Maintenance contract for residential and non-residential building and KV school at Gopalpuri for two years.

Name of Work:- Maintenance contract for residential and non-residential building and KV school at Gopalpuri for two years.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

1.00 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth,

1.5 m in width as well as 10 sqm on plan) including getting out Rs. One Hundred Fourty Three and Eight Two

288.00 143.82 m3 One meter cube

and disposal of excavated earth lead upto 50 m and lift upto 1.5 Only

m, as directed by Engineer-in-charge. (a ) all kind of soil

2.00 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in Rs. One Hundred Seventy Seven And Seventy

depth, consolidating each deposited layer by ramming and 229.00 177.77 m3 One meter cube

watering, lead up to 50 m and lift upto 1.5 m

3.00 Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of Rs. Two Thousand Forty Nine And Sixty Nine

137.00 2,049.67 m3 One meter cube

unserviceable material within 50 metres lead as per Only

direction of Engineer - in- charge

4.00 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of Rs. One Thousand One Hundred Eighty Eight

unserviceable material within 50 metres lead as per 107.00 1188.92 m3 One meter cube

And Ninty Two Only

direction of Engineer-in charge.(a) in cement mortar

5.00 Demolishing stone rubble masonry manually/ by mechanical

means including stacking of serviceable material and disposal of Rs. Six Hundred Sixty Eight And Thirty Six

80.00 668.36 m3 One meter cube

unserviceable material within 50 metres lead as per direction of Only

Engineer-in-charge : (a) in lime mortar

6.00 Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead. 1045.00 42.35 Rs. Forty Two and Thrity Five Only m2 One meter square

(a) For thickness of tiles 10 mm to 25 mm

7.00 Dismantling doors, windows and clerestory windows (steel

or wood) shutter including chowkhats, architrave, holdfasts Rs. Two Hundred Eleven And Eighty Nine

416.00 211.89 m2 One Square meter

etc. complete and stacking within 50 metres lead :(A) Of area Only

3 sq. metres and below

8.00 Felling trees of the girth (measured at a height of 1 m above

ground level), including cutting of trunks and branches,

removing the roots and stacking of serviceable material and

disposal of unserviceable material.

(i) Rs. Three Hundred Seven and Forty Eight

Beyond 30 cm girth upto and including 60 cm girth 100.00 307.48 Each Each

(ii) Rs. One Thousand Three Hundred Seventy

Beyond 60 cm girth upto and including 120 cm girth 45.00 1,370.01 Each Each

And Zero One Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(iii) Rs. Six Thousand Three Hundred Fifty Eight

Beyond 120 cm girth upto and including 240 cm girth 25.00 6,358.84 Each Each

And Eighty Four Only

(iv) Rs. Twelve Thousand Seven Hundred Thirty

Above 240 cm girt 10.00 12,739.09 Each Each

Nine And Zero Nine

Demolishing lime concrete manually/ by mechanical means and

disposal of material within 50 metres lead as per direction of 240.00 491.37 Rs. Four Hunderd Ninty One and Thirty Seven M3 One Cubic Meter

Engineer-in-charge.

10.0 Demolishing cement concrete manually/ by mechanical

means including disposal of material within 50 metres lead

as per direction of Engineer - in - charge.

(A) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 482.00 867.72 Rs. Eight Hundred Sixty Seven and Seventy Two m3 One Cubic meter

11.0 Brick work with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in superstructure above plinth level up

to floor V level in all shapes and sizes in :

(A) Rs. Five Thousand Eight Hundred One and

Cement mortar 1:6 (1 cement : 6 coarse sand) 46.00 5,801.85 m3 One Cubic Meter

12.0 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills, staircases

and spiral stair cases above plinth level up to floor five level, Rs. Seven Thousand Five Hundred Three and

88.00 7,503.51 m3 One Cubic meter

excluding the cost of centering, shuttering, finishing and Fifty One

reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-

III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources).

13.0 Centering and shuttering including strutting, propping etc.

and removal of form for all heights.

(A) Columns, piers, abutments, pillars, posts and struts 672.00 562.98 Rs. Five Hundred Sixty Two and Ninty Eight m2 One Sq.meter

(B) Suspended floors, roofs, landings, balconies and access

platform 540.00 536.59 Rs. Five Hundred Thirty Six and Fifty Nine m2 One Sq.meter

14.0 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

(A) up to plinth level :: 4 coarse sand (zone-III) derived from natural

1:4:8 (1 Cement Rs. Four Thousand Four Hundred Twenty

50.00 4,428.24 m3 One Cubic meter

sources : 8 graded stone aggregate 40 mm nominal size derived Eight and Twenty Four

from (1 Cement:

natural sources)1½ coarse sand : 3 graded stone Rs. Five Thousand Four Hundred Forty Eight

225.00 5,448.56 m3 One Cubic meter

aggregate 20 mm nominal size). and Fifty Six

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

15.0 Steel reinforcement for R.C.C. work including straightening,

cutting,bending, placing in position and binding all complete

above plinth level.

(A) Thermo-Mechanically Treated bars of grade Fe-500D or 9680.00 62.76 Rs. Sixty Two and Seventy Six kg Per Kilogram

16.0 Providing and fixing bright finished brass tower bolts

(barreltype) with necessary screws etc. complete :

(A) 200x10 mm 100.00 210.39 Rs. Two Hundred Ten and Thirty Nine Each Each

(B) 100x10 mm 150.00 112.21 Rs. One Hundred Twelve and Twenty One Each Each

(C ) 150x10 mm 120.00 162.61 Rs.One Hundred Sixty Two and Sixty One Each Each

17.0 Providing and fixing chromium plated brass handles with

necessary screws etc. complete:

(A) 125 mm 300.00 158.55 Rs. One hundred Fifty Eight and Fifty Five Each Each

(B) 100 mm 200.00 139.44 Rs. One Hundred thirty Nine and Forty Four Each Each

(C ) 75 mm 100.00 125.41 Rs. One Hundred Twenty Five and Forty One Each Each

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural drawings

and the directions of Engineer-in-charge . (Cost of aluminium

(i) With float glass panes of 4.0 mm thickness (weight not less than One Square

200.00 713.86 Rs. Seven Hundred Thirteen and Eighty Six m2

10 kg/sqm) meter

(ii) With float glass panes of 5.5 mm thickness (weight not less than Rs. Nine Hundred Twenty Seven and Eighty One Square

12.50 kg/sqm) Nine meter

(iii) With float glass panes of 8 mm thickness (weight not less than One Square

75.00 1,047.31 Rs. One Thousand Forty Seven and Thirty One m2

20 kg/sqm) meter

For shutters of doors, windows & ventilators including providing

and fixing hinges/ pivots and making provision for fixing of

fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required

(i) 444.00 372.26 Rs. Three Hundred Seventy Two and Twenty Six Kg Per Kilogram

shade according to IS: 1868, Minimum anodic coating of grade

(ii) Powder coated aluminium (minimum thickness of powder coating

micron) 395.36 Rs.Three Hundred Ninty Five and Thirty Six Kg Per Kilogram

Polyester powder coated aluminium (minimum thickness of

(iii) 403.00 401.38 Rs. Four Hundred One and Thirty Eight Kg Per Kilogram

polyester powder coating 50 micron)

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

Providing and fixing in position collapsible steel shutters with

vertical channels 20x10x2 mm and braced with flat iron

diagonals 20x5 mm size, with top and bottom rail of T-iron One Square

6578.15 Rs. Six Thousand Five Hundred Seventy Eight and Fifteen

40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, meter

nuts, locking arrangement, stoppers,handles, including applying

a priming coat of approved steel primer.

Providing and fixing 1 mm thick M.S. sheet sliding shutters,

with frame and diagonal braces of 40x40x6 mm angle iron,

mm M.S. gusset plates at the junctions and corners, 25 mm dia One Square

21.0 37.00 3762.05 Rs. Three Thousand Seven Hundred Sixty Two and ZeroM2

pulley, 40x40x6 mm angle and T- iron guide at the top and meter

bottom respectively, including applying a priming coat of

approved steel primer.

Supplying and fixing rolling shutters of approved make, made of

required size M.S. laths, interlocked together through their entire

length and jointed together at the end by end locks, mounted on

specially designed pipe shaft with brackets, side guides and

22.0 arrangements for inside and outside locking with push and pull

operation complete, including the cost of providing and fixing

necessary 27.5 cm long wire springs manufactured from high

tensile steel wire of adequate strength conforming to IS: 4454 -

part 1 and M.S. top cover of required thickness for rolling

(i) 80x1.20 mm M.S. laths with 1.20 mm thick top cover 64.00 2007.81 Rs. Two Thousand Seven and Eighty One M2 One Square meter

(ii) Providing and fixing ball bearing for rolling shutters. 8.00 296.94 Rs. Two Hundred Ninty Six and Ninty Four Each Each

Extra for providing mechanical device chain and crank operation

for operating rolling shutters.

(iv) Exceeding 10.00 sqm and upto 16.80 sqm in the area 4.00 776.09 Rs. Seven Hundred Seventy Six and Zero Nine Each Each

Extra for providing grilled rolling shutters manufactured out of

(v) mm dia M.S. bar instead of laths as per design approved by 16.00 468.27 Rs. Four Hundred Sixty Eight and Twenty Seven M2 One Square meter

Engineer-in- charge,(area of grill to be measured).

23.0 Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4

(1 cement : 2 coarse sand (zone-III) derived from natural 3016.00 259.60 Rs. Two Hundred Fifty Nine and Sixty m2 one square meter

sources : 4 graded stone aggregate 12.5mm nominal size

derived from natural sources)

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

24.0 Surface dressing of the ground including removing

vegetation and in-equalities not exceeding 15 cm deep and

disposal of rubbish, lead up to 50 m and lift up to 1.5 m.(a) 27620.00 19.71 Rs. Nineteen and Seventy One m2 One Square meter

all kind of soil

25.0 Clearing jungle including uprooting of rank vegetation, grass,

brush wood, trees and saplings of girth up to 30 cm

measured at a height of 1 m above ground level and removal 46860.00 10.15 Rs. Ten and Fifteen m2 One meter square

of rubbish up to a distance of 50 m outside the periphery of

the area cleared.

26.0 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/ appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285, fixing

with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom

and sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight,

mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as

per architectural drawings and the directions of Engineer-in-

Anodised(Glazing, paneling

aluminium and dash

(anodised fastenersortodyed

transparent be paid

required shade according to IS: 1868, Minimum anodic 541.00 303.77 Rs. Three Hundred Fourty One Kg Per Kg

coating of grade AC 15)

(ii) Powder coated aluminium (minimum thickness of powder

282.00 326.41 Rs. Two Hundred Eighty Two Kg Per Kg

coating 50 micron)

(iii) Polyester powder coated aluminium (minimum thickness of

231.00 332.29 Rs. Two Hundred Thirty One Kg Per Kg

polyester powder coating 50 micron)

27.0 Filling the gap in between aluminium/ stone/ wood frame

and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum

work by providing weather/structural non sag elastomeric

PU sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge

complete, complying to ASTM C920, DIN 18540-F & ISO

(i) Upto 5 mm depth and 5 mm width 800.00 91.14 Rs. Ninty One and Forteen only Meter One Meter

(ii) Upto 10 mm depth and 10 mm width Rs. One Hundred Twenty Three and Ninty

450.00 123.90 Meter One Meter

Rs. Two Hundred Twenty Four and Eighteen

(iii) Upto 20 mm depth and 20 mm width 300.00 224.18 Meter One Meter

28.0 Filling the gap in between aluminium frame & adjacent RCC/

Brick/ Stone work by providing weather silicon sealant over

backer rod of approved quality as per architectural drawings

and direction of Engineer-in-charge complete

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(A) Upto 5mm depth and 5 mm width 951.00 59.68 Rs. Fifty Nine and Sixty Eight Only Meter One Meter

29.0 Providing and fixing 12 mm thick prelaminated particle

board flat pressed three layer or graded wood particle board

conforming to IS: 12823 Grade l Type ll, in panelling fixed in

aluminum doors, windows shutters and partition frames

with C.P. brass / stainless steel screws etc. complete as per

architectural drawings and directions of engineer-in-charge

Pre-laminated particle board with decorative lamination on Rs. Six Hundred Sixty Five and Seventy Four One Square

both sides Only meter

30.0 Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS :

having brand logo embossed on the body / plate with

double spring mechanism and door weight upto 125 kg, for

doors, including cost of cutting floors, embedding in floors as

required and making good the same matching to the existing

floor finishing and cover plates with brass pivot and single

piece M.S. sheet outer box with slide plate etc. complete as

per the direction of Engineer-in-charge.

(i) Rs. One Thousand Seven Hundred Forteen

With stainless steel cover plate minimum 1.25 mm thickness 20.00 1,714.20 Each Each

and Twenty Only

31.0 Providing and fixing tiled false ceiling of specified materials

of size 595x595 mm in true horizontal level, suspended on

interlocking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 suitably spaced joints to get

required length and of size 24x38 mm made from 0.30 mm

thick (minimum) sheet, spaced at 1200 mm center to center

and cross "T" of size 24x25 mm made of 0.30 mm thick

(minimum) sheet, 1200 mm long spaced between main "T"

at 600 mm center to center to form a grid of 1200x600 mm

and secondary cross "T" of length 600 mm and size 24x25

mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3 mm

and laying false ceiling tiles of approved texture in the grid

including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling

with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanized butterfly level clips of size

85 x 30 x 0.8 mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-sections

shall be pre-painted with polyester paint, all complete for all

heights as per specifications, drawings and as directed by

Engineer-in-charge.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(i) 12.5 mm thick fully Perforated Gypsum Board tile made

from plasterboard having glass fibre conforming to IS:

part I, of size 595x595 mm, having perforation of 9.7x9.7

Rs. Eight Hundred Seventy Three and Twenty One Square

mm at 19.4 mm c/c with center borders of 48 mm and the 540.00 873.25 m2

Five Only meter

side borders of 30 mm, backed with non woven tissue on the

back side, having an NRC (Noise Reduction Coefficient) of

0.79, with 50 mm resin bonded glass wool backing.

32.0 Providing & fixing false ceiling at all height including

providing & fixing of framework made of special section,

power pressed from M.S. sheets and galvanised with zinc

coating of 120 gms/ sqm (both side inclusive) as per IS :

and consisting of angle cleat of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm c/c, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x

50 mm long with 6 mm dia bolts, other flange of cleat fixed

to the angle hangers of 25 x10 x0.50 mm of required length

with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I chanels 45 x15 x 0.90 mm

running at the spacing of 1200 mm c/c, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5mm, at 450 mm

c/c, shall be fixed in a direction perpendicular to G.I

intermediate channel with connecting clip made out of

mm dia x 230 mm long G.I wire at every junction, including

fixing perimeter channels 0.50 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling

fixed to wall/ partitions with the help of Rawl plugs at

mm centre, with 25 mm long dry wall screws @ 230 mm

interval, including fixing of Calcium Silicate Board to ceiling

section and perimeter channels with the help of dry wall

Rs. Nine Hundred Thirty One and Twenty

(a) 8 mm thick Calcium Silicate Board made with Calcareous & 300.00 931.28 m2 One Meter Square

Siliceous materials reinforced with cellulose fiber manufactured

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

33.0 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the

angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section

mm thick bottom wedge of 80 mm with tapered flanges of

mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x

mm long G.I.wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre,with 25mm long

dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of

dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound

, jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification

(a) 12.5 mm thick tapered edge gypsum moisture resistant board

420.00 910.35 Rs. Nine Hundred Ten and Thirty Five Only m2 One Meter Square

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

34.0 "Providing and laying design mix cement concrete of M30

grade, in roads/ taxi tracks/ runways, using cement content

as per design mix, using coarse sand and graded stone

aggregate of 40 mm nominal size in appropriate proportions

as per approved & specified design criteria, providing dowel

bars with sleeve/ tie bars wherever required, laying at site,

spreading and compacting mechanically by using needle and

surface vibrators, levelling to required slope/ camber,

finishing with required texture, including steel form work

with sturdy M.S. channel sections, curing, making provision

for contraction/expansion, construction & longitudinal joints

( 10 mm wide x 50 mm deep) by groove cutting machine,

providing and filling joints with approved joint filler and

sealants, complete all as per direction of Engineer-incharge

(Item of joint fillers, sealants, dowel bars with sleeve/ tie

bars to be paid separately).Note:- Cement content

considered in M-30 is @ 340 kg/cum. Excess/less cement

used as per design mix is payable/ recoverable separately.

