Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹89.9 L+₹10.1 L (12.7%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹90.8 L+₹11.0 L (13.8%)Rejected-Finance BHUJ NAKHTRANA HIGHWAY ROAD AT POST SHUKPAR NAVAVAS BHUJ KUTCHH 370040 GUJ | KACHCHH | GUJARAT | 370040 | L3 | Rejected-Finance NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/s Bombay Novelty Stores L2 | Mepani Construction Company L3 | S.G.ENGINEERING COMPANY L1 |
|---|---|---|---|---|---|---|
| 1.00 | M & L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using binder content minimum 4% (bitumen grade VG-30) by weight of total mix including preparation of existing pot holes to receive the macadam, complete all as specified and as directed. | 3.75 | Cubic Metre | 10,200 ₹38,250 | 11,200 ₹42,000 | 8,500 ₹31,875 Lowest |
| 2.00 | M & L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness more than 75mm) using binder content minimum 4% (bitumen grade VG-30) by weight of total mix including preparation of existing pot holes to receive the macadam, complete all as specified and as directed. | 4 | Cubic Metre | 10,000 ₹40,000 | 11,200 ₹44,800 | 8,500 ₹34,000 Lowest |
| 3.00 | Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS:8887 at a rate of application of 0.2 - 0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after preparing and cleaning of existing surface including removing caked muds, sweeping etc. as specified and directed. | 2,085 | 10 Sqm | 340 ₹7,08,900 | 350 ₹7,29,750 | 325 ₹6,77,625 Lowest |
| 4.00 | M&L for bituminous premix semi dense asphaltic concrete (SDAC) 30 mm thick consolidated thickness with minimum 5.5% binder content (VG-30) by weight of total mix, rolled and compacted to required camber and gradient complete by using computerised hot mix plant, mechanical pavor and rolling by 8 to 12 ton power roller complete all as specified. | 2,085 | 10 Sqm | 3,600 ₹75,06,000 | 3,634 ₹75,76,890 | 3,275 ₹68,28,375 Lowest |
| 5.00 | M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like exc 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS3262-1989 with sepcial applicator machine all as per manufacturers instruction complete all as specified and directed. | 759 | Square Metre | 700 ₹5,31,300 | 680 ₹5,16,120 | 450 ₹3,41,550 Lowest |
| 6.00 | Dismantling of old MS section of any type used for road sign board with retroreflective material sheet. | 6 | Each | 200 ₹1,200 Lowest | 300 ₹1,800 | 1,000 ₹6,000 |
| 7.00 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 600 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. | 3 | Each | 25,000 ₹75,000 | 26,500 ₹79,500 | 10,500 ₹31,500 Lowest |
| 8.00 | Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 600 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC;67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of
Engineer-in-charge. | 3 | Each | 30,000 ₹90,000 | 29,500 ₹88,500 | 9,500 ₹28,500 Lowest |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
21 Aug 2025, 6:00 pmClosed
CWE (AF) BHUJ
CWE (AF) BHUJ KHAVDA ROAD BHUJ KACHCHH PIN 370001
REPAIR AND RESURFACING OF CERTAIN ROADS AND ROAD FURNITURE, ROAD MARKING PAINT IN CERTAIN LOCATION AT TECHNICAL AREA AT AF STN NALIYA
2025_MES_720029_1
85293/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
NALIYA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE (AF) NALIYA
₹1.6 L
Yes
23 Sept 2025
12 Jul 2025
23 Aug 2025
12 Jul 2025
21 Aug 2025
2 Aug 2025
Amount
M & L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using binder content minimum 4% (bitumen grade VG-30) by weight of total mix including preparation of existing pot holes to receive the macadam, complete all as specified and as directed.
M & L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness more than 75mm) using binder content minimum 4% (bitumen grade VG-30) by weight of total mix including preparation of existing pot holes to receive the macadam, complete all as specified and as directed.
Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS:8887 at a rate of application of 0.2 - 0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after preparing and cleaning of existing surface including removing caked muds, sweeping etc. as specified and directed.
M&L for bituminous premix semi dense asphaltic concrete (SDAC) 30 mm thick consolidated thickness with minimum 5.5% binder content (VG-30) by weight of total mix, rolled and compacted to required camber and gradient complete by using computerised hot mix plant, mechanical pavor and rolling by 8 to 12 ton power roller complete all as specified.
M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like exc 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS3262-1989 with sepcial applicator machine all as per manufacturers instruction complete all as specified and directed.
Dismantling of old MS section of any type used for road sign board with retroreflective material sheet.
Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 600 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.
Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 600 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC;67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.
M/s Bombay Novelty Stores (BID ID -3381176)
Mepani Construction Company (BID ID -3385774)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .