REPAIRS RECANNING POLISHING OF WOODEN FURNITURE AT MIL STN BHUJ AND GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Chair writing (Drawing No. FD-280) : Removing of the following old broken / unserviceable parts from the chair writing and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg complete all as specified and as directed by Engr-in-Charge.

Front Leg

Rear Leg

Arm Rest

Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg complete all as specified and as directed by Engr-in-Charge.

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed.

Chair Dining (Drawing No. FD-279) : Removing of the following old broken / unserviceable parts from the chair Dining and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg complete all as specified and as directed by Engr-in-Charge.

Front Leg

Rear Leg

Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Chair Easy (Drawing No. FD-229) : Removing of the following old broken / unserviceable parts from the Chair Easy and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Front Leg

Rear Leg

Arm Rest

Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg complete all as specified and directed

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as specified and directed

Bed Plywood Top (Drawing No. FD-246) : Removing of the following old broken/unserviceable parts from the Bed Plywood Top and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and as directed by Engr-in-Charge

Removing of old unsv existing Plywood Top from the item and S&F new top made of 12mm thick plywood commercial exterior grade of relevant IS of shape and size as per Drg complete all as specified and directed

Removing of old unsv existing unsv teak face plywood 4mm thick from the head board and S&F new 4 mm thick one side teak face on both side of head board with 4mm thick teak wood beading around the head board after repairing the complete head board as per shape and size given in the Drg complete all as specified and directed.

Removing of old unsv existing unsv teak face plywood 4mm thick from the foot board and S&F new 4 mm thick one side teak face on both side of Foot board with 4mm thick teak wood beading around the Foot board after repairing the complete Foot board as per shape and size given in the Drg complete all as specified and directed.

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Table Centre (Drawing No. FD-274) : Removing of the following old broken/unserviceable parts from the Table Centre and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as pecified and directed

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Table Peg (Drawing No. FD-277) : Removing of the following old broken/unserviceable parts from the Table Peg and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish.

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Teapoy (Drawing No. FD-278): Removing of the following old broken/unserviceable parts from the Teapoy and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish.

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Table 900x600x760mm with & without drawers (Drawing No. FD-283 & 284) : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish.

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Table 600x600x760mm (Drawing No. FD-293) : Removing of the following old broken/unserviceable parts from the item and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed by Engr-in-Charge

Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as pecified and directed

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

Taking out unserviceable mirror of hat stand and S&F of new mirror,of size 5.5 mm thick ness as given in Drg of Make (Drawing No. FD-362) : Atul/Modiguard and fixed complete all ass pecified on drawing and directed.

S&F in replacement of new copper anodised Steel pegs as per existing shape & size complete all as specified on drawing and directed.

Removing of old unsv plywood front side of hat stand and and S&F new plywood of hat stand one side teak face 4 mm thick with 4 mm thick teak wood beading all round

M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Nirmal Construction (BID ID -3107834)