(i) Cement concrete prepared with batch mixing machine Rs. Six Thousand Six Hundred Forty Five and

53.00 6,645.03 M3 One meter cube

Zero Three Only

35.0 Painting road surface marking with adequate nos of coats to

give uniform finish with ready mixed road marking paint

conforming to IS the surface of all dirt, scales, oil, grease and

foreign material etc. complete.

(i) Rs. One Hundred Sixty Seven and Ninty Seven One Square

New work (Two or more coats) 40.00 167.97 m2

(ii) One Square

old work (Two or more coats) 400.00 110.32 Rs.One Hundred Ten and Thirty Two Only m2

36.0 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of

nosing of steps etc. complete. Rs. Three Hundred Eighty One and Fifty One Square

(A) 40 mm thick with 20 mm nominal size stone aggregate 1845.00 381.50 m2

Seven Only meter

37.0 Providing and laying rectified Glazed Ceramic floor tiles of

size 300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades,except White, Ivory, Rs. Eight Hundred Fifty Seven and Fifty Seven One Square

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 705.00 857.57 m2

1:4 (1 Cement : 4 Coarse sand), jointing with grey cement

slurry @ 3.3kg/sqm including pointing the joints with white

cement and matching pigments etc., complete.

38.0 Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the Rs. Seven Hundred Forty Four and Forty Two One Square

manufacturer), of approved make, in all colours, shades 622.00 744.42 m2

except burgundy, bottle green, black of any size as approved

by Engineer-in- Charge, in skirting, risers of steps and dados,

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

39.0 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour

and texture laid over 20 mm thick base cement mortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing of edges to give high

gloss finish etc. complete at all levels.

(A) Area of slab over 0.50 sqm sqm Rs. Eighteen Hundred Forty Seven and Sixty One Square

40.0 Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing of edges to give high gloss finish etc. complete at all

(i) Area of slab over 0.50 sqm Rs. Three Thousand Ninty Seven and Seventy

150.00 3,097.75 M2 One Meter Sqare

41.0 Providing and laying Glazed Vitrified tiles Matt/Antiskid

finish vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less

Size 0.08% and conforming

Tile 600x600 mm to IS: 15622, of approved make, Rs. Nine Hundred Ninty One and Sixty Six One Square

(B) Size of Tile 800x800 mm Rs. Forteen Hundred Ninty Nine and Sixty One Square

Eight Only meter

( C) Size of Tile 1000x1000 mm Rs. Seventeen Hundred Eighty Six and Thirty One Square

Seven Only meter

(D) Size of Tile 600x1200 mm One Square

270.00 1,084.00 Rs. One Thousand Eighty Four Only m2

42.0 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

(i) Size of Tile 600x600 mm as per item no. 41 One Square

486.00 181.06 Rs. One Hundred Eighty One and Zero Six Only m2

(ii) Size of Tile 800x800 mm as per item no. 41 Rs. One Hundred Forty Three and Sixty One One Square

(iii) Size of Tile 1000x1000 mm as per item no. 41 One Square

180.00 102.62 Rs. One Hundred Two and Sixty Two Only m2

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

43.0 Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of

steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @

3.3 kg/ sqm including grouting the joint with white cement

& matching pigments etc. complete.

(A) Size of Tile 600x600 mm Rs. Onr Thousand Twenty Six and Fifty five One Square

44.0 Providing and laying matt finished vitrified tile of size

300x300x9.8mm having with water absorption less than

0.5% and conforming to IS: 15622 of approved make in all

colours and shades in for outdoor floors such as footpath, Rs. Eight Hundred Seventy Five and Fifty One Square

court yard, multi modals location etc., laid on 20mm thick Three Only meter

base of cement mortar 1:4 (1 cement : 4 coarse sand) in all

shapes & patterns including grouting the joints with white

cement mixed with matching pigments etc. complete as per

45.0 Providing and laying factory made chamfered edge Cement

Concrete paver blocks in footpath, parks, lawns, drive ways

or light traffic parking etc, of required strength, thickness &

size/ shape, made by table vibratory method using PU

mould, laid in required colour & pattern over 50mm thick

compacted bed of sand, compacting and proper

embedding/laying of inter locking paver blocks into the sand

bedding layer through vibratory compaction by using plate

vibrator, filling the joints with sand and cutting of paver

blocks as per required size and pattern, finishing and

sweeping extra sand. complete all as per direction of

(a) 80 mm thick C.C. paver block of M-30 grade with approved

color design and pattern. One Square

825.00 707.84 Rs. Seven Hundred Seven and Eighty Four m2

(b) 60mm thick cement concrete paver block of M-35 grade One Square

with approved colour, design & pattern. 950.00 652.65 Rs. Six Hundred Fifty Two and Sixty Five Only m2

46.0 Providing and fixing 10x10x7.50 cm Granite stone block

hand cut and chisel dressed on top, for paving in floors,

drains etc. laid over 20mm thick base mortar 1:4 (1 cement : Rs. Thirteen Hundred Ten and Twenty Six One Square

4 coarse sand) with joints 10mm wide filled with same Only meter

mortar including ruled pointing etc. complete as per

direction of engineer-in-charge.

47.0 Providing and fixing G.I. inlet connection for flush pipe

connecting with W.C. pan. 200.00 92.16 Rs. Ninty Two and Sixteen Only Each Each

48.0 Providing and fixing CP Brass 32mm size Bottle Trap of

approved quality & make and as per the direction of 100.00 620.38 Rs. Six Hundred Twenty and Thirty Eight Only Each Each

Engineer-in-charge.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

49.0 Providing and fixing CP Brass Single lever telephonic wall Rs. Forty Two Hundred Eighty Three and

mixer of quality & make as approved by Engineer in charge. 28.00 4,283.41 Each Each

a) 15 mm nominal dia

50.0 Providing and fixing PTMT bib cock of approved quality and

(A) 15 mm nominal bore, 122mm long, weighing not less than 300.00 100.31 Rs. One Hundred and Thirty One Only Each Each

51.0 Providing and fixing white vitreous china wash basin

including making all connections but excluding the cost of

(i) Flat back wash basin of size 630x450 mm 36.00 804.72 Rs. Eight Hundred Four and Seventy Two Only Each Each

(ii) Flat back wash basin of size 550x400 mm 40.00 640.82 Rs. Six Hundred Forty and Eighty Two Only Each Each

(iii) Angle back wash basin of size 600x480 mm 15.00 804.72 Rs.Eight Hundred Four and Seventy Two Only Each Each

Angle back wash basin of size 400x400 mm Rs. Five Hundred Twenty Three and Seventy

(iv) 14.00 523.74 Each Each

Rs. Three Hundred Eighty Seven and Ninty

(v) Flat back wash basin of size 450x300 mm 30.00 387.94 Each Each

(vi) Surgeon type wash basin of size 660x460 mm Rs. Eleven Hundred Fifty Five and Ninty One

5.00 1,155.91 Each Each

52.0 Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require:

(A) White Vitreous China Wash basin size 630x450 mm with a

Rs. Thirteen Hundred Thirty Nine and Sixty

single 15 mm C.P. brass pillar taps 50.00 1,339.63 Each Each

(B) White Vitreous China Flat back wash basin size 550x

mm with single 15 mm C.P. brass pillar taps Rs. Eleven Hundred Seventy Five and Seventy

80.00 1,175.72 Each Each

53.0 Providing & fixing white vitreous china water less urinal of

size 600 x 330 x 315 mm having antibacterial /germs free Rs. Eleven Thousan One Hundred Seventy

30.00 11,178.06 Each Each

ceramic surface, fixed with cartridge having debris catcher Eight and Zero Six Only

and hygiene seal.

54.0 Providing and fixing white vitreous china battery based

infrared sensor operated urinal of approx. size 610 x 390 x

370 mm having pre & post flushing with water (250 ml &

Rs. Forty Nine Hundred Three and Twelve

500 ml consumption), having water inlet from back side, 8.00 4,903.12 Each Each

including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer in-

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

55.0 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm

and 340x410x265 mm sizes respectively with automatic

flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing Rs. Thirty Six Hundred Eighty Eight and

20.00 3,688.20 Each Each

cistern Twenty Only

56.0 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm or 15.00 967.61 Rs. Nine Hundred Sixty Seven and Sixty One Only Each Each

340x410x265 mm sizes respectively.

57.0 Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic moulded

frame of approved make and shade with 6 mm thick hard

(i) Circular shape 450 mm dia Rs. Eight Hundred Seventy Four and Zero

30.00 874.02 Each Each

(ii) Rectangular shape 453x357 mm 55.00 811.27 Rs. Eight Hundred Eleven and Twenty Seven Only Each Each

(iii) Oval shape 450x350 mm 40.00 810.18 Rs.Eight Hundred Ten and Eighteen Only Each Each

(iv) Rectangular shape 1500x450 mm Rs. Twelve Hundred Seventy Two and Zero

35.00 1,272.04 Each Each

58.0 Providing and fixing 600x120x5 mm glass shelf with edges

round off, supported on anodised aluminium angle frame

with f brackets and ss guard rail complete fixed with 40 mm 100.00 659.51 Rs. Six Hundred Fifty Nine and Fifty One Only Each Each

long screws, rawl plugs etc., complete.

59.0 Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C., Rs. Five Hundred Forty One and Ninty Eight

300.00 541.98 M2 One Square Meter

kitchen and the like consisting of: Only

(i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction

of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement :

coarse sand) mixed with water proofing compound in

recommended proportion including rounding off junction of

vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied

hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and pasted to

each other with bitumen @ 1.7 kg/ sqm).

60.0 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) One Square

2188.00 206.40 Rs. Two Hundred Six and Forty Only m2

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

61.0 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) finished with a One Square

3300.00 309.93 Rs. Three Hundred Nine and Ninty Three Only m2

top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine meter

Cutting holes of required size in brick masonry wall for

fixing of exhaust fan including providing and fixing 300 mm

dia PVC pipe conforming BIS-12818 and making good the 200.00 170.17 Rs. One Hundred Seventy and Seventeen Only Each Each

same etc. complete as per direction of Engineer-in-charge

63.0 Fixing chowkhats in existing opening including embedding

chowkhats in floors or walls cutting masonry for holdfasts,

embedding hold fasts in cement concrete blocks of size 15 x

10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 graded stone aggregate 20 mm nominal size),

painting two coats of approved wood preservative to sides of

chowkhats and making good the damages to walls and floors

as required complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-

(i) Door chowkhats Rs. One Thousand Fifty Three and Seventy

70.00 1,053.71 Each Each

(ii) Window chowkhats Rs. Six Hundred Sixty Three and Sixty Four

100.00 663.64 Each Each

(iii) Clerestory window chowkhats

80.00 499.00 Rs.Four Hundred Ninty Nine Only Each Each

64.0 Fixing chowkhat in existing opening in brick/ RCC wall with

dash fasteners/ Chemical fasteners of appropriate size (3

nos on each vertical member of door chowkhat and 2 nos on Rs. One Hundred Thirty Three and Eighteen

120.00 133.18 Each Each

each vertical member of window chowkhats), including Cost Only

of dash fasteners/

chemical fastener.

65.0 Making the opening in brick masonry including dismantling

in floor or walls by cutting masonry and making good the

damages to walls, flooring and jambs complete, to match Rs.Seven Hundred Thirty Two and Forty Five

existing surface i/c disposal of mulba/ rubbish to the 100.00 732.45 Each Each

nearest municipal dumping ground, all complete as per

direction of Engineer-in- Charge.

66.0 Providing and fixing 16 mm M.S. Fan clamps of standard

shape and size in existing R.C.C. slab, including cutting chase,

anchoring clamp to reinforcement bar, including cleaning, Rs. Three Hundred Twenty Seven and Eughty

200.00 327.88 Each Each

refilling, making good the chase with matching concrete, Eight Only

plastering and painting the

exposed portion of the clamps complete.

67.0 Providing and fixing plain jaffri door and window shutters

including bright or/ and black enamelled M.S. butt hinges Rs. Twenty Nine Hundred Nine and Zero

88.00 2,909.03 m2 One sq.Meter

with necessary screws 35x10 mm laths placed 35 mm apart Three Only

(frames to be paid separately), including fixing 50x12 mm

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

68.0 Providing and fixing high quality SS 304 curtain rods of two

mm thickness with sider double brackets/concealed

premimum quality bracket fixed with ss screws and side

wherever necessary complete. Rs. Two Hundred Forty Eight and Sixty Nine

(i) diameter 400.00 248.69 m one meter

69.0 Providing and fixing M.S. round or square bars with M.S. flats

at required spacing in wooden frames of windows and 4500.00 69.79 Rs. Sixty Nine and Seventy Nine Only Kg Per Kg

clerestory windows.

70.0 Providing joists (karries) including hoisting, fixing in

position and applying wood preservative on unexposed

surface etc. complete with :

(i) Sal wood Rs. Sixty Three Thousand Eight Hundred Two

4.00 63,802.59 m3 One cubic meter

and Fifty Nine Only

71.0 Renewing bottom rail and/or top runner of collapsible gate

including making good all damages and applying priming Rs. One Hundred Seventy Two and Thirty One

900.00 172.31 Kg Per Kg

coat of zinc chromate yellow primer of approved brand and Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

72.0 Renewing Wrought iron or M.S. Wheel or roller of steel door

or gate and fitting and fixing the same with necessary

clamps, nuts and bolts/welding and erection etc. complete.

(i) Wheel 50 mm dia and below 40.00 105.25 Rs. One Hundred Five and Twenty Five Only Per Wheel Per Wheel

(ii) Wheel above 50 mm dia 50.00 177.10 Rs. One Hundred Seventy Seven and Ten Only Per Wheel Per Wheel

73.0 Providing and fixing bright finished brass single acting

spring hinges with necessary brass screws etc. complete :

(a) 150 mm 80.00 456.68 Rs. Four Hundred Fifty Six and Sixty Eight each each

(b) 125 mm Rs. Three Hundred Twenty Five and Fifty

50.00 325.57 each each

74.0 Repair to plaster of thickness 12mm to 20 mm in patches of area

2.5 sqm and under, including cutting the patch in proper shape,

raking out joints and preparing plastering the wall surface with Rs. Three Hundred Seventy Eight and Twenty One Square

white cement based polymer modified self curing mortar, Five Only meter

including disposal of rubbish, all complete as per the direction

of Engineer-In-Charge

75.0 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

(A) 15 mm nominal bore 600.00 303.94 Rs. Three Hundred Three and Ninty Four Only each each

76.0 Providing and fixing C.P. brass long nose bib cock of

approved quality conforming to IS standards and weighing

not less than 810 gms.

(A) 15 mm nominal bore 300.00 500.54 Rs. Five Hundred and Fifty Four Only each each

77.0 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to

IS:8931. Rs. Four Hundred Sixteen and Thirty Three

(A) 15 mm nominal bore 250.00 416.33 each each

78.0 Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and weighing

not less than 690 gms. Rs.Four Hundred Ninty Five and Eighty Eight

(A) 15 mm nominal bore 400.00 495.88 each each

79.0 Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to IS:8931

(A) 15 mm nominal bore 210.00 350.25 Rs. Three Hundred Fifty and Twenty Five Only each each

80.0 Providing and fixing C.P. Brass extension nipple (size

15mmx50mm) of approved make and quality as per 750.00 43.19 Rs. Forty Three and Ninteen Only each each

direction of Engineer-in-charge.

