Design and Development of Shastri Maidan, Gadhasar ground,Mundra-Baroi Nagarpalika

Name of Work : Design and Development of Shastri Maidan, Gadhasar ground, Mundra

Bill of Quantity

Sr No Item Description Unit Qty Rate Amount in Rs.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone

4 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation Cmt 169 ₹3,095.25 ₹5,23,096.57

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

5 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation Cmt 20 ₹2,769.69 ₹55,393.85

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in

position complete upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of

7 formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of Cmt 113 ₹4,330.79 ₹4,89,379.17

columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of

8 formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Cmt 211 ₹4,614.37 ₹9,73,631.39

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of

9 formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and Cmt 34 ₹4,719.77 ₹1,60,472.19

struts,upto floor two level.

Brick work using common burnt clay building bricks having crushing strength not less than

10 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Cmt 455 ₹4,596.11 ₹20,91,228.23

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Conventional extra for brick work in superstructure above plinth level up to floor two level (B)

Half brick masonry in common brunt clay building bricks having crushing strength not less than

12 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in foundation and plinth (B) Sq.M. 66 ₹618.79 ₹40,839.92

Half brick thick honey- comb brick work with common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. (ii) In Cement Mortar 1:5 ( 1- Cement : 5 - coarse sand)

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

15 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sq.M. 388 ₹263.90 ₹1,02,394.33

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (G) Columns PillarsPosts and struts. (2)Circular or curved in Plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

18 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sq.M. 811 ₹205.45 ₹1,66,623.36

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth.

FULLY GLASS ALUMINIUM DOOR - providing and fixing matt / glossy finished colored, 15 micron

anodised aluminium section made from aluminium glazed door of frame section 20048 x (63.50 x

38.10 x 2.0 = 1.30 Kg/mt), shutter hinge side (85 x 44.45 x 1.80 = 1.30 kg/mt) weight with 8mm

thick toughened reflective glass 9Saint-Gobain / Modi) make quality with glazing patti, rubber

packing including brass pivot hinges, floor spring, handles with locking arrangement etc. complete

with matt / glossy finished colored anodised fixtures and fastenings, vertical and horizontal hollow

frame section totally filled with non-teak wooden battens etc. complete as directed by EIC and

architect drawings.

Providing and fixing flush door shutters, solid core construction with frame of first class hardwood

with cross board and face veneer or plywood face panels, Including anodised alluminium butt

hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

21 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Sq.M. 31 ₹2,607.51 ₹80,832.71

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @

22 Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted Sq.M. 13 ₹1,175.56 ₹15,282.27

glass as details etc complete for Ventilation

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed together at the ends by end locks mounted on

23 specially designed pipe shaft with bracket plates, guide channels and arragements for inside and Sq.M. 44 ₹3,554.40 ₹1,56,393.69

outside locking with push-pull operation including the cost of hood cover and spring etc.

complete.(A) Shutters having width below 3.5 M.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Providing and laying Granite stone slab flooring over 20mm (Average) thick base of cement mortar

1:6 (1- cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 20mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

26 laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement Sq.M. 15 ₹1,130.79 ₹16,961.79

slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 24'' in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick

30 walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar Sq.M. 829 ₹180.40 ₹1,49,548.37

1:3 (1-cement:3-sand)

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

Providing 20 mm thick double coat mala cement plaster on exterior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc. complete.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

33 undecorated wall surface to give an even shade including throughly brushing the surface free from Sq.M. 829 ₹84.37 ₹69,938.83

mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

34 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of Sq.M. 1481 ₹120.26 ₹1,78,106.10

loose powdered materials.etc complete

Constructing of platform ( sandwich type ) 68cm width and 80cm high resting on thick sandwiched

polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough kota stone at bottom

and 20 to 25 mm thick Polish Granite stone ( single piece/ telephonic Black ) top & Vertical and

35 polished granite stone (single piece/ telephonic Black ) 20 to 25mm thick on top & 18mm thick in Rmt 14 ₹3,639.03 ₹50,946.42

Vertical with 15mm high machine cut polished granite round moulded Top facia patty including

polishing etc . complete as per drawing and specification without stainless steel sink including

necessary cutting for sink & making hole for gas pipe and fixing P.V.C bend of 25mm dia.

Anti-Termite System: Providing and laying of permanent piping technology anti-termite treatment

before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. &

mm 1.D. with inbuilt pressure compensation chip every 30 cm interval in the tube, having working

pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall

be installed at the entire periphery of the building and at internal network of building at a depth of

20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends

of loop pass through a PVC elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into junction

box and the loops shall terminate in junction boxes & test every junction during injecting chemicals

for termite control treatment. The anti termite chemical Imidacloprid 30.5% SC mix as per IS-6313

(part III) shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at the

rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan for piping system

and junction boxes dully approved by Engineer-in-Charge with bond of 5year warranty.(i)Anti

Termite chemical injected area (Chemical injecting incl. labour cost

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying:(a) First

layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @

kg/ sqm. This layer will be allowed to air cure for 4 hours.

37 (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound Sq.M. 52 ₹528.15 ₹27,463.95

@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for

The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed slurry

Supplying and filling in foundation and plinth with RUBBLE including filling voids with sand and

watering etc.complete.

