Laying if 250mm dia MS clear water pipeline from Bisra to Timber colony

Supplying all material, labour T&P & laying in trenches M.S pipes & specials for culvert, nallah & other difficult places as per IS-3589 of the following nominal diameter as per specification complete including cost & carriage of pipes within 5 K.M and painting Pipes two coats with anti corosive paint of approved quality (earth work in excavation in trenches jointing of pipes& specials to be measured separately) 273mm dia (6.30 mm thick)

Flame cutting and facing of MS plate upto 8mm thick as per specification complete

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete

Supplying all material, labour, T&P for crossing of M.S./D.I.pipe line across Railway track by Horizontal Directional drilling method including encasing the pipe line by 406.4mm dia M.S pipe as(6.3 mm thick) per specification & direction of Engineer-in-charge etc all complete .

Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.

Valve chamber size:-[1.00x1.00x1.50mtr] 250-450mm dia. S/V. with RCC cover slab

Air valve chamber internal size:-[0.90x0.90x1.00mtr] with RCC cover slab

Supplying all materials,labour and T&P for fixing DI Non Rising Spindle type Sluice Valve confirming to IS 14846 of valve with double flanged ends for water works purposes of the following rating and diameter including testing of joints as per specification all complete. Make- (VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) 250mm (PN 1.6)

Supplying all labour materials and T&P fitting and fixing of cdouble chamber DI Control valve (globe type) with solenoid , hydraulic operated with stem amd Positioner for feed back switch, selonoid valve, integral orifice plate assembly, differential control, reverse flow control, restriction orifice Body PN-1.6 can be integrated with PLC pannel for operation with a minimum Pressure in upstream 0.2 kg/cm2 to a maximum pressure of 8 kg/cm2 of The Approved Make : CLA/AVK /Singer/IVC/Equivalent make with approval of the authority to control water supply including cost of material with all taxes transporataion to Site/Storage with insurance. 250mm(PN 1.6)

Supplying all labour materials and T&P fitting and fixing of Supply of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 68 signal converter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagnostics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition .The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation.The Approved Make : (KROHNE MARSHALL/E&H/ABB/SIEMENS/Equivalent make with approval of authority) including cost of material with all taxes transporataion to Site/Storage with insurance. 250 mm dia Electro Magnetic Water flow meter

Supplying all materials,labour and T&P for fixing of Tamperproof Kinetic Air Valve 100mm Air valve for water works purposes of the following diameter including drilling the water main etc.all complete. (Make:VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority)

RCC Thrust Block For 300 to 350mm dia Pipe.

For 22.5° to 45° Bend (Size -1.50 m x 1.50 m x 1.20 m )