81.0 Providing and fixing C.P. brass floor mount/ wall mount

swan neck Pillar tap of approved quality conforming to

15 mm nominal bore 125.00 750.00 Rs. Seven Hundred Fifty Only Each Each

82.0 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(i) 25 mm nominal bore 30.00 372.65 Rs.Three Hundred Seventy Two and Sixty Five Each Each

(ii) 20 mm nominal bore Rs. Three Hundred Twenty Three and Twenty

30.00 323.23 Each Each

Rs. Four Hundred Twelve and Ninty Three

(iii) 32 mm nominal bore 15.00 412.93 Each Each

(iv) 40 mm nominal bore 9.00 495.11 Rs. Four Hundred Ninty Five and eleven Only Each Each

Rs. Six Hundred Forteen and Seventy Eight

(v) 50 mm nominal bore 8.00 614.78 Each Each

Rs. One Thousand Forty Three and Forty Nine

(vi) 65 mm nominal bore 5.00 1,043.49 Each Each

Rs. Fifteen Hundred Fifty Nine and Thirty

(vii) 80 mm nominal bore 5.00 1,559.32 Each Each

83.0 Providing and fixing ball valve (brass) of approved quality, High

or low pressure, with plastic floats complete

(i) 20 mm nominal bore Rs. Two Hundred Seventy Eight and Twenty

300.00 278.22 Each Each

84.0 Providing and fixing uplasticised PVC connection pipe with

(A) 45 cm length

(i) 15 mm nominal bore 180.00 59.64 Rs.Fifty Nine and Sixty Four Only Each Each

(ii) 20 mm nominal bore 120.00 71.79 Rs. Seventy One and Seventy Nine Only Each Each

85.0 Providing and laying S&S C.I. standard specials such as tees,

bends, collars, tapers, caps etc. (Heavy class):

(i) Up to 300 mm dia Rs. Thirty Nine Hundred Fifty Four and

5.00 3,954.76 quintal Per quintal

Seventy Six Only

86.0 Providing and laying machine cut, mirror polished, Italian

Marble stone flooring laid in required pattern in linear

portion of the building all complete as per architectural

drawings, with 18 mm thick stone slab laid over 20 mm

(average) thick base of cement mortar 1:4 (1 cement :

coarse sand) laid and jointed with white cement slurry @

kg/sqm, including pointing with white cement slurry

admixed with pigment to match the marble shade including

rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

(A) 18 mm thick Italian Marble stone slab, Perlato, Rosso Rs. Forty Two Hundred Sixty Six and Eighty

40.00 4,266.85 m2 One Square Meter

verona,Fire Red or Dark Emperadore etc. Five Only

87.0 Providing and laying flanged C.I. standard specials such as

Rs. Fifty Seven Hundred Thirty Four and

tees, bends, collars, tapers, caps etc., suitable for flanged 10.00 5,734.23 quintal One quintal

Twenty Three Only

jointing as per IS : 1538 :

(i) Up to 300 mm dia

88.0 Providing and laying S&S centrifugally cast (spun) iron pipes

(Class LA) conforming to IS - 1536 :

(i) 150 mm dia pipe Rs. Twelve Hundred Seventy Seven and

40.00 1,277.29 Meter One Meter

Twenty Nine Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(ii) 200 mm dia pipe Rs. Twenty One Hundred Fifty Eight and Fifty

36.00 2,158.56 Meter One Meter

(iii) 250 mm dia pipe Rs. Twenty Eight Hundred Twenty One and

30.00 2,821.35 Meter One Meter

Thirty Five Only

(iv) 300 mm dia pipe Rs. Thierty Seven Hundred Ninty Nine and

20.00 3,799.22 Meter One Meter

Twenty Two Only

89.0 Providing flanged joints to double flanged C.I./ D.I. pipes and

specials, including testing of joints :

(i) 150 mm dia pipe 20.00 240.49 Rs. Two Hundred Forty and Forty Nine Only Each Each

(ii) 200 mm dia pipe 18.00 263.90 Rs.Two Hundred Sixty Three and Ninty Only Each Each

Rs.Three Hundred Sixty Four and Twenty

(iii) 250 mm dia pipe 15.00 364.21 Each Each

(iv) 300 mm dia pipe 10.00 368.90 Rs.Three Hundred Sixty Eight and Ninty Only Each Each

90.0 Providing lead caulked joints to spun iron or C.I. pipes and

specials, including testing of joints but excluding the cost of

mm :dia pipe Rs.Four Hundred Thirty One and Zero Three

13.00 431.03 Each Each

Rs. Five Hundred Seventy Two and Eighty

(ii) 200 mm dia pipe 12.00 572.85 Each Each

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(iii) 250 mm dia pipe 10.00 716.14 Rs. Seven Hundred Sixteen and Forteen Only Each Each

(iv) 300 mm dia pipe Rs.Eight Hundred Sixty One and Forty Six

10.00 861.46 Each Each

(V) Supplying pig lead at site of work Rs. Ninteen Thousand Six Hundred Eighty

1.00 19,681.34 quintal Per quintal

One and Thirty Four Only

91.0 Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners of

required dia & length ( hold fast lugs or dash fastener shall

be paid for separately).

(A) second class teak wood Rs. Ninty Two Thousand One hundred Three One Cubic

and Eighty Seven Only Meter

92.0 Providing and fixing panelled or panelled and glazed shutters for

doors, windows and clerestory windows, fixing with butt hinges

of required size with necessary screws, excluding panelling

which will be paid for separately, all complete as per direction of

(A) Engineer-in-charge.

Second class teak wood:- 35mm thick shutter Rs. Twenty Five Hundred Ninty Three and

116.00 2,593.12 M2 One Meter Square

93.0 Dismantling W.C. Pan of all sizes including disposal of

dismantled materials i/c malba all complete as per 150.00 77.49 Rs. Seventy Seven and Forty Nine Only Each Each

directions of Engineer-in- Charge.

94.0 Hacking of CC flooring including cleaning for surface etc.

complete as per direction of the Engineer-in-Charge 9535.00 2.00 Rs. Two Only Each Each

95.0 Taking out existing wooden door shutter, repair by cutting,

painting etc. and refixing of repaired door shutters to Rs. Two Hundred Twenty Eight and

existing door frames, including replacement of hinges with 300.00 228.17 M2 One Meter Sqaure

screws, etc. as required, all complete as per the direction of

96.0 the Engineer-in-charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of

dismantled pipes within 50 metres lead as per direction of 1000.00 2.00 Rs. Two Only Each Each

Engineer- in-Charge. (a) Internal Work - Exposed on wall

97.0 Cleaning of under ground sump, Over Head R.C.C. Tank

(independent staging) including disposal of slit and rubbish, 5000.00 49.91

Rs. Forty Nine and Ninty One Only M2 One Meter Sqaure

all as per direction of Engineer-in-Charge. The cleaning shall

consist following operations:

(i) Tank shall be emptied of water by pumping & bottom shall

be cleaned of slit and other deposits.

(ii) Entire surface area of the sump shall then scrubbed

thoroughly with wire brush etc. and pressure washed with

(iii) Chlorination of RCC internal surface by liquid chlorine.

(iv) The treated surface shall be dried using air jetting and all

loose particles shall be removal from the surface.

(v) Finally the surface shall be treated with ultraviolet radiation

etc. as per direction of Engineer-in-Charge

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

98.0 Providing and fixing double scaffolding system (cup lock

type) on the exterior side, up to seven story height made

with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal

& vertical tubes joining with cup & lock system with M.S.

tubes, M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required

duration as approved and removing it there after .The

scaffolding system shall be stiffened with bracings, runners, 1200.00 199.50 Rs. One Hundred Ninty Nine and Fifty Only M2 One Meter Sqaure

connection with the building etc wherever required for

inspection of work at required locations with essential

safety features for the workmen etc. complete as per

directions and approval of Engineer in-charge .The

elevational area of the scaffolding shall be measured for

payment purpose .The payment will be made once

irrespective of duration of scaffolding. Note : - This item to

be used for maintenance work judicially, necessary

99.0 Constructing brick masonry manhole in cement mortar 1:4 (

1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3

mix (1 cement : 1.5 coarse sand (zone III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominal size), inside plastering 12 mm

thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20 mm nominal size) finished

with a floating coat of neat cement complete as per standard

design : 19.4.1 Inside size 90x80 cm and 45 cm deep

including C.I. cover with frame (light duty) 455x610 mm

internal dimensions, total weight of cover and frame to be

not less than 38 kg (weight of cover 23 kg and weight of

(A) With common burnt clay F.P.S. (non modular) bricks of class Rs. Eighty One Hundred Eighty and Ninty

designation 7.5 9.00 8,180.97 Each Each

100.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge. Internal work - Exposed on wall

(A) 15 mm nominal outer dia Pipes One Running

70.00 179.13 Rs. One Hundred Seventy Nine and Thirteen Only Rmt

(B) 20 mm nominal outer dia Pipes One Running

75.00 227.57 Rs. Two Hundred Twenty Seven and Fifty Seven Rmt

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(C ) 25 mm nominal outer dia Pipes One Running

99.00 285.99 Rs. Two Hundred Eighty Five and Ninty Nine Only Rmt

(D) 32 mm nominal outer dia Pipes One Running

80.00 350.67 Rs. Three Hundred Fifty and Sixty Seven Only Rmt

(E) 40 mm nominal outer dia Pipes One Running

95.00 472.05 Rs.Four Hundred Seventy Two and Zero Five Only Rmt

(F) 50 mm nominal outer dia Pipes One Running

110.00 648.90 Rs. Six Hundred Forty Eight and Ninty Only Rmt

101.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of

Engineer in Charge.Concealed work, including cutting chases

and making good the walls etc

(A) 15 mm nominal outer dia Pipes One Running

75.00 308.81 Rs. Three Hundred Eight and Eighty One Only Rmt

(B) 20 mm nominal outer dia Pipes One Running

85.00 359.63 Rs. Three Hundred Fifty Nine and Sixty Three Only Rmt

(C ) 25 mm nominal outer dia Pipes One Running

96.00 438.24 Rs. Four Hundred Thirty Eight and Twenty Four OnlyRmt

(D) 32 mm nominal outer dia Pipes One Running

95.00 498.93 Rs. Four Hundred Ninty Eight and Ninty Three Only Rmt

102.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge. External

(A) 15 mm nominal outer dia Pipes One Running

200.00 154.95 Rs. One Hundred Fifty Four and Ninty Five Only Rmt

(B) 20 mm nominal outer dia Pipes One Running

300.00 192.68 Rs. One Hundred Ninty Two and Sixty Eight Only Rmt

(C ) 25 mm nominal outer dia Pipes One Running

330.00 259.46 Rs.Two Hundred Fifty Nine and Forty Six Only Rmt

(D) 32 mm nominal outer dia Pipes One Running

300.00 304.54 Rs. Three Hundred Four and Fifty Four Only Rmt

(E) 40 mm nominal outer dia Pipes One Running

210.00 391.44 Rs. Three Hundred Ninty One and Forty Four Only Rmt

(F) 50 mm nominal outer dia Pipes One Running

150.00 568.30 Rs. Five Hundred Sixty Eight and Thirty Only Rmt

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(G) 65 mm nominal dia pipes One Running

160.00 1,103.83 Rs. Eleven Hundred Three and Eighty Three Only Rmt

(H) 80 mm nominal dia Pipes One Running

180.00 1,393.28 Rs. Thirteen Hundred Ninty Three and Twenty EightRmt

(I) 100 mm nominal dia Pipes One Running

190.00 1,968.23 Rs. Ninteen Hundred Sixty Eight and Twenty Three Only

(J) 150 mm nominal dia Pipes One Running

150.00 4,109.88 Rs. Forty One Hundred Nine and Eighty Eight Only Rmt

103.0 Making connection of G.I. distribution branch with G.I. main

of following sizes by providing and fixing tee, including

cutting and threading the pipe etc. complete

(i) 25 to 40 mm nominal bore One Running

60.00 529.97 Rs. Five Hundred Twenty Nine and Ninty Seven OnlyRmt

(ii) 50 to 80 mm nominal bore One Running

30.00 1,059.59 Rs. One Thousand Fifty Nine and Fifty Nine only Rmt

104.0 Boring with 100 mm diameter casing pipe for hand pump /

tubewell, in all soils except ordinary hard rocks requiring

blasting, including removing the casing pipe after the hand

pump / tube well is lowered and tested :

(i) Beyond 12 m and up to 18 m depth Rs. Five Hundred Ninty Three and Fifteen One Running

105.0 Providing and placing in position filters of 40 mm diameter Rs. Five Hundred Sixty Nine and Twenty One Running

G.I. pipe with brass strainer of approved quality. Eight Only Meter

106.0 Providing and fixing to filter and lowering to proper levels Rs. Three Hundred Forty Nine and Eighty Six One Running

40 mm G.I. pipe for tube well including cleaning and priming Only Meter

107.0 the tube well.

Providing and fixing C.I. double acting air valve of approved

quality with bolts, nuts, rubber insertions etc. complete (The

tail pieces, tapers etc if required will be paid separately) :

(i) 80 mm dia Rs. Forty Three Hundred Seventy Eight and

2.00 4,378.82 Each Each

Eighty Two Only

(ii) 100 mm dia Rs. Fifty Seven Hundred Forty Nine and

2.00 5,749.87 Each Each

Eighty Seven Only

108.0 Providing and fixing enclosed type water meter (bulk type)

conforming to IS : 2373 and tested by Municipal Board

complete with bolts, nuts, rubber insertions etc. (The tail

pieces if required will be paid separately) :

(i) 150 mm dia nominal bore 2.00 5,150.15 Rs. Fifty One Hundred Fifty and Fifteen Only Each Each

(ii) 200 mm dia nominal bore 1.00 5,656.11 Rs.Fifty Six Hundred and Eleven Only Each Each

109.0 Painting G.I. pipes and fittings with two coats of anti-

corrosive bitumastic paint of approved quality :

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(i) 80 mm diameter pipe One Running

1000.00 25.48 Rs. Twenty Five and Forty Eight Only Rmt

110.0 Constructing masonry Chamber 120x120x100 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

for sluice valve, with C.I. surface box 100 mm top diameter,

160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) , i/c

necessary excavation,foundation concrete 1:5:10 (1 cement :

5 fine sand : 10 graded stone aggregate 40 mm nominal size)

and inside plastering with cement mortar 1:3 (1 cement :

coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

(i) With common burnt clay F.P.S.(non modular) bricks of class Rs. Seventeen Thousand Seventy Two and

6.00 17,072.20 Each Each

designation 7.5 Twenty Only

111.0 Providing and fixing Polyethelene-Aluminium-Polyethelene

PE-AL-PE Composite Pressure Pipes conforming to IS -

15450, U.V. stabilized with carbon black having thermal

stability for hot & cold water supply, capable to withstand

temperature up to 80°C, including all special fittings of

composite material (engineering plastic blend and brass

inserts wherever required) e.g. elbows, tees, reducers,

couplers & connectors etc., with clamps at 1.00 metre

spacing. This includes testing of joints complete as per

direction of the Engineer-in- charge. INTERNAL WORK -

(i) 3240 (40 mm OD) pipe Rs. Five Hundred Thirty Two and Ninty Five One Running

(ii) 40 50(50 mm OD) pipe One Running

120.00 630.32 Rs. Six Hundred Thirty and Thirty Two Only Rmt

112.0 Providing and placing on terrace (at all floor levels)

Rotational Moulded Polyethylene Water Storage Tanks IS :

12701 Cylindrical Vertical Tank with Lid with multilayred

antigerms properties and making necessary holes for inlet,

outlet and overflow pipes with fittings and the base support

for tank etc all complete as directed by E-I-C.

(A) Water tank ####### 9.00 Rs. Nine Only Litre per Liter

113.0 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel

plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required :

(A) Kitchen sink with drain board

Rs. Forty Two Hundred Five and Ninty Two

(i) 510x1040 mm bowl depth 250 mm 5.00 4,205.92 Each Each

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(ii) 510x1040 mm bowl depth 200 mm Rs. Forty Three Hundred Ninty Three and

4.00 4,393.20 Each Each

(B) Kitchen sink without drain board

(i) 610x510 mm bowl depth 200 mm Rs. Twenty Nine Hundred Ninty Two and

15.00 2,992.08 Each Each

Zero Eight Only

Rs. Twenty Three Hundred Thirty Six and

(ii) 610x460 mm bowl depth 200 mm 20.00 2,336.50 Each Each

Thousand Fifty Five and Fifty Two

(iii) 470x420 mm bowl depth 178 mm 22.00 2,055.52 Each Each

114.0 Providing and fixing white vitreous china laboratory sink

with C.I. brackets, C.P. brass chain with rubber plug, 40 mm

C.P brass waste and 40mm C.P. brass trap with necessary

C.P. brass unions complete, including painting of fittings and

brackets, cutting and making good the wall wherever

(i) Size 600x450x200 mm 5.00 3,927.60 Rs. Thirty Nine Hundred Twenty Seven and Sixty Only

115.0 Providing and fixing wash basin with C.I. brackets, 15 mm

dia CP Brass single hole basin mixer of approved quality and

make, including painting of fittings and brackets, cutting and

making good the walls wherever required:-

(i) White Vitreous China Wash basin size 550x400 mm with a

25.00 2,421.34 Rs. Twenty Four Hundred Twenty One and Thirty Four

15 mm CP Brass single hole basin mixer

116.0 Providing and fixing P.V.C. low level flushing cistern with

manually controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete.

