Engaging agency for Conducting Third party Inspection to Ensure Quality , Control & Assurance on behalf of KNNL for work of- Survey, Investigation, Design, Supply, Erection,Testing and commissioning of Kiravatti Tank Filling scheme for filling up of MI/ZP Tanks located on Right Bank of Bedti River in Kiravatti and Madanuru gram panchayats inYallapura taluka and tanks located on left bank of Bedti River in Gunjavati and Mainalli grampanchayats in Mundgod taluka by lifting water from Bedti River o

Conducting Test on Soils- Sie ve Analysis.

Conducting Test on Soils -Liquid and Pla stic Limits.

Conducting Test on Soils -Standard Compaction OMC and MDD

Conducting Test on Soils Soaked CBR

Conducting Test on Soils - Differential Free Swell Index.

Conducting Test on Soils- Traxial shear at OMC

Conducting Test on Soils - Swelling Pressure

Conducting Test on Soils - Specific Gra vity

Conducting Test on Soils- Insitu density and moisture content

Conducting Test For Cement-Consistency test

Conducting Test For Cement- Soundness Test

Conducting Te st For Cement- Initial and Final Setting time

Conducting Test For Cement.- Fineness test..

Conducting Test For Cement Compressive strength test set of Three Nos

Conducting Test on Fine Aggregate-Sieve Analysis

Conducting Test on Fine Aggregate-Specific Gravity, Bulk Density, Bulking and Moisture Content and Water Absorption.

Conducting Test on Fine Aggregate Fine ness Modulus

Conducting Test on Fine Aggregate-Silt Content

Conducting Laboratory Test on Coarse Aggr egate - Sieve Analysis

Conducting Laboratory Test on Coarse Aggre gate -Specific gravity, Bulk density

Conducting Laboratory Test on Coarse Aggregate- Aggrega te Impact Value.

Conducting Laboratory Test on Coarse Aggregate Abrasion Value

Conducting Laboratory Test on Coarse Aggre gate - Crushing Value

Conducting Test on Water -pH Value Water.

Conducting Test on Steel -Conducting lab test on steel (round bar twisted ) for determining tensile strength,elongation, 0.2 percentproof stress and unit weight of Dia 8mm, 10mm ,12mm, 16mm and 20mm.

Conducting Test for Mix Designs - 40 M10

Conducting Test for Mix Designs - 20 M 15

Conducting Test for Mix Designs - 40 M 20

Conducting Test for Mix Designs - 20 M 25

Conducting Test for Mix Designs 20 M 30

Conducting Compre ssion Test on Cement mortor Cement Concrete cubes- Compressive Test per set of 3 Cubes

Conducting Test on Granular Sub Base - G S B Mix Design

Conducting Test on Granular Sub Base - Si eve Analysis

Conducting Test on Granular Sub Base-Sutability test Water Absorption, 10 pe rcent Fines Value, Liquid and Plastic Limit, Impact Value, Compression Value, Modified Comp action

Conducting T est on Granular Sub Base- field Density test Core Cutte r

Conducting Test for Wet Mix Macadam -WMM Mix Design

Conducting Te st for Wet Mix Macadam- Sieve Analysis.

Conducting Test for Wet Mix Macadam Sutability test Water Absorption, Liquid and Plastic Limit, Impact Value, Flekiness & Elongation Index Compression Value, Modified Compaction.

Conducting Test forWet Mix Macadam- Field Compaction Test for WMM (core cutter).

Conducting Test for Dense Bituminous Macadam-DBM Mix Design.

Conducting Testfor Dense Bituminous Macadam- Seive Analysis.

Conducting Test for Dense BituminousMacadam- Impact Value.

Conducting Test for DenseBituminous Macadam- Abrasion Value.

ConductingTest for Dense Bituminous Macadam- Flekiness & Elongation Index, Water Absorption, Density.

Conducting Test forDense Bituminous Macadam - Specific Gravity.

Conducting Test forDense Bituminous Macadam-Flash and Fire Point.

Conducting Test for Dense Bituminous Macadam- softening point.

Conducting Test for Dense Bituminous Macadam- Penetration.

Conducting Test for Dense Bituminous Macadam- Ductility.

