JJM-NHC

Construction of 40 KL capacity OHSR of 12.90 mts staging a with M30 grade design mix at the site selected by the Department, as per drawings and as specified in Technical Specification including earth work excavation in all types of soils in wet or dry conditions for foundations including cost and conveyance of all materials, cost and fabrication of steel, fixtures, labour charges and testing the reservoir for water tightness etc., complete for finished item of work as per the Standard Specifications and as per the provisions made in the SOR 2024-25. The rate is inclusive of cost of all materials and labour charges and all taxes, duties and levies, etc., complete for finished item of work, but excluding GST and Seigniorage charges, including Overheads and Contractors Profit @13.615%. (Rate Including DI Specials, DI Valves and suitable for SBC-15T/Sqm) 1). All concrete members shall be designed with M30 grade design mix. 2) Rate is for OHSRs with RAFT FOUNDATION 3) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including bottom of roof. 4) Rate inclusive of 2 coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections including cost of pipes, bends and valves as per departmental designs and drawings. 5) The above rates are applicable for basic wind speed of 150 KMPH . Fixtures include : a) RCC or Aluminium ladder inside 0.60 m wide. b) Spiral staircase on the outside shall be provided upto 200 KL. c) Lightening arrestor, including conductor and earthling etc.,d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60x0.60m as per IS specifications (light duty) - 2 Nos. f)Water level indicator of good quality with ebonite/copper float of approved pattern-1 No. g) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20m. i) D.I swan neck ventilators shall be provided in top dome and slab. j). Bed Blocks of 0.45m x 0.45m x 0.30m in CC M15 Mix below all the duck foot bends k) The rates are inclusive of CI verticals for all inlet, out let, overflow and scour connections( as per estimate diameters) and D.I valves. All valves near inlet, out let and for scour shall be D.I valves of heavy duty conforming to the specification etc., complete but excluding GST and Seigniorge charges but including overheads and contractor's profit @ 13.615%

Cost and Supply of HDPE 6Kg/Sqcm PE-100 Pipes 110mm.dia. HDPE pipe 6Kg/Cm2

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons there on including supply of pipes, lowering,laying and jointing of pipe lines true to alignment and gradient, trench excavtion for pipe lines in all soils except Rock requring blasting(2/3 machinery and 1/3 manual), and refilling trenches with excavated earth(other than rocky soils and boulders) with watering and tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete.including cost pipes and its specials. 110mm.dia. HDPE pipe 6Kg/Cm2

Supply, delivery and fixing of DI Sluice valves confirming to IS including CI Specials, to suit the pressure class of pipe, construction of RCC valve chambers as per requirement excluding taxes (Excluding of RCC Valve Chamber) ON HDPE Line 100mm dia on 110mm dia line

Supply, delivery and fixing of DI Sluice valves confirming to IS including CI Specials, to suit the pressure class of pipe, construction of RCC valve chambers as per requirement excluding taxes (Excluding of RCC Valve Chamber) ON HDPE Line Construction of RCC Valve Chambers : VC-80

Digging of horizontal bore well beneath the CC road for Laying Distribution Pipeline including Cost of the Digging of horizantal Borewell and HDPE Pipe etc. complete. For 110 mm dia HDPE Pipeline

Cost,Supply and fixing of Name Board of Size 1.80mt X 1.20 Mt with M.S.Squarepipe of 40mm X 40mm X3.20 mm for Verticals 2 No - 3.90 mt each ,Horizontals 2 Nos -1.80 mt each and Back support with M.S.square pipe of 25mm X 25mm X2.60mm verticals - 2 Nos - 1.20mt each for 18mm guage GI sheet board of size 1.80mt X 1.20 Mt and painting with enamel paint as per instructions of Engineer incharge and fixing in the ground in concrete including cost,conveynace of all materials ,fabrication charges, painting and labour charges etc complete Rate per 6'X4' size JJM Name Board : cost of M.S. Structural steel i.e. angles,plates,square pipes etc