(A) 10 litre capacity - White

(Flushing Cistern P.V.C. 10 litre capacity (low level) (White) 65.00 716.14 Rs.Seven Hundred Sixteen and Forteen Only Each Each

(with fittings, accessories and flush pipe) :

117.0 Providing and fixing PTMT towel rail complete with brackets

fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

(A) 600 mm long towel rail with total length of 645 mm, width

120.00 420.25 Rs.Four Hundred Twenty and Twenty Five Only Each Each

78 mm and effective height of 88 mm, weighing not less than

190 gms. & fixing White/coloured vitreous china water

118.0 Providing

closet squatting pan (Indian type) along with "S" or "P" trap

including dismantling of old WC seat and "S" or "P" trap at

site complete with all operations including all necessary

materials, labour and disposal of dismantled material i/c

malba, all complete as per the direction of Engineer-in

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(A) Orissa pattern W.C Pan of size 580x440 mm 40.00 2,695.46 Rs. Twenty Six Hundred Ninty Five and Forty Six Only

(B) Long pattern W.C Pan of size 580x440 mm 25.00 2,073.96 Rs. Two Thousand Seventy Three and Ninty Six OnlyEach Each

119.0 Providing and fixing white vitreous china pedestal type

water closet (European type W.C. pan) with seat and lid,

litre low level white P.V.C. flushing cistern, including flush

pipe, with manually controlled device (handle lever),

conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and

floors wherever required :

(A) W.C. pan with ISI marked white solid plastic seat and lid 40.00 3,878.39 Rs.Thirty Eight Hundred Seventy Eight and Thirty Nine

120.0 Supplying of Name plates, Designation Plate / Notice Board

etc. made of superior quality 3mm thick acrylic material One Square

milky sheet with blue vinayle computerized letter writing in 30,000.00 3.00 Rs. Three Only Sq.inch

different sizes including cost of adhesive labour and material

etc.complete as directed by Engineer-in-charge.

121.0 Repairing / Rewinding of electric driven motors of required

HP and installation of the same in the proper place with cost

of rewinding, repairing of body, bush etc and other

accessories of motors etc complete as directed.

(A) 0.5HP motor 12.00 950.00 Rs. Nine Hundred Fifty Only Each Each

(B) 1.0 HP motor 8.00 1,150.00 Rs. Eleven Hundred Fifty Only Each Each

(C ) 1.5 HP motor 7.00 1,380.00 Rs. Thirteen Hundred Eighty Only Each Each

(D) 2.0 HP Motor 6.00 1,570.00 Rs. Fifteen Hundred Seventy Only Each Each

(E) 3.0 HP Motor 6.00 2,150.00 Rs. Twenty One Hundred Fifty Only Each Each

(F) 5.0 HP Moter 4.00 3,500.00 Rs. Thirty Five Hundred Only Each Each

(G) 25 HP Motor 2.00 6,800.00 Rs. Sixty Eight Hundred only Each Each

(H) 1 HP Pressure Booster Pump 4.00 2,400.00 Rs. Twenty Four Hundred Only Each Each

(I) Oiling/Greasing/servicing/ including replacement of

150.00 150.00 Rs. One Hundred Fifty Only Each Each

Bearing/Bush/ Capacitor/ MCB etc as when required etc.

(j) Visting of technician (Semi Skilled) once in a week 104.00 632.00 Rs. Six Hundred Thirty Two Only Day Per Day

122.0 Trimming the branches of tree within and surrounding area

of Buildings trimming should be done upto 4.00 mtr. height

from ground level. It is to be ensured that no branches of

trees remain below 4.00 mtr height from ground,trimmed

material is to be removed outside the area by tractor/trolley 1095.00 228.00 Rs. Two Hundred Twenty Eight Only One tree One Tree

upto lead 15.00km as directed by Engineer-in-charge. The

rate are inclusive all tools, plants, with male mazdoor &

tractor trolly with driver including operation and

maintenance etc.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

123.0 Painting road surface marking with adequate nos of coats to

give uniform finish with ready mixed road marking paint

conforming to IS : 164, on bituminous surface in

white/yellow shade, including cleaning the surface of all

dirt, scales, oil, grease and foreign material etc. complete

(A) Old work (One or more coats) 1200.00 110.32 Rs. One Hundred Ten and Thirty Two Only m2 One Square Meter

124.0 Leakage repair of existing water supply lines by carrying

excavation and refilling of trenches dewatering if any,

including all the jointing material etc. all material and labour

complete required for leakage repairs including cost of

M.S.clamp,Joints, M.S. fitting with required pipe fittings all

complete as diredted by EIC.

(A) 50 mm to 150 mm dia 45.00 2,850.00 Rs. Twenty Eight Hundred Fifty Only Nos One Number

(B) 200 mm to 300 mm dia 35.00 4,774.00 Rs. Forty Seven Hundred Seventy Four Only Nos One Number

125.0 Providing and fixing Glass mossaic tiles on finished plain

wall surface of size 20 mm x 20 mm x 4 mm in all colour, Rs. Twenty Two Hundred Ninty Seven and One Square

design , fixing in approved design. The glass mosaic tiles 20.00 2,297.75 m2

Seventy Five Only meter

shall be fixed on the wall surface with the help of approved

adhesive applied at the rate of 2.5 kg per sqm and grouting

126.0 Providing and erecting 2.00 metre high temporary

barricading at site as per drawing/ direction of Engineer in-

Charge which includes writing and painting, arrangement

for traffic diversion such as traffic signals during

construction at site for day and night, glow lamps, reflective

signs, marking, flags, caution tape as directed by the

Engineer-in-Charge. The barricading provided shall be

retained in position at site continuously i/c shifting of

barricading from one location to another location as many 80.00 1,979.18 Rs. Ninteen Hundred Seventy Nine and Eighteen OnlyM One Meter

times as required during the execution of the entire work till

its completion. Rate include its maintenance for damages,

painting, all incidentals, labour materials, equipments and

works required to execute the job. The barricading shall not

be removed without prior approval of Engineer-in-Charge. (

(Note :- One time payment shall be made for providing

barricading from start of work till completion of work i/c

shifting. The barricading provided shall remain to be the

Taking out ofexisting

the contractor on completion

kerb stones of all typesoffrom

central verge, including removal of mortar etc., disposal of

unserviceable material to the dumping ground, for which 1000.00 22.68 Rs. Twenty Two and Sixty Eight Only M One Meter

payment shall be made separately and stacking of

serviceable material within 50 metre lead as per direction of

Engineer-in-Charge.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

128.0 Taking out existing CC interlocking paver blocks from

footpath/ central verge, including removal of rubbish etc.,

disposal of unserviceable material to the dumping ground, 1000.00 76.06 Rs. Seventy Six and Zero Six Only m2 Sq.Meter

for which payment shall be made separately and stacking of

serviceable material within 50 metre lead as per direction of

Engineer-in-Charge.

129.0 Providing and placing in position 100 mm thick factory

made machine batched & machine mixed Precast RCC

Rectangular Covers on drains of footpath of various sizes, of

M-25 grade cement concrete for RCC work, including cost of

centering, shuttering, reinforcement of 8 mm dia TMT bars

of Fe 500 grade @ maximum 100mm c/c on both ways , neat

45.00 1,832.01 Rs. Eighteen Hundred Thirty Two and Zero One Onlym2 One Square Meter

cement punning on finished surface, properly encased on all

edges with 1.6 mm thick , 100 mm wide MS sheet duly

painted over priming coat , reinforcement to be welded at

edges with MS sheet and providing 2 Nos. 12 mm dia bar for

hooks etc i/c cost of cartage, all leads & lift, handling at site

etc. all complete as per direction of Engineer-in-Charge.

130.0 Providing and fixing aluminium tower bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS

: 1868 ) transparent or dyed to required colour or shade,

with necessary screws etc. complete :

(A) 300x10 mm 100.00 82.36 Rs. Eighty Two and Thirty Six Only Each Each

(B) 200x10 mm 125.00 73.08 Rs. Seventy Three and Zero Eight Only Each Each

(C ) 100x10 mm 160.00 41.06 Rs. Forty One and Zero Six Only Each Each

131.0 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) decorative type, core of

block board construction with frame of 1st class hard wood

and well matched teak three ply veneering with vertical

grains or cross bands and face veneers on both faces of

(A) 25 mm thick (for cupboard) including ISI marked nickel Rs. Seventeen Hundred Eighty Five and Sixty

40.00 1,785.65 m2 One Sq Mtr

plated bright finished M.S. Piano hinges IS : 3818 marked Five Only

30 mmnecessary screws ISI marked Stainless Steel butt hinges

thick including Rs. Ninteen Hundred Seventy Two and Ninty

95.00 1,972.95 m2 One Sq Mtr

with necessary screws Five Only

132.0 Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having brand

logo with ISi, IS : 3564, embossed on the body, door weight Rs. Five Hundred Ninty Nine and Forty One

50.00 599.41 Each Each

upto 36 kg to 80 kg and door width from 701 mm to 1000 Only

mm), with double speed adjustment with necessary

accessories and screws etc. complete

133.0 Providing and fixing chromium plated brass night latch of

35.00 703.36 Rs. Seven Hundred Three and Thirty Six Only Each Each

approved quality including necessary screws etc.complete.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

134.0 38 mm thick wood block flooring of first class teak wood laid

over 25 mm thick leveling layer of cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 10 mm

nominal size) to be paid separately, coated with a thin layer Rs. Seventy Three Hundred Eighty and

48.00 7,380.38 M2 One Sq.Meter

of hot bitumen penetration 80/25 (blown type) @ 2.45 kg Thierty Eight Only

per sqm, including fixing blocks in position after dipping in

hot bitumen (blown type) up to half depth, planed, levelled

smooth and finished complete.

135.0 25 mm wooden planking, tongued and grooved in flooring,

including fixing with iron screws complete with :

(i) Second class teak wood Rs. Twenty Nine Hundred Thirty One and

64.00 2,931.57 M2 One Sq.Meter

Fifty Seven Only

136.0 Spraying antitermite tretment with termiseal green to the

surrounding area of building including compound wall by

using W.H.O enlisted chemical by service operator manually

operating by spray pump for the rodent control also 96.00 1,500.00 Rs. Fifteen Hundred Only Each Each

using/kept imported gum pad and rat traps inside bunglows

etc. completed as per direction of Engineer In-chrage.

137.0 Removing dry or oil bound distemper, water proofing

cement paint and the like by scrapping, sand papering and 6150.00 14.60 Rs. Forteen and Sixty only Sqm One Meter Square

preparing the surface smooth including necessary repairs to

138.0 scratches etc.

Finishing & complete.the wall surface with two coats of

acrylic based 2 mm cement putty of approved make & brand

including and over the one of cement primer on new / old 6150.00 86.70 Rs. Eighty Six and Seventy Only m2 One Meter Square

surface etc. complete all labour and material as directed

bythe Engineer-In-Charge.

139.0 Wall painting with plastic emulsion paint of approved brand

and manufacture to give an even shade:

(A) One or more coats on old work 8100.00 63.60 Rs. Sixty Three and Sixty Only m2 One Meter Square

140.0 Painting with silicon & acrylic emulsion based water

thinnable sealer of approved brand and manufacture on wet

or patchy portion of plastered surfaces :

(i) One or more coat 2700.00 58.45 Rs. Fifty Eight and Forty Five Only m2 One Meter Square

141.0 Applying priming coat:

(i) With ready mixed pink or Grey primer of approved brand

3000.00 43.02 Rs. Forty Three and Zero Two Only m2 One Meter Square

and manufacture on wood work (hard and soft wood)

(ii) With ready mixed red oxide zinc chromate primer of

2250.00 38.85 Rs. Thirty Eight and Eighty Five Only m2 One Meter Square

approved brand and manufacture on steel galvanised iron/

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(iii) With ready mixed aluminium primer of approved brand and

1200.00 44.07 Rs. Forty Four and Zero Four Only m2 One Meter Square

manufacture on resinous wood and plywood

142.0 French spirit polishing :

(a) Two or more coats on new works including a coat of wood 323.00 257.81 Rs. Two Hundred Fifty Seven and Eighty One Only m2 One Meter Square

Varnishing with varnish of approved brand and manufacture

Two or more coats of glue sizing with copal varnish over an

600.00 138.18 Rs. One Hundred Thirty Eight and Eighteen Only m2 One Meter Square

under coat of flatting varnish

144.0 Distempering with dry distemper of approved brand and

manufacture (one or more coats) and of required shade on

old work to give an even shade. :

(a) Old work (One or more coat ) 28800.00 39.76 Rs. Thirty Nine and Seventy Six Only m2 One Meter Square

145.0 Providing 10 mm thick plaster of Paris (gypsum anhydrous)

ceiling up to a height of 5 m above floor level, over first class

kail wood strips 25x6 mm with 10 mm gap in between and

reinforced with rabbit wire mesh fixed to wooden frame

(frame work to be paid separately):

(a) Flat surfaces 80.00 994.88 Rs. Nine Hundred Ninty Four and Ninty Eight Only m2 One Meter Square

Rs.Eleven Hundred Ninty Five and Sixty Four

(b) Curved surfaces 36.00 1,195.64 m2 One Meter Square

146.0 Finishing with Deluxe Multi surface paint system for

interiors and exteriors using Primer as per manufacturers

(a) specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over

8000.00 111.27 Rs. One Hundred Eleven and Twenty Seven Only m2 One Meter Square

and including one coat of Special primer applied @ 0.75 ltr

147.0 /10 sqmstone grit plaster on exterior walls height upto

metre above ground level, in two layers, under layer 12 mm

cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the

under layer with scratching tool, applying cement slurry on

the under layer @ 2 Kg of cement per square metre,top layer

15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : Rs. Six Hundred Eighty Nine and Eighty Two

1000.00 689.82 m2 One Meter Square

2 stone chipping 10 mm nominal size), in panels with groove Only

all around as per approved pattern, including scrubbing and

washing the top layer with brushes and water to expose the

stone chippings ,complete as per specification and direction

of Engineer-in- charge (payment for providing grooves shall

be made separately).

148.0 Forming groove of uniform size in the top layer of washed

stone grit plaster as per approved pattern using wooden

battens, nailed to the under layer, including removal of

wooden battens, repair to the edges of panels and finishing

the groove complete as per

specifications and direction of the Engineer-in-charge :

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(i) 15 mm wide and 15 mm deep groove 1000.00 43.75 Rs. Forty Three and Seventy Five Only m One Meter

149.0 Applying one coat of water thinnable cement primer of

approved brand and manufacture on wall surface :

(i) Water thinnable cement primer 2400.00 45.12 Rs. Forty Five and Twelve Only m2 One Meter Square

150.0 6 mm plaster on cement concrete or reinforced cement

concrete work with white cement based polymer modified Rs. One Hundred Fifty Two and Twenty Five

750.00 152.25 m2 One Meter Square

self curing mortar of approved make as per the direction of Only

151.0 Engineer-In-Charge.

Providing corrugated G.S. sheet roofing including vertical /

curved surface fixed with polymer coated J or L hooks, bolts

and nuts 8 mm diameter with bitumen and G.I. limpet

washers or with G.I. limpet washers filled with white lead,

including a coat of approved steel primer and two coats of

approved paint on overlapping of sheets complete (up to any

pitch in horizontal/ vertical or curved surfaces),excluding

the cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

(i) 1.00 mm thick with zinc coating not less than 275 gm/m² Rs. Nine Hundred Twenty Four and Twenty

192.00 924.25 m2 One Meter Square

152.0 Constructing masonry Chamber 90x90x100 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

for sluice valve, with C.I. surface box 100 mm top diameter,

160 mm bottom diameter and 180 mm deep (inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size ), i/c

necessary excavation, foundation concrete 1:5:10 (1 cement

: 5 fine sand : 10 graded stone aggregate 40 mm nominal size

) and inside plastering with cement mortar 1:3 (1 cement :

coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

(A) With common burnt clay F.P.S.(non modular) bricks of class Rs. Twelve Thousand Three Hundred Four

2.00 12,304.53 One Manhole One Manhole

designation 7.5 and Fifty Three Only

153.0 Dismantling of old S.W. pipes including breaking of joints

and bed concrete stacking of useful materials near the site

within 50 m lead and disposal of unserviceable materials

(i) into municipal

diameter 150.00 51.35 Rs. Fifty One and Thirty Five Only M One Meter

(ii) 150 mm diameter 100.00 56.77 Rs. Fifty Six and Seventy Seven Only M One Meter