Conducting Test fo r Bituminous Concrete - BC Design Mix.

Conducting Test for Bituminous Concrete-Seive Analysis.

Conducting Test forBituminous Concrete - Impact Value.

Conducting Test forBituminous Concrete - Abrasion Value.

Conducting Testfor Bituminous Concrete - Flekiness & Elongation Index, Water Absorption, Density.

Conducting Test for Bituminous Concrete - Specific Gravity.

Conducting Test for Bituminous Concrete - Flash and fire Point.

Conducting Test for Bituminous Concrete - softening point.

Conducting Test for Bituminous Concrete - Penetration.

Conducting Test for Bituminous Concrete - Ductility Test.

Conducting Test for Bricks - Water Absorption.

Conducting Test for Bricks - Compressive strength.

Conducting Test for Bricks - Efflorescence (per Set of five).

Conducting Test for Bricks - Dimensional Analysis.

Conducting Test for Non- Destructive Test -Rebound Hammer .

Conducting Test for Non -Destructive Test -Conducting ultrasonic Testing on welded joints at site including all charges.

Conducting test for Hydraulic Test - Hydrostatic Pressure test for MS Pipes (witness).

Conducting test for Hydraulic Test- Hydrostatic Pressure test for HDPE Pipes (witness).

Conducting test for Hydraulic Test -Epoxy Coating Thickness Test MS Pipe.

Inspection- Rate for Factory Inspection for testing of electrical / mechanical equipments as per approved QAP.(Electro Mechanical Expert) inclusive of TA, DA & Incidental charges etc. Within the State.

Inspection-Rate for Factory Inspection for testing of electrical / mechanical equipments as per approved QAP.(Electro Mechanical Expert) inclusive of TA, DA & Incidental charges etc. Out side the state.

Conducting Tests onElectro Mechanical EquipmentsTesting Commissioning of Power Transformers Testing Ratio Test SC TestExcitation Current Test Highpot Test Magnetic Balance Test Vector Group Test, Induced High voltage test OLTC Operation Local and Remote Protective Devices operation checks,Stability checks For Differential REFRProtectionWinding Resistance Test Insulation Resistance Test, TanDelta andCapacitance Test,Transformer mounted protective Devices Sweep Frequency Response Anlysis.

Transformer OIL test ( Main Tank/Top/Bottom/OLTC)- a. Break down voltage(BDV), b. Dielectric Dissipation Factor(Tan Delta), c. Neutralization number(Acidity), d.Flash Point, e.Gas Analysis, f.Kinematic Viscocity

Condition Monitoring test on Motors - Online Test Electrical Signature Analysis, Vibration Analysis, Acoustic Emission Analysis

Condition Monitoring test on Motors - offline test a. Insulation Resistance (IR) Test, b. Dielectric Discharge (DD)Test, c.Capacitance & Tan Delta Test, d.DC Winding Resistance Test, e. Partial Discharge Test (offline). f.Surge Comaparison test, g.Winding Circuite Analysis (MCSA)

Testing & Commissioning Wiring Identification of wires, ferruling, crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs & Breaker for operation. -A.For additional 33kV panel (indoor type)

Condition Monitoring Test on Building LA - Earth Resistance, Continuity Testing, Physical Inspection

Condition Monitoring Test on Earth Pit- Earth Resistance

Condition Monitoring Test on Earth Rubber Mat.Thickness, AC Proof Voltage, AC Dielectric Strength, Leakage Current, Breakdown voltage, Insulation Resistance.

Condition Monitoring Test on Busbar Insulation Resistance ( IR)

Condition Monitoring Test on EOT Crane Insulation Resistance (IR), Functional checks for control panel

Relay Testing (33KV ) Fuse failure relay,DC failure relay, Check synchronizing relay, Transformer differential relay,Buchholz Relay,Motor Protection, Feeder Protection,Thermal over load relay

Condition Monitoring Test on Capacitors,Insulation Resistance (IR),Functional checks Operational Checks.

Condition Monitoring Test on Soft Starter , All relay secondary injection & Timing checK, All meters calibration tests.

Condition Monitoring Test on LT MCCB/ACB Insulation Resistance (IR),All relay secondary injection & Timing check, All meters calibration tests,Functional checks for contol panel.