Providing and Fixing brown kandla in 20 mm thick jambs, sills and soffits as specified / shown in

drawing for external Surface of walls, Beams, Columns, and Slabs with approved Chemical adhesive

as per details including minimum 15 mm thick Single coat or Rough coat waterproof cement sand

plaster; in cement sand mortar of mix ratio 1:4 (1 Cement : 4 Sand). finished as specified and as

directed by Engineer -In charge. Work to include hacking the R.C.C. surfaces, applying chemical

39 adhesive to concrete surfaces and scratch coat (Prior to base coat of plaster for better bond), Sq.M. 104 ₹5,124.47 ₹5,32,944.42

raking out joints, cleaning surfaces, doing independent double-legged scaffolding (to avoid

scaffolding holes in walls), preparing joints by pointing / grouting square crushed aggregate, as

detailed in drawings, curing, cleaning etc. all complete and to the approval of the PM. specifications

including chamfering and Molding of stone etc. complete to satisfactory of architect and as

approved by architect for all heights and floors including the scaffolding as required

Providing and laying integrated cement based proofing treatment of required thickness over the

roof including 10 mm thick waterproofing cement plaster in cement plaster in cement mortar 1:3

and china mosaic finish and finally finishing the surface with white cement slurry and slopping out

terrace slabs with following specification laid to required slope not flatter than 1:80 ( the thickness

of water proofing treatment near rainwater outlet or the lowest point of the finished slope shall

not be less then 45 mm, including treating the vertical surfase of the parapet wall up to 20cms .

height above finished level of terracing including finishing the top with joint less water proofing

plaster, curing, testing etc. complete. Rate is including ten years performance of guarantee bond to

be given on stamp paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with

properly water proofing compound conforming to IS -2645 and 10 mm thick water proofing cement

plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the surface before treatment

(B) Providing and applying one coat of moisture tolerant epoxy primer, as per manufacturers

specification, of approved make followed by supply and apply 2 coats of high performance single

component, bitumen / tar free, Pure polyurethane based, liquid applied waterproofing elastomeric

membrane, shall be applied @ Min 2.3 Kg/sqm total consumption to a form total DFT of Min

1.5mm (conforming to ASTM C 898), on the floor & on verticals upto 200mm and protected by

providing and laying 150 GSM Polypropylene Geotextile on horizontal surfaces etc. complete as

per manufacturers specification

The waterproofing material shall conform :

1. Elongation > 400% as per ASTM D

2. Tensile strength > 2 Mpa as per ASTM D

3. Crack bridging upto 2mm

4. Water Head Resistance > 5 bar

5. Solid content > 80-85% as per ASTM C

6. Adhesion to Concrete > 20 Mpa as per ASTM D

7. Shore A Hardness > 65 as per ASTM D

41 (C) Laying broken brick bats 25 mm to 40 mm size with 50% of cement mortar 1:4 (1cement :4

coarse sand ) over 10 mm thick water proofing cement plaster in cement mortar 1:3 (1 cement

coarse sand) admixed with proprietary water proofing compound conforming to IS 2645 to

required slope and treating similarly the adjoining walls up to 200 mm height incl. rounding of

junction of walls.

(D) After Two Days of proper curing applying a second floor of cement slurry

(F) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curring for final test

All above operation to be done in order and as directed and specified by the Engineer In Charge.

Providing And Fixing Brick Cladding Using Approved Facing Bricks Of Specified Size, Color, And

Texture, Set In Cement Mortar 1:3 (1 Cement: 3 Fine Sand), Including Cutting, Bonding, Backing

42 Mortar, Expansion Joints, Pointing In Matching Color, Cleaning, Scaffolding, Curing, And All Sq.M. 241 ₹2,020.00 ₹4,86,820.00

Necessary Tools, Plants, Materials, And Labor To Complete The Work As Per Specifications,

Drawings, And Instructions Of The Engineer-In-Charge.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

manufacturer's specifications including appropriate priming coat, preparation of surface, etc.

13.52.1 on steel work

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of

47 girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a Sq.M. 2700 ₹15.06 ₹40,673.90

distance of 50 m outside the periphery of the area cleared

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with

all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

49 serviceable materilas and disposal of unserviceable materials with Cu.M 171 ₹562.89 ₹96,254.74

all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

51 Dismentling steel work including distempering and stacking the materials with all lead and lift. Kg 100 ₹3.85 ₹384.81

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates

Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ

reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile

cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but

including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete.

(Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) :

400 mm dia pile

Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth,

breaking clods, watering, rolling each layer with 1⁄2 tonne roller, or wooden or steel rammers, and

rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in

embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for

All kinds of soil

Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete

(earth measured in stacks will be reduced by 20% for payment).

Grassing with selection No. 1 doob grass including watering and maintenance of the lawn for

57 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including Sq.M. 5180 ₹15.15 ₹78,477.00

supplying good earth, if needed (the grass and good earth shall be paid for separately).

Supplying and stacking sludge at site including royalty and carriage upto 5km lead complete (sludge

measured in stacks will be reduced by 8% for payment).

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of

59 officer-in-charge (cost of sludge, dump manure and/ or Cum 1554 ₹44.81 ₹69,631.71

good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level

and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of

size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long.

The vertical mambers shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the

vertical member of the cage. One name plate of 1mm thick M.S. sheet of size 250x100 mm shall be

welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved

name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four

corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard

shall be painted with two or more coats of synthetic enamel paint of approved brand and

manufacture over a coat of primer, complete in all respect.

62 Providing and stacking of trees:-

Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of

the officer-in-charge.

Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of

the officer-in-charge.

Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of

the officer-in-charge.

Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction

of the officer-in-charge.

Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the

officer-in-charge.

Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated,

Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of

height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per

direction of the officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable

material’s as per direction of officer in charge (excluding cast of plant & water)

Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree

using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the

trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1%

concentration and as per direction of officer-in-charge.

Excavation & Compaction:- '1. Clearing & Grubbing: Cutting, removing and disposing of all

materials such as trees, bushes, shrubs, stumps, roots, grass, weeds, rubbish, top organic soil, etc.

in the area, to an average depth of 150 mm, which are unsuitable for incorporation in the works.

2. Excavation: Grading and slope preparation to a maximum depth of 150mm, after clearing and

grubbing, in case further excavation is required for slopes, levels & grading purposes.

2. Anti-Termite & Weedicide Treatment: Carry out anti termite and weedicide treatment in the

total area by spraying & making 9” deep holes spaced 12” apart and injecting the prescribed

chemicals into these holes.