154.0 Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

Rs. Five Hundred Sixty Seven and Eighty One

(i) 250 mm dia. R.C.C. pipe 120.00 567.81 M one meter

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

Rs. Six Hundred Thirty One and Forty Four

(ii) 300 mm dia. R.C.C. pipe 90.00 631.44 M one meter

Rs. One Thousand Thirty Seven and Zero Nine

(iii) 450 mm dia. R.C.C. pipe 60.00 1,037.09 M one meter

(iv) 600 mm dia. R.C.C. pipe Rs. Forteen Hundred Sixty Eight and Sixty

30.00 1,468.67 M one meter

155.0 Replacement of M.S. foot rests in manholes including

dismantling concrete blocks and fixing with 20x20x10 cm

cement concrete blocks 1:3:6 (1 cement : 3 coarse sand :

graded stone aggregate 20 mm nominal size):

Rs. Three Hundred Ninty Five and Twenty

(i) With 20x20 mm square bar 350.00 395.22 Each Each

Two OnlyHundredSixty Six and Twenty Eight

(ii) With 20 mm diameter round bar 300.00 366.28 Each Each

156.0 Constructing brick masonry circular manhole 1.52 m

internal dia at bottom and 0.56 m dia at top in cement

mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster

12 mm thick with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat cement,

foundation concrete 1:3:6 (1 cement : 3 coarse sand :

graded stone aggregate 40 mm nominal size) and making

necessary channel in cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement, all complete as

(A) 2.30 m deep with SFRC Cover and frame (heavy duty HD

grade designation) 560 mm internal diameter conforming to

I.S. 12592, total weight of cover and frame to be not less

than 182 kg. fixed in cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregate 20 mm nominal size)

including centering, shuttering all complete. (Excavation,

foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) :

(i) With common burnt clay F.P.S. (non modular) bricks of class Rs.Thirty Four Thousand Four Hundred

1.00 34,435.10 Each Each

designation 7.5 Thirty Five and Ten Only

(ii) With Sewer bricks conforming IS : 4885 Rs.Thirty Three Thiusand Four Hundred

1.00 33,479.78 Each Each

Seventy Nine and Seventy Eight Only

(B) Extra depth for circular type manhole 1.52 m internal dia (at

bottom) beyond 2.30 m :

(i) With common burnt clay F.P.S. (non modular) bricks of class Rs. Forteen Thousand Seven Hundred

2.00 14,772.38 Meter One Running Meter

designation 7.5 Seventy Two and Thirty Eight Only

Rs. Forteen Thiusand Eighty and Forty Three

(ii) With Sewer bricks conforming IS : 4885 2.00 14,080.43 Meter One Running Meter

157.0 Providing and laying Non Pressure NP-3 class (Medium

duty) R.C.C. pipes including collars/spigot jointed with stiff

mixture of cement mortar in the proportion of 1:2 (1 cement

: 2 fine sand) including testing of joints etc. complete

(i) 450 mm dia RCC pipes. Rs. One Thousand Six Hundred Sixty Nine and

30.00 1,669.85 Meter One Running Meter

Eighty Five Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(ii) 600 mm dia RCC pipes. Rs. Two Thousand One Hundred Thirty Six

30.00 2,136.09 Meter One Running Meter

and Zero Nine Only

158.0 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300 x 300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design:

(A) 100x100 mm size P type

(i) With common burnt clay F.P.S. (non modular) bricks of class Rs. Seventeen Hundred Seventeen and Forty

30.00 1,717.49 Each Each

designation 7.5 Nine Only

(ii) With Sewer bricks conforming to IS : 4885 30.00 1,685.36 Rs. Sixteen Hundred and Thirty Six Only Each Each

(B) 150 x 100 mm size P type

(i) With common burnt clay F.P.S. (non modular) bricks of class Rs. Seventeen Hundred Thirty Two and Zero

50.00 1,732.08 Each Each

designation 7.5 Eight Only

Rs.Sixteen Hundred Ninty Nine and Ninty

(ii) With Sewer bricks conforming to IS : 4885 50.00 1,699.92 Each Each

159.0 Constructing masonry Chamber 60x60x75 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

for sluice valve, with C.I. surface box 100mm top diameter,

160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20mm nominal size ) , i/c

necessary excavation, foundation concrete 1:5:10 (1 cement

: 5 fine sand : 10 graded stone aggregate 40 mm nominal

size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick, finished with a floating

coat of neat cement complete as per standard design :

(a) With common burnt clay F.P.S.(non modular) bricks of class Rs. Seven Thousand Seventy One and Seventy

10.00 7,071.75 Each Each

designation 7.5 Five Only

160.0 Providing and fixing in position pre-cast R.C.C. manhole

cover and frame of required shape and approved quality

Rs. Eight Hundred Seventy Eight and Sixty

(A) Rectangular shape 600x450 mm internal dimensions 20.00 878.68 Each Each

(i) Square shape 450 mm internal dimension 20.00 880.18 Rs. Eight Hundred Eighty and Eighteen Only Each Each

Rs. Seven Hundred Thirty Nine and Sixty Six

(ii) Circular shape 500 mm internal diamete 15.00 739.66 Each Each

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

161.0 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc.

(i) For pipes 100 to 250 mm diameter 80.00 478.59 Rs. Four Hundred Seventy Eight and Fifty Nine OnlyEach Each

(ii) For pipes 250 to 300 mm diameter 30.00 550.13 Rs. Five hundred Fifty and Thirteen Only Each Each

Rs.Seven Hundred Ninty Four and Twenty Six

(iii) For pipes 350 to 450 mm diameter 5.00 794.26 Each Each

162.0 Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

(A) One or more coats on old work One Square

7897.00 60.59 Rs. Sixty and Fifty Nine Only m2

163.0 Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1

cement : 6 coarse sand : 12 graded stone aggregate 20 mm

nominal size) upto plinth level with :

(A) Cement mortar 1:6 (1 cement : 6 coarse sand) Rs. Four Thousand Six Hundred Fifty Seven

30.00 4,657.42 m3 One Cubic meter

and Forty Two Only

164.0 Providing and fixing 8 mm dia S.S Jet with flexible tube upto

1 metre long with CP brass triangular plate to Eureopean 230.00 209.55 Rs. Two Hundred Nine and Fifty Five Only Each Each

type W.C. of quality and make as approved by Engineer - in -

165.0 Maintaining water supply pipe lines and attending plumbing

work by providing and engaging one skilled plumber with

helper per day for eight hours shift with all necessary

equipment such as pipe wrenches, tape, hammer, chisel etc

having full knowledge of plumbing work as directed by

engineer in charge.

(A) In Gopalpuri colony working in 2 shifts and genral shift

(07:00 to 15:00 Hrs consider 2 plumber and 15:00 to 23:00 2172.00 1,004.00 Rs. One Thousand Four Only Man Man days

Hrs 1 plumber (07:00 Hrs to 23:00 Hrs)

166.0 Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of approved

shape including providing & fixing white vitreous china Rs.Ninty One Hundred Twenty Five and Fifty

cistern with dual flush fitting, of flushing capacity 3 litre/ 6 18.00 9,125.59 Each Each

litre (adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc complete.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

167.0 Providing and fixing bright finished brass hasp and staple

(safety type)with necessary screws etc. complete :

(i) 150 mm 100.00 83.02 Rs. Eighty Three and Zero Two Only Each Each

(ii) 115 mm 120.00 75.22 Rs.Seventy Five and Twenty Two Only Each Each

(iii) 90 mm 150.00 66.33 Rs. Sixty Six and Thirty Three Only Each Each

168.0 Providing and fixing handle (SS 304, premimum quality)

with necessary screws etc. complete:

(i) 150 mm 200.00 158.55 Rs. One Hundred Fifty Eight and Fifty Five Only Pair One Pair

(ii) 125 mm 125.00 139.44 Rs.One Hundred Thirty Nine and Forty Four Only Pair One Pair

(iii) 100 mm 100.00 125.41 Rs. One Hundred Twenty Five and Forty One Only Pair One Pair

169.0 Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means,

including loading, transporting, unloading to approved 2200.00 153.55 Rs. One Hundred Fifty Three and Fifty Five Only M3 Cubic Meter

municipal dumping ground or as approved by Engineer-in-

charge, beyond 50 m initial lead, for all leads including all

lifts involved.

170.0 Providing and fixing coloured FRP sheet 2.00 mm thick of

approved "A" class first quality with fixing top of structure

steel frame work (20 kg/m2) for FRP shed and chjja etc up 477.00 1,603.00 Rs. One Thousand Six Hundred Three Only M2 One Meter Square

to 12 m height with necessary nuts, bolts with washers

applying a priming coat etc. complete as directed by

Engineer in charge.

171.0 Demolishing cement concrete manually/ by mechanical

means including disposal of material within 50 metres lead

as per direction of Engineer - in - charge.

Rs. Forteen Hundred Four and Ninety Seven

(i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design 144.00 1,404.97 M3 One Cubic Meter

(ii) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design 108.00 867.72 Rs. Eight Hundred Sixty Seven and Seventy Two OnlyM3 One Cubic Meter

172.0 Dismantling roofing including ridges, hips, valleys and

gutters etc., and stacking the material within 50 metres lead

G.S. 200.00 95.20 Rs.Ninety Five and Twenty Only M2 One Meter Square

(ii) Asbestos sheet 350.00 44.63 Rs.Forty Four and Sixty Three Only M2 One Meter Square

173.0 Providing and fixing powder coated telescopic drawer

channels 300 mm long with necessary screws etc. complete 250.00 248.54 Rs. Two Hundred Forty Eight and Fifty Four Only Set One Set

as per directions of Engineer- in-charge.

174.0 Dismantling barbed wire or flexible wire rope in fencing

including making rolls and stacking within 50 metres lead. 1600.00 21.25 Rs.Twenty One and Twenty Five Only kg Per kg

175.0 Dismantling cement asbestos or other hard board ceiling or

partition walls including stacking of serviceable materials

1200.00 32.55 Rs. Thirty Two and Fifty Five Only M2 One Meter Sqare

and disposal of unserviceable materials within 50 metres

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

176.0 Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical

means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-charge:

(a) upto 150 mm dia 300.00 238.49 Rs. Two Thirty Eight and Forty Nine Only Meter One Running Meter

(b) Above 150 mm dia up to 300 mm dia 200.00 313.71 Rs. Three Hundred Thirteen and Seventy One Only Meter One Running Meter

177.0 Dismantling of flushing cistern of all types

(C.I./PVC/Vitrious China) including stacking of useful

200.00 521.22 Rs. Five Hundred Twenty One and Twenty Two OnlyEach Each

materials near the site and disposal of unserviceable

materials within 50 metres lead.

178.0 Dismantling old plaster or skirting raking out joints and

cleaning the surface for plaster including disposal of rubbish 31.54 Rs.Thirty One and Fifty Four Only M2

2744.00 One Meter Sqare

to the dumping ground within 50 metres lead.

179.0 Dismantling of road gully chamber of various sizes including

C.I. grating with frame including stacking of useful materials

near the site and disposal of unserviceable materials within 100.00 554.16 Rs. Five Hundred Fifty Four and Sixteen Only Each Each

50 metres lead including refilling the excavated gap

180.0 Dismantling manually/ by mechanical means including

stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge :

(a) bituminous road 200.00 247.56 Rs. Two Hundred Forty Seven and Fifty Six Only M2 One Square Meter

181.0 Providing and fixing aluminum U beading of required size to

Pre laminated/flush door shutter, including fixing etc. Rs. Three Hundred Seventy One and Twenty

50.00 371.21 kg per kg

complete as per direction of Engineer-in-charge. One Only

182.0 Polishing on wood work with ready mixed wax polish of

approved brand and manufacture :

(A) New work 600.00 114.91 Rs. One Hundred Forteen and Ninety One Only M2 One Meter Square

183.0 Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting, 21514.00 78.37 Rs. Seventy Eight and Thirty Seven Only Kg. One Kilogram

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

184.0 Cleaning of the junction point/ connection point (at ferrul)

of existing live Pipe connections in the existing water supply

main lines for residential quarters & Non-residential

buildings at various locations wherever required including

cost of cutting, threading jointing material cost of all

material and excavation and refilling of trenches dewatering

if any and testing joints etc. complete as directed by

Engineer in charge

(A) 15mm to 40 mm in all residential quarters 800.00 232.00 Rs. Two Hundred Thirty Two Only Each Each

185.0 Disconnecting damaged overhead/terrace PVC water

storage tank of any size from water supply line and

removing from the terrace including shifting at ground level 150.00 250.29 Rs.Two Hundred Fifty and Twenty Nine Only each each

as per direction of Engineer-in-charge.

186.0 Welding by electric plant including transportation of electric

welding plant at site to weld broken grills, hinges, doors,

windows, gates, railing also xray welding works for water

supply pipe lines and any other steel work in building, parks, 300.00 1,134.00 Rs. Eleven Hundred Thirty Four Only Day Per Day

boundary walls, including high skilled welder with helper

also cost including consumable rods (any type electrodes)

etc.complete as per direction of Engineer -in - charge.

187.0 Providing and fixing 12 mm thick frameless toughened glass

door shutter of approved brand and manufacture, including

providing and fixing top & bottom pivot & double acting Rs. Thirty One Hundred Seventy Eight and

hydraulic floor spring type fixing arrangement and making 45.00 3,178.49 M2 Suare Meter

Forty Nine Only

necessary holes etc. for fixing required door fittings, all

complete as per direction of Engineer-in-charge (Door

handle, lock and stopper etc.to be paid separately).

188.0 Repairing of existing side rack / cup board including

200.00 120.00 Rs. One Hundred Twenty Only Each One Number

replacing of locks, runners, laminates etc… complete as

189.0 Providing and fixing G.I. pipes complete with G.I. fittings

including trenching and refilling etc.

(i) 32 mm dia nominal bore 70.00 320.39 Rs. Three Hundred Twenty and Thirty Nine Only Meter One Running Meter

Rs. Three Hundred Ninety and Eighty Five

(ii) 40 mm dia nominal bore 65.00 390.85 Meter One Running Meter

Rs. Four Hundred Fifty Seven and Ninety

(iii) 50 mm dia nominal bore 85.00 457.94 Meter One Running Meter

(iv) 65 mm dia nominal bore 90.00 538.02 Rs. Five Hundred Thirty Eight and Zero Two Only Meter One Running Meter

(v) 80 mm dia nominal bore 80.00 643.37 Rs. Six Hundred Forty Three and Thirty Seven Only Meter One Running Meter

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

190.0 Providing and fixing bright finished brass door latch with

necessary screws etc. complete :

(i) 300x16x5 mm 50.00 191.20 Rs. One Hndred Ninety One and Twenty Only Each Each

(ii) 250x16x5 mm 40.00 181.86 Rs. One Hundred Eighty One and Eighty Six Only Each Each

191.0 Providing and fixing bright finished brass 100 mm mortice

latch and lock with 6 levers and a pair of lever handles of 100.00 506.66 Rs. Five Hundred Six and Sixty Six Only Each Each

approved quality with necessary screws etc. complete.

192.0 Providing and fixing bright finished brass 100 mm mortice

latch with one dead bolt and a pair of lever handles of Rs. Four Hundred Twenty Two and Thirty

50.00 422.38 Each Each

approved quality with necessary screws etc. complete. Eight Only

193.0 Providing and fixing special quality bright finished brass

cupboard or ward robe locks with four levers of approved

quality including necessary screws etc. complete.

(i) 40 mm 150.00 185.43 Rs. One Hundred Eighty Five and Forty Three Only Each Each

(ii) 50 mm 120.00 214.48 Rs. Two Hundred Forteen and Forty Eight Only Each Each

194.0 Supplying the following fixtures of approved quality to the

doors, windows, ventilators, with fixture all complete. As

SS Towerby engineer

bolt 100 mmin charge.

