors balusters nosing to steps including embeddinin concrete and screwing etc wind ties for roof including securing bolts fencing post etc complete all as directed.

Supply and fixing in repairs framed works in doors or gates of angle or other section with gusset plates rails braces ect complete drilled for fixing steel sheeting orther covering doors etc complete all as specified and directed.

Supply and fixing in repairs 10 mm thick plaster of paris ceiling (Gypsum anhydrous ) to flat surface fixed with screw as per manufacures instrsuctions complete all as specified.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. and Material and labour for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/buzzer/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No. 90 here-in-before but one One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 90 here-in-before but One 3 pin socket out let 5 amp point on the same board with other switches.

All as per item No. 90 here-in-before but with 2.5sqmm size FLRS pvc insulated and unsheathed 1100 v grade single core stranded (multistarnded) copper conducted cable for 3 pin socket out let 15 amp on (independent) board

S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed. Make : Anchor/Havell's/Legrand

Supply and fix switch flush type , 5/6 Amps, Single pole, one way, 230 Volts AC circuit complete all as specified Make : Anchor/Havell's/Legrand

Supply and fix switch flush type , 15 Amps, Single pole, one way, 230 Volts AC circuit complete all as specified Make : Anchor/Havell's/Legrand

S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F switch socket combination multi-purpose , 3 pin, 5 and 15 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F earth plug and socket in repairs, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts Complete all as specified and directed. as per cat No. DPSDPO20 of Havells or equivalent of L & T Crompton Greaves with and including one MCB, SP, 20A, 240 Volts as per Cat No MCCSP020 of Havells or equivalent of L & T or Legrand

S & F deluxe electronic ceiling fan regulator step type, prewired and connecting all as directed. Make : Anchor cat part No 95501 or equivalent in Havell's/Legrand

S & F of elegantly industrial general purpose box type luminaire metal body, 1x16 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED tube 16 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and incl fixing arrangement of PVC square box for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-16 of crompton greaves or equivalent of Goldwyn/Wipro

Supply and fix In repair capacitor of capacity 2.5mfd (PVC body) in fans of any description complete as specified

Supply and fixing in repair MCCB thermal magnetic release 100 Amps 25 KA 415 Volts 50 Hz ISI marked connecting and fixing complete as specified

Supplying & fixing lamp holder, PVC/Polycarbonate type with cord grip cap suitable for LED/CFL lamp fittings complete all as specified and directed.

Supply only LED lamp 14/15 watt 6500k t Complete all as specified and directed.

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-42 protection with Din rail and busbar Complete all as specified and directed. Make : Indo asian cat part No- KSLS008 Or Equvalent model of Havells/ L&T

S & F MCB SPN 230V, C series, 6A to 32Amps 10 KA rating ISI marked and connecting complete all as specified.

S & F MCB Single pole 230V, C series, 6A to 32Amps 10 KA rating ISI marked and connecting complete all as specified.

Taking down submain wiring and Material and labour for sub main wiring in repairs using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating 1100 Volts drawn in and including surface casing and caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead 25 X 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.)

Supply and fix and jointing and connecting XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade of the cross sectional area 10 Sqmm 2 Core including taking down existing unserviceable cable etc complete all as specified and directed. ( Excavation, earth work, sand coushioning, precast cable cover etc shall be measured and paid for separately under appropriate items of Sch 'A'). Make: Havells/Polycab/Plaza

Supply and fix and jointing and connecting XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade of the following cross sectional area 16 Sqmm 4 Core including taking down existing unserviceable cable etc complete all as specified and directed. ( Excavation, earth work, sand coushioning, precast cable cover etc shall be measured and paid for separately under appropriate items of Sch 'A'). Make: Havells/Polycab/Plaza

Returning, filling i including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Removing excavated material not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fill dry river sand in trenches for cable cushioning (above and below the cable as per SSR-I) complete all as specified and directed.