3. Compaction & Grading: The area will then be compacted to at least 95% proctor density,

confirmed by a third party lab test, while creating a slope of 1” for every 10’ on the shorter axis.

Wet Mix MacAdam

(WMM):- 1. WMM Layer: Supply and laying of a Wet Mix Macadam base with an average

thickness of 100mm. Consists of a base layer of 40mm and smaller metal(crushed) stone to form

levels as per drawings, a middle layer of 25mm and smaller metal(crushed) stone and finally 6mm

metal(crushed) stone mixed with grit as the top layer. Grade specifications for the coarse aggregate

in the WMM will be as per Table 400-12 : Physical Requirements of Coarse Aggregates for Wet Mix

Macadam for Sub-base/Base Courses & Table 400-13 : Grading Requirements of Aggregates for

Wet Mix Macadam of the MORTH, fifth edition,

2. Crossfall: The surface shall have a cross fall matching the adjacent area and shall have a surface

variation not exceeding 4mm in 3 metre straight edge in any direction.

3. Compaction & Grading: After the mix has been laid to the required thickness, grade and

crossfall/camber, it shall be uniformly compacted to the full depth with a vibratory roller of

minimum static weight of 80 to 100 kN. The speed of the roller shall not exceed 5 km/h. Any

displacement occurring as a result of reversing of the direction of a roller or from any other cause

shall be corrected at once as specified and/or removed and made good. Along forms, kerbs, walls

or other places not accessible to the roller, the mixture shall be thoroughly compacted with

mechanical tampers or a plate compactor. Rolling shall continue till the density achieved is at least

98 percent of the maximum dry density for the material as determined by the method outlined in

IS:2720 (Part-8), while creating a slope of 1” for every 10’ on the shorter axis. The surface, on

completion of compaction shall be well closed, free from movement under compaction equipment

and from compaction planes, ridges, cracks or loose material. All loose, segregated or otherwise

defective areas shall be made good to the full thickness of layer and re-compacted.

Asphalt:- Supply & Laying of the Asphalt subbase (laid as per MORTH specifications for Road &

Bridge Work Fifth Edition, 2013)

1. Preparation: The surface on which the bituminous work is to be laid shall be cleaned of all loose

and extraneous matter by means of a mechanical broom and/ or air jet.

2. Laying: As soon as possible after arrival at site, the materials shall be supplied continuously to

the paver and laid without delay. The travel rate of the paver, and its method of operations, shall

be adjusted to ensure an even and uniform flow of bituminous material across the screed, free

from dragging, tearing and segregation of the material. In areas with restricted space (such as

confined spaces, foot ways, of irregular shape and varying thickness, approaches to expansion

joints, etc.) where paver cannot be used, the material shall be spread, raked and levelled with

suitable hand tools by trained staff.

3. Bituminous Base:

(a) Primer - Application of a single coat of low viscosity liquid bituminous material to a porous

granular surface preparatory to the superimposition of bituminous treatment or mix.

(b) Bituminous McAdam (BM) Base Layer - 30mm thick. Mixed using 12 mm metal stone (60%

by volume) and 8-12mm metal stone (40% by volume) & 4% bitumen as a hot mix.

(b) Bituminous Concrete (BC) Middle Layer- 20 mm thick. Mixed using 6mm metal stone & 5.5%

bitumen as a hot mix)

(c) Seal coat - Used as a pore/ void filler. Mixed using metal stone dust & 7.5% bitumen as a hot

4. Compaction: Rolling shall be continued until the specified density is achieved, or where no

density is specified, until there is no further movement under the roller.

Trench Drain with FRP Cover (for Running & Walking Track) :- Providing and constructing a 6 inch

wide, 12 inches deep, trench drain on the inner perimeter of the track, suitable for draining storm

water off the running track with a suitably designed sloped. The trench drain will be connected to

an external outlet/ connected to an existing chamber for water run off, as per design. The trench

drain will be covered suitably with an FRP Cover of appropriate width, approved design & colour.

Includes excvation, labour, machinery and all other costs involved in construction of the drain.

Toe Wall :- Construction of a 150mm thick and 300mm high blockwork toe wall in 2 courses with a

minimum crushing strength of 50 Kgs/Sqcm. The base will consist of a hand mixed PCC bed atleast

3'' thick. Constructed in cement mortar (C.M), with a ratio of 1:6.

Finished with two coats of plaster for external surfaces -

(a) Base Coat - 12mm thick with C.M 1:4 and

(b) Finishing Coat - 6mm thick with C.M 1:3 and a sponge/ rough finish at all levels and heights.

Includes all material and labour as per specifications, drawings and directions with all necessary

tools and tackle, scaffolding & machinery.

14.5mm EPDM Athletic Sandwich Track System :- Supply & Installation of an EPDM Athletic

Sandwich Track System, which is a two layer, spike resistant, impermeable and resilient

polyurethane athletic surface.

1. Layer 1: A Primer for adhesion between the asphalt and the sandwich track system.

2. Layer 2: The next layer consists of black Styrene Butadiene Rubber (SBR) granules, bound

together with a specially formulated, 100% solids MDI based single component polyurethane and a

76 total laid thickness of 10mm. Sq.M. 1020 ₹4,899.51 ₹49,97,500.20

3. Layer 3: Pore Sealer, to seal the pores in the prevciously laid SBR layer.

4. Layer 4: The top layer consists of a specially formulated, self levelling PU, onto which the

EPDM granules are broadcast by hand.

Competition level marking is carried out after the top layer has dried suuficiently. The design of the

markings can be as per your requirements.