150.00 50.00 Rs. Fifty Only each each

2.0 SS Tower bolt 150 mm 300.00 70.00 Rs. Seventy Only each each

3.0 High Pressure Copper Alloy float valve of nominal size

150.00 200.00 Rs. Two Hundred Only each each

millimeter mm with 200gram weight

5.0 SS Aldrop 300x16 mm 60.00 150.00 Rs. One Hundred Fifty only each each

6.0 SS Gate Hook & Eye Hook -150 mm 250.00 50.00 Rs. Fifty Only each each

7.0 HOSE Pipe/Connector pipe [ULTRA SAFE] upto 1mtr length 150.00 100.00 Rs. One Hundred Only each each

8.0 Water proofing materials 1000.00 35.00 Rs. Thirty Five Only kg per kg

9.0 Godrej Pad Locks IG-4, 7Levers 75 mm As per Defence

100.00 150.00 Rs. One Hundred Fifty Only each each

specification IND/GS/1909 Brass padlocks with male or

10.0 female keystraps with openable mouth round/square shape

200.00 60.00 Rs. Sixty Only each each

and made up of SS 304 (wt not less than 150 gram) 125x125

Stainless Steel Butt Heavy weight unequal flap hinges 300.00 61.96 Rs. Sixty One and Ninety Six Only each each

12.0 125x70x3 mm Butt Heavy weight unequal flap hinges

Stainless Steel 250.00 50.00 Rs. Fifty Only each each

13.0 100x70x2 mm Butt Heavy weight unequal flap hinges

Stainless Steel 150.00 42.00 Rs. Forty Two Only each each

Rotary mm with SDS max machine- Bosch GBH 12-52

1.00 52,000.00 Rs. Fifty Two Thousand Only each each

DV Professional

15.0 Angle Grinder machine – Bosch GWS 14-125 CI Professional 2.00 6,500.00 Rs. Six thousand Five Hundred Only each each

16.0 Diamond Tile Cutter machine – Bosch GDC 141 Professional 3.00 4,200.00 Rs. Four Thousand Two Hundred Only each each

17.0 600x600 mm Stailness steel (304) foldable two rack towel

rail heavy duty with bracke, brass screws with concealed 40.00 1,450.00 Rs. Forteen Hundred Fifty Only each each

fittings arrangement all complete

18.0 Round shaped Overhead shower (Wall mount with shower

200.00 160.00 Rs. One Hundred Sixty Only each each

arm) of size 180 mm

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

19.0 Magnect Cather harrison ABS vergin plastic with provision

300.00 20.00 Rs. Twenty Only each each

of fixing screw

20.0 Rubber Outdoor Door Mat Black big size 50.00 500.00 Rs. Five Hundred Only each each

21.0 Rectangle Executive Table with Pedestal Unit with size

1800x900x750 made with engineering wood (particle

board) 25mm thickness & laminated of table top/ bottam 3.00 15,000.00 Rs. Fifteen Thousand Only each each

with PVC Edge Banding with 4 shelves storage etc complete.

22.0 Cordless Impact Driver/Wrench machine– Bosch GDX 18V-

200 C Professional complete hybrid tool kit set 2.00 13,500.00 Rs. Thirteen Thousand Five Hundred Only each each

23.0 Impact Drill machine – Bosch GSB 16 RE Professional 3.00 7,000.00 Rs, Seven Thousand Only each each

24.0 SS Tower bolt 200 mm 120.00 120.00 Rs. One Hundred Twenty Only each each

195.0 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in foundations and

(A) Cement mortar 1:4 (1 cement : 4 coarse sand) 154.00 586.50 Rs. Five Hundred Eighty Six and Fifty Only M2 One Sq meter

196.0 The work of cleaning of roofs of Residential & Non-

residential in township (Pre/Post monsoon season) (approx.

800 quarters), including disposal/removal of garbage up to a

distance of 500 m outside the periphery of the area cleared

2400.00 50.00 Rs. Fifty Only Nos One Number

and other miscellaneous works through labours wherever

required within the port colony premises, including

necessary ladder, bamboo broom etc, as per direction of

Engineer-In-Charge.

197.0 Providing and fixing cast iron benches of existing size of

three seater, top surface furnished with , latest design, 12.00 2,500.00 Rs. Twenty Five Hundred Only Nos One number

colour, smooth for using maintenance free as directed by

Engineer in charge

198.0 Supplying and filling in plinth with sand under floors, Rs. Fifteen Hundred Twelve and Eighty Four

including watering, ramming, consolidating and dressing 70.00 1,512.84 M3 One Cubic Meter

199.0 Providing and fixing M.S. sluice valves (with cap) complete

with bolts, ss nuts, rubber insertions etc. (the tail pieces if

required will be paid separately) :

(A) 150 mm diameter Class-II Rs. Four thousand Six Hundred Sixty Three

3.00 4,663.26 Each Each

and Twenty Six Only

(B) 200 mm diameter Class-II Rs. Ninety Four Hundred Fifty Eighty and

2.00 9,458.82 Each Each

Eighty Two only

(C ) 250 mm diameter Class-II Rs. Fifteen Thousand Six Hundred Eighty Six

1.00 15,686.83 Each Each

and Eighty Three Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

200.0 Kota stone slab flooring over 40 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of the slab, including rubbing

and polishing complete with base of cement mortar 1 : 4 (1

Rs. Eleven Hundred Ninety Four and Sixty

(A) cement : 4 coarse sand) :

40 mm thick 390.00 1,194.62 M2 One Meter suare

201.0 Providing reinforced by organic fibres and/or inorganic

synthetic fibres cement 6 mm thick corrugated sheets (as

per IS: 14871) roofing up to any pitch and fixing with

Rs. Three Hundred Twenty Three and Forty

polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. 280.00 323.47 M2 One Meter suare

plain and bitumen washers or with self drilling fastener and

EPDM washers etc. complete (excluding the cost of purlins,

rafters and trusses), including cutting sheets to size and

202.0 Providing & laying cement concrete solid block masonry

1:8:6 (machine made) 100 mm thick set in cement mortar 490.00 453.00 Rs. Four Hundred Fifity Three Only M2 One Meter suare

1:6 including curing etc. upto plinth level. all complete as

directed by Engineer in charge

203.0 Providing & laying cement concrete solid blocks 1:8:6

(machine made) confirming to relevant IS (Latest Edition) Rs. Two Thousand Six Hundred Fifty Two

masonry 200 mm thick set in cement mortar 1:6 including 136.00 2,652.00 M3 One Cubic Meter

curing etc. upto floor five levels. All complete as directed by

engineer in charge.

204.0 Providing and supplying following items as per relevent IS

code all complete directed by EIC.

1.0 Hydraulic Excavator of 1 cum bucket 400.00 800.00 Rs.Eight Hundred Only Hours Per Hours

2.0 Tractor with trolley ( O& M) with driver and fuel 724.00 1,200.00 Rs. Twelve Hundred Only Day Per day

3.0 Tipper-5 Cum/10 tonnes :- lead upto 15km 20000.00 3.30 Rs. Three and Thirty Only tonne/km Per tonne/km

4.0 Portland Cement (OPC Grade) 50.00 5,000.00 Rs. Five Thousand Only Tonee Per tonee

5.0 White Cement 1000.00 11.20 Rs. Eleven and Twenty Only Kg Per Kg

6.0 Fine sand (zone IV) 80.00 900.00 Rs. Nine Hundred Only M3 Cubic meter

7.0 Stone Aggregate (Single size) : 40 mm nominal size 30.00 1,300.00 Rs. Thirteen Hundred Only M3 Cubic meter

8.0 Stone Aggregate (Single size) : 20 mm nominal size 50.00 1,400.00 Rs. Forteen Hundred Only M3 Cubic meter

9.0 Stone Aggregate (Single size) : 06 mm nominal size 30.00 1,400.00 Rs. Forteen Hundred Only M3 Cubic meter

10.0 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 50.00 33.00 Rs. Thirty Three Only each Each

11.0 mm diaplastic seat (solid) with lid C.P. brass hinges and

White 100.00 410.00 Rs. Four Hundred Ten Only each Each

12.0 rubber buffers

Common burnt clay modular bricks class designation 12.5 25000.00 5.20 Rs. Five and Twenty Only Nos Nos

13.0 Galvanised steel barbed wire of 9.8 kg /100metre 10.00 5,500.00 Rs. Fifty Five Hundred only Quintle One Quintle

14.0 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 50.00 60.00 Rs. Sixty Only Each Each

15 diaBattery Based Sensor Pillar Cock jaquar make 15.00 6,000.00 Rs. Six Thousand Only Each Each

16.0 Hire and running charges of light crane for 8 hrs 30.00 3,500.00 Rs.Thirty Five Hundred only Day Per day

17.0 Kota stone slab 20 mm to 25 mm thick (semi-polished) 100.00 320.00 Rs. Three hundred Twenty Only M2 One Square Meter

18.0 Granite of any colour, 30 mm thick (slab area upto 0.50 sqm) 50.00 1,900.00 Rs. Nineteen Hundred Only M2 One Square Meter

19.0 Decorative plywood 4 mm 80.00 320.00 Rs.Three Hundred Twenty Only M2 One Square Meter

20.0 12 mm commercial ply 250.00 510.00 Rs. Five Hundred Ten Only M2 One Square Meter

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

21.0 18 mm thick block board with commercial ply veneering on 300.00 775.00 Rs. Seven Hundred Seventy Five Only M2 One Square Meter

Ply side 5 ply with commercial ply on both faces 6 mm thick 120.00 306.00 Rs. Three Hundred Six Only M2 One Square Meter

23.0 UV stabilised 2 mm thick plain FRP sheet 80.00 450.00 Rs. Four Hundred Fifty only M2 One Square Meter

25.0 1.5 mm thick decorative laminated sheet 80.00 380.00 Rs. Three Hundred Eighty Only M2 One Square Meter

26.0 1.0 mm thick decorative laminated sheet 65.00 294.00 Rs. Two Ninty Four Only M2 One Square Meter

27.0 Water proof ply 12 mm thick 180.00 525.00 Rs. Five Hundred Twenty Five Only M2 One Square Meter

28.0 Autoclaved aerated cement (AAC) blocks 30.00 2,650.00 Rs. Twenty Six Hundred Fifty Only M3 One Cubic meter

29.0 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 30.00 70.00 Rs. Sevenety Only Each Each

30.0 mm dia (Needle type 40 mm)

Vibrator 200.00 350.00 Rs. Three Hundred Fifty Only Day Per Day

31.0 Water Tanker 5 to 6 KL capacity 1000.00 200.00 Rs, Two Hundred Only Hours Per Hours

32.0 Front end loader 1 cum bucket capacity 300.00 800.00 Rs. Eight Hundred Only Hours Per Hours

33.0 Bamboo 25 mm dia 2.5 metre long 150.00 400.00 Rs. Four Hundred Only score per Score

34.0 Block board construction flush door with commercial ply on

150.00 1,000.00 Rs. One Thousand Only M2 One Square Meter

both faces 35 mm thick

35.0 Galvanised steel plain sheets 10.00 5,000.00 Rs. Five Thousand Only quintal Per quintal

36.0 Stainless steel (Grade-304) basket (readymade) 200.00 260.00 Rs. Two Hundred Sixty Only Kg Per Kg

37.0 Soft closing stainless steel hinges 40.00 1,550.00 Rs. Fifteen Hundred Fifty Only 10 Sets 10 Sets

38.0 Challies 100.00 765.00 Rs. Seven Hundred Sixty Five Only Each Each

39.0 Stainless steel fancy handle 20.00 1,000.00 Rs. One Thousand Only 10 Sets 10 Sets

40.0 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 15.00 310.00 Rs.Three Hundred Ten Only 10 Sets 10 Sets

41.0 marked steel butt hinges 100x58x1.9 mm IS :

Stainless 12.00 280.00 Rs. Two Hundred Eighty Only 10 Sets 10 Sets

42.0 marked steel butt hinges 75x47x1.8 mm IS : 12817 marked

Stainless 20.00 180.00 Rs. One Hundred Eighty Only 10 Sets 10 Sets

43.0 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS

10.00 375.00 Rs. Three Hundred Seventy Five Only 10 Sets 10 Sets

44.0 Stainless steel butt hinges (heavy weight) 100x64x2.5 mm IS

8.00 275.00 Rs. Two Hundred Seventy Five Only 10 Sets 10 Sets

45.0 Stainless steel screws 40 mm 100.00 250.00 Rs. Two Hundred Fifty Only 100 nos 100 nos

46.0 Stainless steel screws 20 mm 100.00 150.00 Rs. One Hundred Fifty Only 100 nos 100 nos

47.0 Adhesive for marine plywood along with advanced

300.00 250.00 Rs. Two Hundred Fifty Only Kg Per Kg

waterproofing properties

48.0 Solution for pipe and fittings conforming to IS 14182 :-100 200.00 25.00 Rs. Twenty Five Only 100 ml 100 ml

205.0 Reparing & Refixing of door and windows including Labour

for fabrication of uPVC extruded casement/ sliding windows

and doors including drilling holes, fixing of fittings & 102.00 495.00 Rs. Four Hundred Ninety Five Only M2 One Meter Square

hardwares, hire charges of drill machine and electricity

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

206.0 Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable length (

total length 90 m), having 50 nos rounds per 6 metre length,

upto 3 m height of wall with existing angle iron 'Y' shaped

placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. staples and G.I. 1200.00 212.56 Rs. Two Hundred Twelve And Fifty Six Only Meter One Meter

clips to retain horizontal, including necessary bolts or G.I.

barbed wire tied to angle iron, all complete as per direction

of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /

Spring core (2.5mm thick) wire of high tensile strength of

165 kg/ sq.mm with tape (0.52 mm thick) and weight

43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be

207.0 Providing and fixing G.I. chain link fabric fencing of required

width in mesh size 25x25 mm made of G.I. wire of dia 3 mm

including strengthening with 2 mm dia wire or nuts, bolts and 400.00 680.33 Rs. Six Hundred Eighty and Thirty Three Only M2 One Square Meter

washers as required complete as per the direction of enginner in

208.0 Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing Rs. Four Hundred Twenty Eight and Fifty

with necessary accessories & stainless steel dash fasteners , Eight Only

stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as

per approval of Engineer-in-charge, (for payment purpose

only weight of stainless steel members shall be considered

209.0 excluding

Providing fixing accessories

and fixing suchbat

M.S. holder as clamp

nuts, bolts,fasteners

design to sand cast iron/ cast iron (spun) pipes comprising

of M.S. flat brackets made of 50x5 mm flat of specified shape,

projecting 75 mm outside the wall surface and fixed on wall

with 4nos, 6mm dia expansion hold fasteners, including

drilling necessary holes in brick wall/ CC/RCC surface and

the cost of bolts etc. The pipes shall be fixed to the already

fixed brackets with the help of 30 mm x1.6 mm galvanised

M.S. flats of specified shape and of total length 420 mm and

shall be fixed with M.S. nuts, bolts, & washers of size 25x6

Total boltslength

bracket on each side

pipe. shape and design Rs. One Hundred Seventy Three and Fifty

200.00 173.57 Each Each

(for single 100 mm dia pipe) Seven Only

(ii) Total bracket length 810 mm of approved shape and design Rs. Two Hundred Forteen and Eighty Three

150.00 214.83 Each Each

(for two 100 mm dia pipes) Only

(iii) Total bracket length 1040 mm of approved shape and design

100.00 255.90 Rs. Two Hundred Fifty Five and Ninety Only Each Each

(for three 100 mm dia pipes)

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

210.0 Providing and fixing PTMT urinal cock of approved quality

(i) and colour.

15 mm nominal bore, 80 mm long, 42 mm high and 30mm

300.00 104.97 Rs. One Hundred Four and Ninety Seven Only Each Each

wide with BSP female threads weighing not less than 48 gms

211.0 Providing and fixing PTMT 15 mm Urinal spreader size

200.00 64.93 Rs.Sixty Four and Ninety Three Only

95x69x100 mm with 1/2" BSP thread and shapes, weighing

212.0 Repairing of 60 gms Revolving chair including fixing of

wheel, handle, top cover, threading, cutting and providing 150.00 204.00 Rs.Two Hundred Four Only Each One Number

revolving chair wheel if required etc… complete as directed.

213.0 Repairing of existing table including repairing of drawers,

150.00 300.00 Rs. Three Hundred Only Each One Number

replacing of channel, locks, laminates of tables etc…

Providingas directed.

and fixing vertical blinds 100mm Louver width,

quality of approved make fabric made of 100% polyester

woven fabric thickness 0.40mm with Acrylic coating

resistance to Cracking & Fraying and treated for dust

repellency, UV proof , virtually maintenance free having

Rs.Nineteen Hundred Thirty Six and Eighty

plastic bottom chain thickness of chain-0.50mm and 96.00 1,936.80 M2 One Square Meter

diameter-3mm, Plastic with metal bottom weight -

116.20mmX48.30mm and suitable coating on exterior,

including all fixtures and fittings complete in all respect as

per design/color/shade including requisite installation

brackets etc as required for installation at site with

215.0 anchoring arrangements

Providing and fixing 8 mmcomplete as directed

edge moulded by theon

working tables of any shape and size as per the directions of 119.00 701.00 Rs. Seven Hundred One Only M2 One Square Meter

Engineer In-Charge.