Supply and fix precast concrete cable covers class LV type 1, flat size 250 x 150 x 40 mm M-20 grade concrete for cable protection complete all as specified and directed.

Suply and fix LED light fitting 36 Watt, 2'x2' complete decorative type suitable for false ceiling ultra slim connecting up flexible cable 3 core 0.5 Sq mm copper conductor, flexible wire from ceiling rose. Make : Conforming to Cat part No LHECDIL7IL1W036 of Havells or equivalent in Crompton Greaves, Wipro, Goldwyn

Disconnecnting, dismantling and taking out the non functional Air Conditioner window type/Split type of any description, any make and in any position 1.5 TR/2.0 TR capacity Single Phase 50 HZ, strip opening, coil of indoor unit and brazing the discharge and suction line by and checking & retightening of all electrical connections. Replacement of minor part such as nut, bolts, screws, washers, fixing properly bracket housing of capacitors, relay incl replacment of unserviceable parts, cleaning and servicing of the AC with using caustic soda/detergent powder solution, taking out and removing unserviceable/defective wiring & parts incl painting the bottom with one coat of black synthetic enamel paint, replacement of unserviceable and defective parts brazing reassembling and testing of the AC complete all as specified and directed. Note :- (i) The replacement of defective/nonfunctional parts shall be measured & paid for seperatly as` supply only' under appropriate item of Schedul A and fixing charges for new items are deemed to be included under this item. (ii) The rate for above items are deemed to include for transpotation of AC to & from workshop as approved by Engr-in-Charge for necessary unserviceable screws/nuts/bolts /washer/packing etc with new one. (iii) Charging of gas if required shall be measured and paid for separatly under appropriate item of schedule A however vacuum and pressure leakage testing with nitrogen (N2) if any required is deemed to be included under the units rate quoted by the contractor for this item.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathedone twin core flat cable of size 2.5 Sqmm complete all as specified and as directed. Make : Anchor, Polycab, Havells

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathedone twin core flat cable of size 6 Sqmm complete all as specified and as directed.Make : Anchor, Polycab, Havells

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathedone twin core flat cable of size 10 Sqmm complete all as specified and as directed.Make : Anchor, Polycab, Havells

Supplying, fixing, connecting & testing energy efficient LED street light fitting (Module system) having nominal power consumption 45 watt with lamps, IP protection 65, with and including suitable GI pipe light grade, 1.5 Mtr long bracket made to shape and size with and angle of 120 degree fixed to poles etc with two nos of suitable clamps and connecting to over head lines with using 2.5 sqm aluminium conductor PVC insulated twin core weather proof cable etc complete all as specified and directed. Make : Confirming to model No LSTO-45-CDL of make Crompton/ Havell/Wipro.

Supplying, installing and testing of energy efficient 5 star rating ceiling fan white colour of 1200 mm sweep and hanging to the hook on ceiling and making necessary connection from ceiling fan to the ceiling rose / porcelain connector with PVC insulated PVC sheathed FR grade 3 core 0.5 sqmm copper conductor flexible wire 1100 volts grade and writing MES Number on the fan in black paint complete all as specified and directed. Make :- Bajaj (Super star) or equivalent CAT partv of make Havell's / C G / C & S

Supplying, installing and testing of exhaust fan white colour of 200 mm sweep with pvc louvers fixed with wall and making necessary connection from fan to the ceiling rose / porcelain connector with PVC insulated PVC sheathed FR grade 3 core 0.5 sqmm copper conductor flexible wire 1100 volts grade and writing MES Number on the fan in black paint complete all as specified and directed. Make :- Bajaj (Speed star) or equivalent CAT partv of make Havell's / C G / Maxima

Supply of screw for stainles steel of size 5 mm to 25 mm long all as specified

Supply only lead acid battery 12 V 70AH , Make - Exide/Amaron/Amco

S & F 40 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S & F 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S & F 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

zotabrothers

M/S S. SINGH TRADERS

Ahmed B Khatri