RCC :- Supply & Installation of M20 grade, 100mm thick RCC with a VDF finish, using 10mm TMT bar

spaced 250 c/c. The strength should conform to IS 10262-2009 & IS 456:2000 specifications. After

the required curing has been carried out, expansion grooves 1 X 1 m will be cut and filled using

HDPE Net Fence :- Supplying, stretching & fixing in position a Garware HDPE Sports Net with 2.5mm

thickness & 50mm mesh size over a MS Frame (Net Colours available are green & black). This will

include the four sides and the roof.

78 MS Frame: The MS Frame will consist of 100mm x 100mm x 3.5mm vertical sections with 20' Sq.M. 1070 ₹719.12 ₹7,69,458.40

height, and 50mm x 50mm x 2.5mm horizontal support sections welded at the top, middle &

bottom. The frame will be painted with a zinc chromate primer and 2 coats of enamel paint, in a

colour as per the approved design.

Pedestal Footing for Fencing Poles :- Pedestal footing for the vertical clomuns. This is a cost

estimate for a 3' x 3' x 3' column with J bolts and a 10mm base plate for erection of the columns.

Actual specifications will be calculated based on approved design and inputs from the structural

LDPE Sheet :- Supply & Laying of 200 GSM LDPE sheet as a moisture barrier between the WMM &

13mm Multipurpose Turf (Non-Pitch Area) :- Supply & Installation of Multipurpose Turf with a pile

height of 13mm, recommended for Basketball, Volleyball, Tennis, Futsal and other sports.

Installation of Turf will be done using a seam tape & suitable PU adhesive. It will be infilled with

silica sand for weight.

1. Composition: PE.

2. Structure: Monofilament curl.

81 4. Tape thickness: 130μm±15μm. Sq.M. 447 ₹1,410.97 ₹6,30,703.59

5. Tape Width: 250-300 mm.

6. Pile height: 13mm±1mm.

7. Gauge: 3/16 inch.

8. Stitches: 35/10cm

9. Total yarn weight: 1860g/sqm ±10%.

10. Primary backing: Anti-UV PP + PU coating.

11. Secondary backing: Latex.

10mm Cricket Turf (Pitch Area) :- Supply & Installation of Globally Certified Cricket Turf with a pile

height of 10mm, recommended for both water or sand dressed cricket international & national

level tournaments. Installation of Turf will be done using a seam tape & suitable PU adhesive.

1. Composition: PE.

2. Structure: Monofilament curl.

4. Tape thickness: 130μm±15μm.

5. Tape Width: 250-300 mm.

6. Pile height: 10mm±1mm.

7. Gauge: 3/16 inch.

8. Stitches: 34/10cm

9. Total yarn weight: 1860g/sqm ±10%.

10. Primary backing: PP + polyester fiber short-staple & Mesh scrim inlay.

11. Secondary backing: Latex.

Supply & Installation of 50mm Drainage spouts, along the outer perimter, for drainage of storm

water outside the court, as per final approved design.

8 Layer Synthetic Acrylic Sports Flooring :- Supply & Installation of an 8 Layer Synthetic Acrylic

Sports Flooring System, MAPECOAT TNS Cushion by MAPEI, which is a medium elasticity, multi-

layered system made from acrylic resin in water dispersion with selected fillers used to make

playing surfaces suitable for professional level tennis with high resistance to wear, UV rays and

various weather conditions. Suitable for outdoor courts & forms a highly resistant, even playing

surface for safe, high-speed rallies with consistent ball bounce. A maintenance-free, ITF 3 certified

1. Layer 1: Mapecoat TNS Primer EPW/Mapecoat TNS I600 W - A two-component, transparent

water dispersed epoxy – resin based primer. It is recommended for use as an adhesion promoter

for absorbent, porous cementitious/ bituminous substrates.

2. Layer 2 & 3: Mapecoat TNS White Base Coat - Used to prepare cementitious/ bituminous

surfaces before applying the Mapecoat TNS Grey Coat Ultra, to even out the absorbency of the

substrate and to promote a good bond.

3. Layer 4: Mapecoat TNS Grey Base Coat Ultra - A Coarse cushion layer with 1-2mm rubber

granules dispersed in an acrylic medium.

4. Layer 5 & 6: Mapecoat TNS Grey Base Coat - A Fine cushion layer with 0.5-1mm rubber

granules, made from a balanced mix of acrylic resins in water dispersion and selected fillers. It is a

soft, flexible finishing product which, when used in combination with Mapecoat TNS Finish, forms a

durable basecoat finish system for sports surfaces which is safe and comfortable for athletes.

5. Layer 7: Mapecoat TNS Base Colour - The colour base coat.

6. Layer 8: Mapecoat TNS Colour Finish - The colour top coat.

Line marking will be done as per design.

Volleyball Poles and Net :- Supply & Installation of a pair of Volleyball Poles, with antennae and

competition grade nets.

U Saucer Drain :- Supply & Installation of a U Saucer Drain of width 200mm, of reputed brand and

86 make like Basant Betons, on one side of the court, for catching strom water and draining it as per Rmt 24 ₹1,070.60 ₹25,694.40

the desinged slope.

PVC Chainlink Fencing :- Providing and erecting a 15' high, PVC Chainlink Fencing with an MS Frame

of 75mm square section (3mm thickness). vertical pipe erected10' centre to centre and 2' fitted

horizontally at 3 places . Painted with First Quality Enamel Paint, after one coat of Zinc rich Itch

(PU) Primer.Posts will be concreted to a depth of 2' & PVC Chain link will be welded to the poles

and bolted with MS frame. Includes the cost of material, labour, scaffolding, surface preparation

etc., complete as directed and specified.

88 Beach Sand :- Supply & spreading of Standard Beach Sand Cmt 9 ₹4,067.27 ₹36,605.43

HDPE Net Fence :- Supplying, stretching & fixing in position a Garware HDPE Sports Net with 2.5mm

thickness & 50mm mesh size over a MS Frame (Net Colours available are green & black). This will

include the four sides and the roof.