216.0 Providing and fixing FRP/PVC heavy Duty manhole cover

Heavy duty with frame 600 x 600 x10mm size clear opening 100.00 420.00 Rs. Four Hundred Twenty only Each Each

including cost of all labour & material as directed.

217.0 Cleaning, rubbing & repolishing of existing Flooring &

Skirting in kota stone /Marbleto provide mirror polish image

by machine polishing including cost of 500.00 119.00 Rs. One Hundred Nineteen Only M2 One Square Meter

mobilising/demobilising the polishing machine to site etc.

complete & as directed by the Engineer In Charge.

218.0 Supplying following heavy duty APVC/PVC pipe fittings

including cost of socket,elbow,tee,bend,solution etc as per IS

inch ball valve 80.00 55.00 Rs. Fifty Five Only Each Each

2.0 1 inchi ball valve 50.00 70.00 Rs.Seventy Only Each Each

3.0 2 inchi ball valve 35.00 110.00 Rs.One Hundred Ten Only Each Each

4.0 3 inchi ball valve 20.00 170.00 Rs. One Hundred Seventy Only Each Each

5.0 4 inchi ball valve 20.00 210.00 Rs. Two Hundred Ten Only Each Each

6.0 4 inch D/C Joint 20.00 110.00 Rs. One Hundred Ten Only Each Each

7.0 6 inch D/C Joint 20.00 130.00 Rs. One Hundred Thirty Only Each Each

8.0 ¾ inch foot valve 30.00 70.00 Rs. Seventy Only Each Each

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

9.0 1 inch foot valve 20.00 90.00 Rs. Ninety Only Each Each

10.0 15 mm dia pipe 400.00 70.00 Rs. Seventy Only M RMT

11.0 20 mm dia pipe 570.00 105.00 Rs. One Hundred Five Only M RMT

12.0 25 mm dia pipe 850.00 138.00 Rs. One Hundred Thirty Eight Only M RMT

13.0 32 mm dia pipe 930.00 175.00 Rs. One Hundred Seventy Five Only M RMT

14.0 40 mm dia pipe 430.00 240.00 Rs. Two Hundred Forty Only M RMT

15.0 50 mm dia pipe 350.00 330.00 Rs. Three Hundred Thirty Only M RMT

16.0 1/2 inch ball valve 110.00 45.00 Rs. Forty Five Only Each Each

219.0 Providing and fixing floor mounted, white vitreous china

single piece, double traps syphonic water closet of approved

brand/ make, shape, size and pattern including integrated

white vitreous china cistern of capacity 10 litres with dual Rs. Eleven Thousand Two Hundred Seventy

12.00 11,270.28 Each Each

flushing system, including all fittings and fixtures with seat and Twenty Eight Only

cover, cistern fittings, nuts, bolts and gasket etc including

making connection with the existing P/S trap, complete in all

respect as per directions of Engineer-in-Charge.

220.0 The contractor shall be mixing bleaching and chlorine of

standard quality as per requirement in the storage tank

(4200 kl capacity) of drinking water supply. The rate shall 24.00 4,210.00 Rs. Forty Two Hundred Ten Only Time One Time

be inclusive of all the material and operation, labour etc. all

comple as directed by engineer in charge.

221.0 Providing & Fixing at site Jagquar/Hindware/Toto make

wall mixture IGBC Certified 3-in-1 / Diverter with overhead

shower with hand operated shower provision including flow Rs. Fifteen Thousand Two Hundred Sixty One

and temprature control device to be fixed at site including all 8.00 15,261.25 Each Each

and Twenty Five Only

necessary connections, fittings, including shower 300 x

mm with arm all labour, materials, etc complete

222.0 Providing and fixing in position bib cock, angular cock/

concealed cock/ long body plillar cock with Floor mount /

Wall Flange Jaguar/ Hindware / Parryware / Roca / kerovit 120.00 1,303.00 Rs. Thirteen Hundred Three Only Each Each

or Eq. make or equivalent IGBC Certfied including all

required connections and settings for proper functioning to

the Engineer's satisfaction.etc all complete.

223.0 Providing and fixing in position two way bib cock Jaguar/

Hindware/Parryware//Roca/kerovit or Eq. Make IGBC

Certfied including all required connections and settings for 85.00 1,850.00 Rs. Eighteen Hundred Fifty Only Each Each

proper functioning to the Engineer's satisfaction.etc all

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

224.0 Providing & Fixing at site Toilet Health Faucet with wall

hook , 8mm diameter and 1.5 meter flexible SS pipe with

anticorrsion resistant including all fittings, material , labour 100.00 1,500.00 Rs. Fifteen Hundred Only Each Each

etc complete. Jaguar/Hindware/Parryware or Eq. make as

per the site requirement etc complete.

225.0 Manufacturing, supplying and fixing retro reflective sign

boards made up of 2 mm thick aluminium sheet, face to be

fully covered with high intensity encapsulated type heat

activated retro reflective sheeting conforming to type - IV of

ASTM-D 4956-01 in blue and silver white or other colour

combination including subject matter, message (bi-lingual),

symbols and borders etc. as per IRC ; 67:2001, pasted on

substrate by an adhesive backing which shall be activated by

applying heat and pressure conforming to class -2 of ASTM-

D-4956-01 and fixing the same with suitable sized

aluminium alloy rivets @ 20 cm c/c to back support frame of

M.S. angle iron of size 25x25x3 mm along with theft

resistant measures, mounted and fixed with 2 Nos. M.S.

angles of size 35x35x5 mm to a vertical post made up to M.S.

Tee section ISMT 50x50x6 mm welded with base plate of

size 100x100x5 mm at the bottom end and including making

holes in pipes, angles flats, providing & fixing M.S. message

plate of required size, steel work to be painted with two or

more coats of synthetic enamel paint of required shade and

of approved brand & manufacture over priming coat of zinc

chromate yellow primer (vertical MS-Tee support to be

painted in black and white colours).Backside of aluminium

sheet to be painted with two or more coats of epoxy paint

over and including appropriate priming coat including all

leads and lifts etc. complete as per drawing , specification

(i) Mandatory/ Regulatory sign boards of 900 mm diametre Rs. Four Thousand Twenty Two and

25.00 4,022.17 Each Each

with support length of 3750 mm Seventeen Only

(ii) Cautionary /warning sign boards of equilateral triangular Rs. Twenty Nine Hundred Forty Six and Forty

16.00 2,946.44 Each Each

shape having each side of 900 mm with support length of Four Only

226.0 Laying old cement cocrete interlocking paver blocks of any

design/shape laid in required line, level, curvature, colour

and pattern over and including 50 mm thick compacted bed Rs. Two Hundred Fifty Three and Sixty One

of coarse sand, filling the joints with fine sand etc. all 2400.00 253.61 M2 One Square Meter

complete as per the direction of Engineer- in charge. (Old CC

paver blocks shall be supplied by the department free of

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

227.0 Supply, Installation, Testing & Commissioning of upto 2 HP

suitable for deep borewell water filled submersible pump

for 60 to 70 meter depth with SS304 , 12-15 stage pump

pure copper of stainless steel body of reputed brand. as

suitable to existing bore-well complete with compatible

panel board the work as per site condition and as directed

by Engineer in charge. Make

Aquatex/Kirlokar/Lubi/CG/CRI etc.

Technical Specification

Head Range : Upto 150 meters

(minimum 60 Mtr)

Discharge Range : Upto 350 LPM (minimum 150 lpm)

Power Ratings : 0.37 to 4.0 kW

Voltage Range : 150 to 240 Volts

Type of Cooling : Water Cooled

Insulation : F Class

Protection : IP

BEE Energy Star Rating: 5 star

(i) 1.0 HP 3.00 12,400.00 Rs. Twelve Thousand Four Hundred Only Each Each

(ii) 1.5 HP 2.00 17,300.00 Rs. Seventeen Thousand Three Hundred Only Each Each

(iii) 2.0 HP 2.00 20,000.00 Rs. Twenty Thousand Only Each Each

Painting (one or more coats) with black Japan paint of

228.0 approved brand and manufacture to give an even shade 1010.00 55.02 Rs. Fifty Five and Zero Two Only M2 One Square Meter

229.0 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 3 mm thick water proofing

membrane, black finished reinforced with glass fibre matt

consisting of a coat of bitumen primer for bitumen

membrane @ 0.40 litre/sqm by the same membrane

manufactured of density at 25°C, 0.87 - 0.89 kg/litre and

viscocity 70 - 160 cps. Over the primer coat the layer of

membrane shall be laid using butane torch and sealing all

joints etc., and preparing the surfacecomplete. The vital

physical and chemical parameters of the membrane shall be

as under: Joint strength in longitudinal and transverse

direction at 23°C as 350/300 N/5 cm. Tear strength in

longitudinal and transverse direction as 60/80N. Softening

point of membrane not less than 150°C. Cold flexibilities

shall be upto -2°C when tested in accordance with ASTM, D -

5147. The laying of membrane shall be got done through the

3mm thick applicator of the manufacturer of membrane : Rs. Three Hundred Seventy Three and Eighty

(a) 4680.00 373.87 M2 One Square Meter

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

230.0 Extra for covering top of membrane with Geotextile,

gsm non woven, 100% polyester of thickness 1 to 1.25 mm

bonded to the membrane with intermittent touch by heating 4680.00 72.45 Rs. Seventy Two And Forty Five Only M2 One Square Meter

the membrane by Butane Torch as per manufactures

231.0 recommendation

Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on top of concrete

roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with

Rs.Three Hundred Thirty One and Ninety One

water in the ratio of 3:1) and two coats of undiluted 2800.00 331.91 M2 One Square Meter

elastomeric waterproofing liquid (dry film thickness of

complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles with

wire brushes, complete in all respect as per the direction of

Providing and applying of swellable type water stop tape,

19mm x 25mm thick in linear meter (expansive nature) for

construction joints treatment of RCC structure such as raft

slab, retaining walls, water storage tank and at the junctions

of raft slab with the retaining walls etc.. After cleaning the

Rs.Three Hundred forty Six and Seventy Eight

232.0 surface, one coat of required primer for swellable water stop 400.00 346.78 M One Running Metre

tape shall be applied throughout the length of the joint Only

@3.78 litre per 240 running meter. Over the primed surface

swellable type water stop tape shall be placed. The work

shall be carried out all complete as per specification and the

direction of the Engineer-In-Charge. The product

performance shall carry guarantee for 10 years against any

233.0 Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate

20 mm nominal size) over 75mm thick bed of dry brick Rs. Four Hundred Seventy Seven and Sixteen

720.00 477.16 M One Running Metre

ballast 40 mm nominal size, well rammed and consolidated Only

and grouted with fine sand, including necessary excavation,

levelling & dressing & finishing the top smooth.

234.0 Supply and installation of wall mount heavy duty baffle filter

decorative Kitchen Chimney (minimum suction-1500 m³/hr)

with follwing features suchas dry heat auto clean

technology& heavy duty blower motor, Soft push-button

controls , matt rust-free coating, black curved Glass with

dimensions of 90 x 90 x 55 cm, is suitable for 250 Sq.foot 4.00 15,000.00 Rs. Fifteen Thousand Only Each Each

area/4 burner stoves. with 3.5 meter 125-150 mm dia

flexible pipe including all fittings. The pipe is to be concealed

with wooden panelling and the length is as per the site

requirement. The price should be inclusive of all civil and

electrical works. (Approved make -

IFB/Kutchina/Kaff/FAber/Elica/Glen etc.)

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

235.0 Providing and fixing chicken wire mesh 150 mm wide

gauge with opening of 25x25mm at the junction of RCC or 100.00 300.00 Rs. Three Hundred Only M2 One Square Meter

specified, including fixing with GI nails all complete to the

satisfaction of the Engineer-in charge.

236.0 Providing and fixing brass Concealed Body for 3-Inlet Single

Lever Diverter, Jaguar/Hardware/Parryware or Eq. Make

IGBC Certified including all required connections and 30.00 2,230.00 Rs. Twenty Two Hundred Thirty Only Each Each

settings for proper functioning to the Engineer's In charge

237.0 satisfaction.

Providing and fixing in Exposed Part Kit of Concealed Stop

Cock & Flush Cock with Fitting Sleeve, Operating Lever &

Adjustable Wall Flange with Chrome finish position, 50.00 1,380.00 Rs. Thirteen Hundred Eighty Only Each Each

Jaguar/Hardware/Parryware or Eq. Make IGBC Certified

including all required connections and settings for proper

functioning to the Engineer's In charge satisfaction.

238.0 Visiting charges for Snake /Monitor lizards catchers as when

146.00 580.00 Rs. Five Hundred Eighty Only Visit Per Visit

required basis as directed by engineer in charge

239.0 Providing & Fixing frosted film of 3-M/ LG/Star make of

approved design pattern, shade and colour to glass panels 135.00 280.00 Rs. Two Hundred Eighty only M2 One Square Meter

including cleaning glass panels etc complete.

240.0 Supply and fixing heavy duty Rotomould /FRP Planter

different size and shape and colour, etc. with including cost

of all labour, T&P material with all taxes complete as per 100.00 1,650.00 Rs. Sixteen Hundred Fifty ONLY Each Each

direction of EIC 60 to 100 ltr capacity.

241.0 Supply and fixing of FRP model dust-bin with different

model like rabbit, cartoon, crocodile, kangaroo, panda,

monkey, etc. with including cost of all labour, T&P material 40.00 1,200.00 Rs. Twe;ve Hundred Only Each Each

with all taxes complete as per direction of EIC 50 ltr capacity

242.0 Supplying & erecting approved make self-priming domestic

mono-block water pump with 0.5 H.P.motor, suitable for

operation on 230 volts 50 c/s.AC supply with metallic flange, 3.00 6,800.00 Rs. Sixty Eight Hundred Only Each Each

delivery and discharge 30 to 60 lpm at 15 mtrs. Head.Make

243.0 Texmo/Kirlokar/Lubi/CG etc. make self-priming domestic

Supplying & erecting approved

mono-block water pump with 1 H.P motor, suitable for

operation on 230 volts, 50c/s. AC supply with metallic 3.00 9,000.00 Rs. Nine Thousand Only Each Each

flange, and M.S. impeller delivery and discharge 40 to70 lpm

at 18 mtrs. head.Make Texmo/Kirlokar/Lubi/CG etc.

244.0 Supplying & erecting approved make self-priming domestic

mono-block water pump with 1.5 H.P motor, suitable for

operation on 230 volts, 50c/s. AC supply with metallic 2.00 12,300.00 Rs. Twe;ve Thousand Three Hundred Only Each Each

flange, and M.S. impeller delivery and discharge 50 to 90 lpm

at 25 Mtr head.Make Texmo/Kirlokar/Lubi/CG etc.

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

245.0 Supplying & erecting approved make self-priming domestic

mono-block water pump with 2 H.P motor, suitable for

operation on 230 volts, 50c/s. AC supply with metallic 2.00 14,800.00 Rs. Forteen Thousand Eight Hundred Only Each Each

flange, and M.S. impeller delivery and discharge 70 to

lpm at 32 Mtr head. Make Texmo/Kirlokar/Lubi/CG etc.

246.0 Providing and fixing high grade stainless steel Heavy Duty

Dual Foldable 304- high Towel Rack 600x250x 230 mm with

weight not less than 1.45 kg all complete with brackets fixed

to wooden cleats with CP brass screws with concealed 40.00 1,870.00 Rs. Eighteen Hundred Seventy Only Each Each

fittings arrangement complete, as per direction of Engineer

in Charge. make Jaquar/Hindware/Parryware/ Kholar/Ruhe

247.0 Providing and fixing Stainless Steel towel ring Square shape

225 mm long, 115 mm wide with minimum distances of

mm from wall face chrome finish, weight not less than 0.22 60.00 430.00 Rs. Four Hundred Thirty Only Each Each

kg, with concealed fittings arrangement complete, as per

direction of Engineer in Charge. make

Jaquar/Hindware/Parryware/ Kholar/Ruhe etc.

248.0 Supply & installation of Lubi / CRI /Crompton /Kirloskar,

make Pressure Pump 1 HP consist of 1 pump set and

pressure tank, Pressure Boosting Pump, 1 HP, Single Phase, Rs. Twenty Five Thousand Seven Hundred

3.00 25,700.00 Each Each

220 Volts, up to 41 M Head range, up to 8400 LPH capacity Only

range necessary fitting with warranty/guranttee as per

manufacture etc all complete.

249.0 Providing and fixing mosquito net door and window shutter

with aluminum Jali & SS jali, second class teak wood frame,

tower bolt, stopper, handle with stainless steel in complete 46.00 1,680.00 Rs. One Thousand Six Hundred Eighty Only M2 One Meter Square

as per direction of engineer in charge.