89 MS Frame: The MS Frame will consist of 50mm x 2.5mm vertical round sections with 10' height, Sq.M. 662 ₹823.15 ₹5,44,925.30

and 50mm x 2.5mm horizontal round support sections welded at the top & bottom. The frame will

be painted with a zinc chromate primer and 2 coats of enamel paint, in a colour as per the

approved design.

Preparation of the cricket pitch.

1. Pitch Core: A layer of gravel or crushed rock is added to the base, typically around 100-150 mm

deep. This provides drainage and stability for the pitch.

2. Soil Preparation: A mixture of clay, loam, and sand is then added on top of the gravel layer. The

exact composition of the soil can vary, but it is carefully chosen to provide the desired playing

characteristics.

3. Soil Compaction: The soil is then compacted using a heavy roller to create a dense, firm surface.

This helps to ensure an even bounce and prevents uneven wear over time.

4. Pitch Shaping: The pitch is then carefully shaped and leveled, with a slight convex curve from the

center to the edges. This helps to encourage the ball to bounce evenly across the surface.

91 Supply & Installation of Mexican Natural Grass for the entire Cricket Ground Sqm 6280 ₹338.74 ₹21,27,311.69

92 Providing and fixing outdoor gym equipment as per architectural details

93 Shoulder Twirl each 1 ₹24,745.00 ₹24,745.00

95 Air Walker each 1 ₹24,240.00 ₹24,240.00

96 Double Cross Trainer each 1 ₹29,795.00 ₹29,795.00

97 Sit-up Board each 1 ₹18,180.00 ₹18,180.00

98 Push Up Bars each 1 ₹12,120.00 ₹12,120.00

99 Climbers CL-06 each 1 ₹21,210.00 ₹21,210.00

101 Elegant Dustbin each 10 ₹5,050.00 ₹50,500.00

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) inducing

Seat and cover and soil pipe connection coupling, etc.(A) vitreous China Pattern :(i) in white colour

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

103 concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long Each 4 ₹987.14 ₹3,948.56

pattern = White colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with

104 polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and Each 11 ₹2,370.39 ₹26,074.29

overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and

making good the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing

in pipe line etc. complete.(iii) 32mm dia.

Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanized steel

106 tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and Rmt 11 ₹347.51 ₹3,822.61

closet and making good the walls and floors.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

108 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 11 ₹89.83 ₹988.13

109 Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia. Each 11 ₹88.65 ₹975.15

110 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. Each 23 ₹36.98 ₹850.54

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and

back nuts. (i) 15mm dia.

113 In words: - five crore ninety three lakhs eighty eight thousand eight hundred only Each 11 ₹205.83 ₹2,264.13

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for

115 Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap Each 17 ₹1,074.86 ₹18,272.62

etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.

Providing and fixing chromium plated brass half trunflush cock of approved quality including fixing

in pipe line etc. complete.(i) 20mm dia.

Providing laying and jointing in true line and level 15mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

117 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 19 ₹72.65 ₹1,380.35

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 20mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

118 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 100 ₹80.95 ₹8,095.00

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

119 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 150 ₹91.84 ₹13,776.00

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

120 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 58 ₹119.15 ₹6,910.70

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

121 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 27 ₹148.12 ₹3,999.24

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

122 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 500 ₹195.67 ₹97,835.00

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 65mmdia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

123 clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. Rmt 10 ₹261.09 ₹2,610.90

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Earth Work in Excavation of required width for water supply pipes including excavation for sockets

and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil

and then back filling the soil as required in layer Not exceeding 20 cms in depth including

consolidating each deposited layers by ramming, watering etc. and disposing of surplus excavated

soil as directed within a lead of 100 m. for all kinds of soil.Size : Pipe up to 80 mm dia

125 Providing and filling sand of grading zone V or coarser grade around the water supply pipes and Rmt 1000 ₹202.00 ₹2,02,000.00

about 300 mm above the pipe surface in the external work. Size : Pipe up to 80 mm dia

Providing, fixing, jointing and testing, heavy quality cast bronze / brass ball valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 20 mm dia

Providing, fixing, jointing and testing, heavy quality cast bronze / brass ball valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 25 mm dia

Providing, fixing, jointing and testing, heavy quality cast bronze / brass ball valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 32 mm dia

Providing, fixing, jointing and testing, heavy quality cast bronze / brass ball valves of approved

make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect

and Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 40 mm dia

Providing, fixing, jointing and testing, PN16 rated butterfly valve wafer type double eccentric

130 disc(disc made of ductile iron with rilsan coated / SS 316), with rubber gasket, flanges / unions, Each 3 ₹3,272.40 ₹9,817.20

flange adapters, nuts, bolts, washers, etc. complete, as approved by the Consultant and Engineer-in-

charge for water supply lines of the following Nominal bore (NB) size: 50 mm dia

Providing, fixing, jointing and testing, PN16 rated butterfly valve wafer type double eccentric

131 disc(disc made of ductile iron with rilsan coated / SS 316), with rubber gasket, flanges / unions, Each 1 ₹3,838.00 ₹3,838.00

flange adapters, nuts, bolts, washers, etc. complete, as approved by the Consultant and Engineer-in-

charge for water supply lines of the following Nominal bore (NB) size: 65 mm dia

Providing and fixing CI Air release valve, double acting, of approved make, having 2 chambers with

132 ebonite ball, small and large orifices with isolating stop screw down valve, GM seats, high tensile Each 5 ₹727.20 ₹3,636.00

brass spindle with cap, conforming to standard water works pattern. Flanges as per IS : 15381, flat

faced and drilled, complete of the following Nominal bore (NB) size: 20 mm dia

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including necessary fittings such as bends, shoes

etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(D) 40mm

Providing, fixing, jointing and testing PVC 'P' - traps of self cleansing design with water seal not less

than 50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in

proper condition and shape after placing the trap in right position in case of suspended / open

plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required.

The trap shall be 'P' type, of following sizes: 110 x 75 mm OD inlet / outlet

Providing, fixing, jointing and testing heavy duty, PolyVynile Cloride (PVC) pipes, - 4 kg/cm2

pressure, of Supreme, Prince or equivalent, open, low density, to wall, ceiling and floor, approved

quality, complete, for rain water pipes including jointing with rubbering / solvent / solution and

airtight joints, with necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male

and female), reducer (single stage, double stage and triple stage), end cap, fabricated bend, etc.,

and lubricant or jointing material, including testing, cutting, making good the wall, ceiling and floor

etc. complete of the following nominal bore (NB) size: 110 mm dia

Providing, fixing, jointing and testing heavy duty, PolyVynile Cloride (PVC) pipes, - 4 kg/cm2

pressure, of Supreme, Prince or equivalent, open, low density, to wall, ceiling and floor, approved

quality, complete, for rain water pipes including jointing with rubbering / solvent / solution and

airtight joints, with necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male

and female), reducer (single stage, double stage and triple stage), end cap, fabricated bend, etc.,

and lubricant or jointing material, including testing, cutting, making good the wall, ceiling and floor

etc. complete of the following nominal bore (NB) size: 75 mm dia

Providing and fixing rain water "KHURRAS" size 450 x 450 mm required depth with lead flashing

140 around rainwater pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen. Each 11 ₹2,525.00 ₹27,775.00

Including heavy duty CI grating complete as required.

141 Providing and fixing, PVC cowl, on PVC ventilating pipes and verticals for soil, waste and rain water Each 24 ₹70.70 ₹1,696.80

Pipes at top level / terrace level, as specified and required, etc. complete.

Providing , laying, jointing & testing Foamcore pipe (SN-4) and laid to correct levels below ground in

trenches upto required depth including excavation in all kind of soil (including hard rock),

dewatering, refilling, watering, ramming and removing the surplus excavated material dumping it

142 on site or carting away to lead of 100 meters as directed and making good the same complete as Rmt 100 ₹1,294.82 ₹1,29,482.00

required. Providing and fixing cement concrete 1:4:8, 100 mm thick for bedding and haunches upto

the center of pipe including for joints and other critical areas as directed as per site conditions.Also

pipe to be N casing with sand filling. The pipes shall be of following nominal bore (NB) size:160 mm

Providing , laying, jointing & testing Foamcore pipe (SN-4) and laid to correct levels below ground in

trenches upto required depth including excavation in all kind of soil (including hard rock),

dewatering, refilling, watering, ramming and removing the surplus excavated material dumping it

143 on site or carting away to lead of 100 meters as directed and making good the same complete as Rmt 120 ₹1,678.62 ₹2,01,434.40

required. Providing and fixing cement concrete 1:4:8, 100 mm thick for bedding and haunches upto

the center of pipe including for joints and other critical areas as directed as per site conditions.Also

pipe to be N casing with sand filling. The pipes shall be of following nominal bore (NB) size:200 mm

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

144 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) Each 5 ₹1,246.92 ₹6,234.60

150mm x 100mm size P or R type

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt.

of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. /Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over

item No.46 (I) for depth from 0.9M to 1.5M.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt.

of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. /Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof

over item No.48 (I) for depth from 1.50M. to 2.25M.

Constructing Brick masonry road gully chamber 500mmx 450mm x 600mm including 500mm x

450mm C.I. horizontal grating wih frame complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than

150 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- Each 5 ₹3,660.76 ₹18,303.80

coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with

one or two inlets.

Extra over items 51 for every additional depth of 0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(ii) for 500mm x 700mm size.

Providing, fixing, jointing and testing heavy duty, PolyVynile Cloride (PVC) Perforated pipes with

geotextile for plantation drainage, - 4 kg/cm2 pressure, of Supreme, Prince or equivalent, approved

quality, complete, for plantation drainage including jointing with rubbering / solvent / solution and

geotextile with necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and

female), reducer (single stage, double stage and triple stage), end cap, fabricated bend, etc., and

lubricant or jointing material, including testing, cutting, making good the wall, ceiling and floor etc.

complete of the following nominal bore (NB) size: 750 mm dia

Providing & erecting Submersible type horizontal mono block pump set with stainless steel body

having following specification (For tank filling)

153 (A) 0.2 H.P. single phase open well motor pump set having discharge of 100 LPM @ 25 mtr. head Ea. 1 ₹15,150.00 ₹15,150.00

suitable for 32 mm dia. delivery pipe with control panel

Providing & erecting Submersible type horizontal mono block pump set with stainless steel body

having following specification (for garden water supply)

(A) 0.2 H.P. single phase open well motor pump set having discharge of 150 LPM @ 25 mtr. head

suitable for 50 mm dia. delivery pipe with control panel

Supply installation, testing and commissioning of water cooler 40/40 having stainless steel body &

tank with storage 40Ltrs. & colling capacity 40 Ltrs. Per hour

RO Plant 50 LPH (Liter per hour) PLANT CAPACITY -

Treated Water Quality

Turbidity : <1NTU

Chlorides : < 10 ppm

Sulphates : < 5 ppm

TDS : < 150 ppm

500L STORAGE TANK AND DRINKING FOUNTAIN

Supply, fitting and fixing PVC water storage tank of approved quality with closed top with lid.

(Black) Multi layer.(commentry box Buliding)

Supply, fitting and fixing PVC water storage tank of approved quality with closed top with lid.