250.0 Providing and fixing PVC soil waste pipe as per IS

including Y bends Elbow ,T socket of the require suitable

size of the pipe ,the rates are including fitting, cutting

bending complete as per direction of Engineer In- Charge

(i) 75 mm dia pipe 200.00 210.00 Rs. Two Hundred Ten only M One Running meter

(ii) 110 mm dia pipe 350.00 270.00 Rs. Two Hundred Seventy Only M One Running meter

251.0 Providing 20mm thick POP punning in right angle on wall as

directed by Engineer in charge. 300.00 300.00 Rs. Three Hundred Only M2 One Meter Square

252.0 Providing and fixing Counter top basin 560 x 420 x 140 mm

(ALMAS PBW – CTB 5308 PLUMBER) with 32 mm C.P. brass

waste coupling of standard pattern, including 32 mm dia.

Flexible PVC waste pipe,15mmdia.C.P. brass stop cock

Rs. Forteen Thousand Eight Hundred Fifty

(Concealed) of approved quality IS:8931,15mm dia. and 4.00 14,850.00 Each Each

45cm long Un -plasticized PVC Connection pipe with brass

union, liquid soap dispenser (Metal bottle - SQ

PLUMBER) & Swan neck with swivel spout (AZT 1102

PLUMBER)etc& all accessories as directed by Engineer -in -

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

253.0 Providing & fixing fly proof wire gauze to windows,

clerestory windows &doors with M.S. Flat 15x3 mm and nuts

(i) & bolts complete.

Galvanised M.S. Wire gauze with 0.63 mm dia wire and

195.00 512.54 Rs. Five Hundred Twe;ve and Fifty Four Only M2 One Meter Square

mm aperture on both sides

(ii) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire

183.00 680.09 Rs. Six Hundred Eighty and Zero Nine Only M2 One Meter Square

and 1.4 mm aperture on both sides

254.0 Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's 1000.00 141.19 Rs. One Hundred Forty One and Nineteen Only M2 One Meter Square

specifications including appropriate priming coat,

255.0 Providing of surface,

fitting etc. complete.

and fixing ACP paneling on the interior

walls by using ACP in metallic colour of approved shades

made out of 4mm thick aluminum composite panel material

consisting of 3mm thick FR grade mineral core sandwiched

between two Aluminum sheets (each 0.5mm thick). The

aluminum composite panel cladding sheet shall be coil 210.00 2,500.00 Rs. Two Tjousand Five Hundred Only M2 One Meter Square

coated, with Kynar 500 based PVDF / Lumiflon based fluoro

polymer resin coating of approved colour and shade

inclusive of screws, nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc. and complete as per the

instruction of the engineer in charge for walls where

256.0 Servicing and repair work of water softener which includes

cutting of damage parts of existing softener and fixing new

spare parts and service material such as resign,carbon 16.00 2,500.00 Rs.Two Thousand Five Hundred Only Job work Per Job work

media,sand etc all complete to avoid any leakage, etc. once in

a quarters also including service charges.

257.0 Supply, Installation, testing & commissioning of LED Sign

Board including all Accessories etc cost including DPA Logo - 100.00 2,000.00 Rs. Two Thousand Only M2 One Meter Square

As per Design (24”x24” )

Letter Height, Style & Dimensions, both language i.e. hindi &

Specification for Letters:

(i) letter height 9" to 12" height with 3D letters computerized

laser cutting (3mm Imported) on the 4mm ACP sheet with

Letter risings 2" / 3" with PVC female structure

(iii) LED Modules: 1000 numbers approx.,

(iv) IP 67 water and dust resistant for internal letter Illumination

(v) Power Supplies: 400 watts

LED signage board installed at infront of Outisde area of NR

buildings excluding sports complex

258.0 Oiling and greasing of rolling shutters with H.P. equipment

greasing including complete cleaning of oil and scrapping of

grease including labours and materials etc. For rolling 80.00 200.00 Rs. Two Hundred Only Each Each

shutter upto 4.5m height. As per direction of Engineer in

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

259.0 Providing, supplying, erecting and fixing in position

minimum 6 mm thick poly carbonate sheet of approved

colour and texture. Cost including MS/GI frame with vertical

poles,cutting,bending,welding etc. aluminimum patti cover 140.00 1,120.00 Rs. Eleven Hundred Twenty Only M2 One Square Meter

joints and sealing with butyl adhesive and and take as per

manufactures specification and cover all cost of labours

tools, plants,material ,temporary works etc, all complete as

directed by engineer in charge.

260.0 Providing & fixing Sink Mixer (premium quality) with

Swinging Spout with connected legs and wall flanges wall Rs. One Thousand Seven Hundred Eighty

20.00 1,783.00 Each Each

mounted. As directed by engineer in charge. Approved make Three Only

jaquar/Kohler/hindware etc.

261.0 Providing and fixing brass body mortice lock bright brass

finished as per existing lock, heavy duty with brass cylinder,

one side key & one side knob with 6 levers with pair of

15.00 2,500.00 Rs. Twenty Five Hundred Only Each Each

handles, smart computer keys of approved quality with

necessary screws, all complete. dorset or equivalent in

dorma, godrej complete as direction by Engineer- in charge

262.0 Providing & fixing zebra / vertical blinds for windows with

all necessary fixtures and all its accessories as per

requirement and of approved colour and make complete 106.00 2,300.00 Rs. Twenty Three Hundred Only M2 One Square Meter

with all labour and material etc. as directed by Engineer in

Providing and fixing panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows

and clerestory windows (Area of opening for panel inserts

excluding portion inside grooves or rebates to be measured).

Panelling for panelled or panelled and glazed shutters

mm to 40 mm thick :

(A) Second class teak wood Rs. Two Thousand Three Hundred Fifty Two

106.00 2,352.49 M2 One Square Meter

and Forty Nine Only

(B) Decorative plywood one side decorative veneer and Rs. Seventeen Hundred Ninty Nine and Forty

42.00 1,799.49 M2 One Square Meter

commercial veneer on other face (Type 1) conforming to IS Nine Only

264.0 1328 BWRand

Providing Typefixing glazed shutters for doors, windows and

clerestory windows using 4 mm thick float glass panes

(weight not less than 10 kg per sqm) fixing with ISI marked

M.S. pressed butt hinges bright finished of required size with

necessary screws. (a) Kiln seasoned and chemically treated

hollock wood Rs. Two Thousand Twenty Seven and Sixty

(i) 30 mm thick 50.00 2,027.62 M2 One Square Meter

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

265.0 Providing and fixing factory made uPVC white colour sliding

glazed window upto 1.50 m in height dimension comprising

of uPVC multi-chambered frame with in-built roller track

and sash extruded profiles duly reinforced with 1.60 ±

mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according

to uPVC profile), appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks, EPDM gasket,

wool pile, zinc alloy (white powder coated) touch locks with

hook, zinc alloy body with single nylon rollers (weight

bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size

for fixing frame to finished wall and necessary stainless steel

screws etc. Profile of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling of holes for

fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealent over backer

rod of required size and of approved quality, all complete as

per approved drawing & direction of Engineer-in Charge.

(Single / double glass panes, wire mesh and silicon sealent

shall be paid separately). Variation in profile dimension in

higher side shall be accepted but no extra payment on this

account shall be made. Note: For uPVC frame and sash

(i) Three track three panels sliding window with fly proof S.S

wire mesh (Two nos. glazed & one no. wire mesh panels)

made of (big series) frame 116 x 45 mm & sash 46 x 62 mm Rs. Sixty Seven Hundred Forty Nine and Eight

45.00 6,749.82 M2 One Square Meter

both having wall thickness of 2.3 ± 0.2 mm and single Two Only

glazing bead / double glazing bead of appropriate

dimension. (Area of window above 1.75 sqm).

(ii) Three track three panels sliding window with fly proof SS

wire mesh (Two nos. glazed & one no. wire mesh panels)

made of (small series) frame 92 x 44 mm & sash 32 x 60 mm Rs. Seven Thousand Twenty One and Twenty

19.00 7,021.21 M2 One Square Meter

both having wall thickness of 1.9 ± 0.2 mm and single One Only

glazing bead of appropriate dimension (Area of window upto

(iii) Three track three panels sliding window made of (big series)

frame 116 x 45 mm & sash 46 x 62 mm both having wall Rs. Sixty Four Hundred Twenty Eight and

thickness of 2.3 ± 0.2 mm and single glazing bead / double 19.00 6,428.31 M2 One Square Meter

Thirty One Only

glazing bead of appropriate dimension. (Area of window

266.0 above 1.75and

Providing sqm)fixing casement handle made of zinc alloyed

(white powder coated) for uPVC casement window with Rs. One Hundred Thirty One and Ninety Nine

55.00 131.99 Each Each

necessary screws etc.complete. Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

267.0 Providing and fixing factory made uPVC white colour sliding

glazed door comprising of uPVC multi-chambered frame

with in-built roller track and sash extruded profiles duly

reinforced with 1.60 ± 0.2 mm thick galvanized mild steel

section made from roll forming process of required length

(shape & size according to uPVC profile), appropriate

dimension uPVC extruded glazing beads, uPVC extruded

interlock and uPVC extruded Inline sash adaptor (if

required), EPDM gasket, wool pile, zinc alloy (white powder

coated) handle with key on one side of extreme panels along

with zinc plated mild steel multi point locking having

transmission gear with keeps, zinc alloy (white powder

coated) cresent lock (if required), stainless steel (SS

grade) body with adjustable double nylon rollers (weight

bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size

for fixing frame to finished wall and necessary stainless steel

screws etc. Profile of frame & sash shall be mitred cut and

fusion welded at all corners, including drilling of holes for

fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealent over backer

rod of required size and of approved quality, all complete as

per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes, wire mesh and silicon sealent

shall be paid separately). Variation in profile dimension in

higher side shall be accepted but no extra payment on this

(i) Three track three panels sliding door with fly proof S.S wire

mesh (Two nos. glazed & one no. wire mesh panels) made of

(big series) frame 116 x 45 mm & sash 46 x 82 mm both Rs. Sixty One Hundred Thirty Six and Eighty

28.00 6136.80 M2 One Square Meter

having wall thickness of 2.3 ± 0.2 mm and single glazing Only

bead / double glazing bead of appropriate dimension. (Area

of door above 2.00 sqm upto 5.00 sqm)

(ii) Three track three panels sliding door made of (big series)

frame 116 x 45 mm & sash 46 x 82 mm both having wall Rs. Forty Eight Hundred Fifty Eight and

thickness of 2.3 ± 0.2 mm and single glazing bead / double 13.00 4858.32 M2 One Square Meter

Thirty Two Only

glazing bead of appropriate dimension. (Area of door above

268.0 5.00 sqm) and fixing stainless steel (SS-304 grade) friction

hinges to the side/ top hung uPVC windows, of approved

quality, with necessary stainless steel screws etc. as per

direction Rs.Two Hundred Eighteen and Twenty Six

Engineer-in-charge.

mm 15.00 218.26 Each Each

Rs. Two Hundred Forty One and Sixty Eight

(ii) 250 x 19 x 1.9 mm 12.00 241.68 Each Each

Rs. Two Hundred Sixty Three and Twenty

(iii) 300 x 19 x 1.9 mm 8.00 263.20 Each Each

269.0 Providing and fixing zinc alloyed (white powder coated) Rs. One Hundred Seventeen and Zero One

10.00 117.01 Each Each

touch lock for uPVC sliding window with necessary screws Only

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

270.0 Providing and fixing steel roller for uPVC sliding window

20.00 66.43 Rs. Sixty Six and Forty Three Only Each Each

with necessary screws etc. complete.

271.0 Providing and fixing steel roller for uPVC sliding door with

10.00 108.57 Rs. One hundred Eight and Fifty Seven Only Each Each

necessary screws etc. complete.

272.0 Providing and fixing steel (white power coated) crescent Rs.One Hundred Thirteen and Twenty Six

10.00 113.26 Each Each

lock for uPVC sliding window/ door with necessary screws Only

273.0 etc. complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

(i) Flexible pipe - 40 mm dia 2001.00 31.68 Rs. Thirty One and Sixty Eight Only Each Each

274.0 Providing and fixing toilet paper holder :

Rs.Four Hundred Seventy Six and Fifty Six

(i) C.P. brass 50.00 476.56 Each Each

275.0 Providing and fixing aluminium hanging floor door stopper,

ISI marked,anodised (anodic coating not less than grade AC

10 as per IS : 1868)transparent or dyed to required colour

and shade, with necessary screws etc. complete.

(i) Single rubber stopper 364.00 24.85 Rs. Twenty Four and Eighty Five Only Each Each

(ii) Twin rubber stopper 240.00 43.58 Rs. Fourty Three and Fifty Eight Only Each Each

276.0 Washed stone grit plaster on exterior walls height upto

metre above ground level, in two layers, under layer 12 mm

cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the

under layer with scratching tool, applying cement slurry on

the under layer @ 2 Kg of cement per square metre, top

layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse Rs. Six Hundred Eighty Nine and Eighty Two

255.00 689.82 M2 One Meter Square

sand : 2 stone chipping 10 mm nominal size), in panels with Only

groove all around as per approved pattern, including

scrubbing and washing the top layer with brushes and water

to expose the stone chippings ,complete as per specification

and direction of Engineer-in- charge (payment for providing

grooves shall be made separately).

277.0 Providing the services of skilled carpentar with helper as

when required basis with esssential tools to attend day to

day maintenance works, that are not considered in items or 1448.00 1,015.00 Rs. One Thousand Fifteen Only Man Man days

non-measurable work rate all levies inclusive of contractor's

profit, transport and overheads etc all complete as directed

by engineer in charge.

278.0 Providing the services of skilled mason with helper as when

required basis with esssential tools to attend day to day

maintenance works, that are not considered in items or non- 1,448.00 1,105.00 Rs. One Thousand One Hundred Five Only Man Man days

measurable work rate all levies inclusive of contractor's

profit, transport and overheads etc all complete as directed

by engineer in charge.

279.0 Supply of following manpower as when required basis with

required tools plants, machinery etc.. All complete as

(i) directed by

Unskilled Engineer

labour in charge.

for helper 2,896.00 541.00 Rs. Five Hundred Fourty One Only Man Man Days

Sr. Description of Items Rate Unit

No. Quantity Amount

In fig. In Words In Fig. In Words

(ii) High skilled Painter for various wall painting skecth and

300.00 714.00 Rs. Seven Hundred Fourteen only Man Man Days

letter writing in hindi/english

(iii) Chokidar for estate office excluding general shift (15:00 to

1,448.00 645.00 Rs. Six Hundred Fouty Five Only Man Man Days

23:00 Hrs and 23:00 to 07:00 Hrs)

280.0 Dry cleaning of Sofa sets & Carpets;-

(i) One seater 95.00 60.00 Rs. Sixty Only Nos One Number

(ii) Two seater 82.00 90.00 Rs. Ninety only Nos One Number

(iii)Three seater 78.00 130.00 Rs. One Hundred Thirty Only Nos One Number

(iv) Carpets 300.00 40.00 Rs. Fourty Only M2 One Meter Square

281.0 Charges for providing & Fixing of glass door pivots of make

20.00 820.00 Rs. Eight Hundred Twenty Only Nos One Number

Dorset/ Dorma including material & labour etc. all complete

281.0 Reparing ofby EIC. aluminium window including removal &

refixing, cutting, replacement of packing rubber, damged

glass,wheel and necessary fixture if required size & shape, 200.00 672.00 Rs. Six Hundred Seventy Two Only M2 One Meter Square

fixing the frame including the between fram frame and

adjacent finished wall shall be filled with with weather

silicon sealent as directed by E-I-C.

282.0 Reparing existing Sluice valve /gate valve size 150 to

mm, including removal & refixing with nut bolt , 5mm Rs. Two Thousand One Hundred Eighty Nine

rubber gasket if required replacemt of brass gutkha with 10.00 2,189.00 Each Each

cap rod,nut bolt etc all complete as directed by E-I-C.

I/ We am/are willing to carry out this work at ________ % above/ below (percentage should be written in figure and words).

The tendered rates mentioned above amount of my/our tender are put as under:-

Estimated amount put to tender Rs.__________ Estimated amount put to tender Rs.________

In words (Rupees________________________ In words (Rupees______________________

Contractor EXECUTIVE ENGINEER (TD)

DEENDAYAL PORT AUTHORITY