(Black) Multi layer.(Public Toilet Buliding)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M.

size having weight not less than 35Kg

161 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials Cmt 222.5 ₹122.94 ₹27,354.15

and disposing off the excavated stuff upto 50 Meter lead.-any kind of soil

162 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful Cmt 33 ₹136.30 ₹4,497.90

materials and disposing off the excavated stuff upto 50 Meter lead.-any kind of soil

163 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in Cmt 59.5 ₹136.92 ₹8,146.74

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

164 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation Cmt 21 ₹2,769.69 ₹58,163.49

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in

position complete upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of

166 formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of Cmt 87.5 ₹4,330.79 ₹3,78,944.13

columns and Mass concrete.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm

167 x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse Smt 57 ₹1,488.24 ₹84,829.68

sand) & jointed with white cement slurry.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick

168 walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar Smt 44.76 ₹180.40 ₹8,074.70

1:3 (1-cement:3-sand)

Providing and fixing medium duty perforated rcc cover for 300 mm and 450 mm wide storm water

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2

watering and laying (to level or slopes) of class NP3 of following internal daimeters.(i) 300mm dia.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in C.M. 1:2

watering and laying (to level or slopes) of class NP3 of following internal daimeters.(ii) 450mm dia.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected

with necessary connections as per site situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

180 [A] For One Gang

181 [B] For Two Gang

182 (4) TV Co-axial Socket outlet

183 (7) Blank Plate Single

184 (8) Computer RJ-45 socket

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes.

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof confirming BS with necessary end caps Internal and

external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following

(1) 75 mm x 50 mm trunking Mtr. 10 277.75 ₹2,777.50

Providing & Erecting eight module pop up floor box/flushed with table surface Conform to IEC

188 60670-1, IEC 60670-23 & IEC 60884-1 with required items as demanded by engineer in charge with Ea. 2 1544.29 ₹3,088.58

complete finishing .cat-III

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of

mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of screed

water with all accessories,Junction Box,Joints as required and demanded by engineer-incharge and

laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following

size of dimensions and No of compartments (W x D x T) Cat-III

[2] 75mm x 25mm x 1.6 mm with One Compartment Mtr 10 377.74 ₹3,777.40

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity

of following size

(A) With medium class Rigid PVC pipe and accessories

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

193 connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

(iii) 16-20 watts, Surge-2 KV

(iv) 22-24 watts, Surge-2 KV

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Ea. 25 312.09 ₹7,802.25

System Wattage: 12-15W, Driver Integral: Constant Current

Input Voltage: 230-240Vac, Frequency: 50-60 Hz

Operating Voltage: 100-277VAC, Operating Temperature: -10°C~+50°C

CRI (Ra): >80, LED Colour Temperature: 3000K/4000K

Power Supply: Integral, Power Factor: >0.95, THD: <10%, Surge Protection: 2.5KV, Efficiency: >85%

Colour Temperature: 3000K, Luminous flux: 840 lm at 3000k, Beam Angle: 10/25/40

Body: Die-cast Aluminium Alloy, Diffuser: Clear Tempered Glass with IK08 Mounting: Spike / Die-

cast Aluminium Bracket

Finish: Graphite IP66, IK08, Life: 60,000 hrs

Dimension: 150*310*88 mm

The luminaire is BIS & CE certifications. (NOTE: Final light fixture, light fixture Model, light fixture

selection & it's colour, light Colour Coding Temperature, Fixture sample is to be done and approved

by the architect and Engineer incharge after sampling and mock-up before finalization.)

System Wattage: 9 to 12W LED, Driver Integral: Constant Current

Input Voltage: 230-240Vac, Frequency: 50-60Hz

Operating Voltage: 100-277Vac, Operating Temperature: -15°C~+50°C

Light Source: NICHIA/osram/cree LED Lumens: 1000 lm

CRI (Ra): ≥80, LED Colour Temperature: 3000K / 4000K / 5700K

196 Power Supply: Integral, Power Factor: ≥0.95, THD: <10%, Surge Protection: 2.5KV, Efficiency: >85% Ea. 160 4399.56 ₹7,03,929.60

Colour Temperature: 3000K,4000K, Luminous flux: 656 lm, Light Distribution: Asymmetrical

Body: Die-Cast Aluminium, Diffuser: Clear Polycarbonate, Gasket: EPDM, Mounting: Wall - Surface,

IP65, Life: 60,000 hrs

Dimension: 240 x 83 x 70mm.

IP66, IK04, Life: 60,000 hrs

Finish: Graphite Grey/Anthracite Grey/Jet Black with MARINE COATING.

The luminaire is BIS & CE certifications (NOTE: Final light fixture, light fixture Model, light fixture

selection & it's colour, light Colour Coding Temperature, Fixture sample is to be done and approved

by the architect and Engineer incharge after sampling and mock-up before finalization.)

SUSPENDED LIGHT Supplying and erecting LED

outdoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA powder

coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with

company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 4000K, Uniformity ratio >0.7,

Luminaireefficacy> 100 lumens/watt

LED driver efficiency > 85 %, Sample and Colour Temperature of fixture to be approved from

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire.

( fitting required LM-79 & LM-80 Certificates) (NOTE: Final wattage capacity, light fixture colour,

light Colour Coding Temperature, Fixture sample is to be done and approved by the architect and

Engineer incharge after sampling and mock-up before finalization.)

Tentative Dimension: Ø=130mm, H=200mm

25-30W LED Suspended (down) light point, IP65

Supply & Erecting of 500W LED Flood Light 45DEG BEAM ANGLE

LEDLifeCycle:50000Hours

LEDMake:OSRAM/SAMSUNG/EQUIVALENT

LEDEfficacy:201Lm/W

198 LEDColour:White Ea. 1 33355.25 ₹33,355.25

CCT:5500°Kto6500°K BeamAngle:45Degree

Opera ngTemperature:-10°CTo+50°C

InputVoltage:230VAC,50Hz

DriverIntegrated:Yes

Housing:AluminiumHeatSinkandMSwithPowder Coated Brackets

LensMaterial:Borosilicate

Supply & Erecting of 500W LED Flood Light 60DEG BEAM ANGLE

LEDLifeCycle:50000Hours

LEDMake:OSRAM/SAMSUNG/EQUIVALENT

LEDEfficacy:201Lm/W

LEDColour:White

CCT:5500°Kto6500°K BeamAngle:60Degree

Opera ngTemperature:-10°CTo+50°C

InputVoltage:230VAC,50Hz

DriverIntegrated:Yes

Housing:AluminiumHeatSinkandMSwithPowder Coated Brackets

LensMaterial:Borosilicate

Supply & Erecting of 500W LED Flood Light 15DEG BEAM ANGLE

LEDLifeCycle:50000Hours

LEDMake:OSRAM/SAMSUNG/EQUIVALENT

LEDEfficacy:201Lm/W

LEDColour:White

CCT:5500°Kto6500°K BeamAngle:15Degree

Opera ngTemperature:-10°CTo+50°C

InputVoltage:230VAC,50Hz

DriverIntegrated:Yes

Housing:AluminiumHeatSinkandMSwithPowder Coated Brackets

LensMaterial:Borosilicate

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection.

202 (i) above 36 to 48 watts

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection.

(vii) above 200 to 250 watts

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

205 capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 20946.39 ₹20,946.39

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection

suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all internal connections & complete erected in

existing M.S.housing..

207 Providing and erecting following additional parts for panel mounting MCCBs

(A)Extended operating rotary handle with pad lock with three position trip,off,on suitable for 25A

to 250 A panel mounting cat-III

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with

four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. capacity Rn.Mtr 2 1469.55 ₹2,939.10

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor

type cubical panel board necessary IP-42 and above protection as per approval from engineer

209 incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments,

210 earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved

(ii) with 550 mm. Depth Sq.Mtr 2 19387.96 ₹38,775.92

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor

type double door cubical panel board necessary IP-54 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved

(i) with 350mm depth Sq.Mtr 5 16323.62 ₹81,618.10

Providing and erecting multifunctional meter suitable for application of Power monitoring and

showing measurement of following Voltage, Frequency, Apparent energy, Apparent power, Active

and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand power PM,

QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor

and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent

energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3,

Phase currents, Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3,

Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC,

Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Supplying & erecting approved make Four Pole 415V Motorised Automatic transfer switch including

controller with UV/OV, phase sequence, single phasing and frequency protection interior for panel

mounting with operating mechanism A.C.23A duty confirming to IS for

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

215 A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

216 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

217 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp.

218 Half / One Module Blanking Plate of Standard Size. Ea. 34 9.09 ₹309.06

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

220 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP ₹0.00

(ii) 40Amps. DP

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper clamp.

222 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Kg. 700 77.77 ₹54,439.00

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

223 necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & Ea. 20 823.15 ₹16,463.00

connected as directed (For panel)

224 For using salt and charcoal / coke as required for pipe type earthing. Ea. 20 171.7 ₹3,434.00

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

226 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for

227 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cable.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

228 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for

229 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables.

230 Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 Ea. 5 240.38 ₹1,201.90

cm. Flushed with ground in cement foundation as directed by Engineer in charge.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below ground / road surface for enclosing

(A)50 mm outer dia Mtr. 1200 62.62 ₹75,144.00

232 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables.

Providing and, fixing heavy duty flange type brass double compression type cable gland with

233 rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for

following size of cables.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

234 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

235 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free

3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding,

Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and

all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge]

237 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly Mtr. 20 108.07 ₹2,161.40

painted for fan complete with proper insulation without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm

239 length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected Ea. 20 108.07 ₹2,161.40

concealed in Ceiling with necessary finishing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with

necessary hook of 10 mm M.S. Round Bar.

241 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea. 20 18.18 ₹363.60

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II Ea. 20 1703.87 ₹34,077.40

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm

sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible

Core plug top complete erected with lead wires as directed.

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Long duly painted

with two coats of aluminium paint complete with metallic base plate of 300 mm x 300 mm x 4mm

thick for using as a compound light pole with approx. weight 32 Kg.

Supplying and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and

245 having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded

stiffener reducer and with lock nut complete painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of

(A) Single Arm bracket 2 Mtr Ea 5 728.21 ₹3,641.05

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP ports Advanced L2 switching and security

features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user

interface 65W PoE budget [Approved by Competent Authority i.e. not Below the rank of Executive

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2

switching and security features L2+ Static Routing Optional “standard mode” or “surveillance

mode” management user interface 193 W PoE budget [Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supply, Installation, Testing & Commissiong of 4 MP IR Dome Camera (ceiling/ wall mounted) 1/3″

Megapixel progressive scan Exmor CMOS, Infrared, Dome camera with D/N ICR, IR, varifocal lens,

2.8mm-12mm, F1.6, without Audio, H.265, IP4x rated 1080p @ 25fps, H.265: 4–8192 kbps,

BLC/HLC/DWDR, IR distance up to 30m, RJ-45 connection, Inbuilt microSD card slot,

BLC/HLC/DWDR, 3D DNR, ROI, ONVIF, PoE Complete as per specification, IP4X, IK08, Including

necessary accessories for mounting.

Supply, Installation, Testing & Commissiong of IR bullet camera having, 3 MP and Full HD 1080p

(25/30 fps) image with 1/3" 4MP sensor without audio, IR LEDs provide up to 100 ft (30m) of

illumination, 2.7–12 mm F1.4 motorized focus/zoom lens; BLC/HLC/DWDR, 3D DNR, H.265

(Main/High/Baseline Profile) MJPEG, RJ-45 (10/100Base-T), microSD (128 GB), PoE (802.3af),

12VDC, ONVIF, IP66, IK 10 Including necessary accessories for mounting including pole.

Deisgn, Supply, Installation, Testing & Commissioning of 32-channel network video recorder (NVR),

Real-time recording: up to 256 channels 1080P @ 2Mbps, Up to 128 channels 1080P @ 4Mbps,

253 Operating System LINUX, H.265, H.264 high quality decoding, RAID-0/1/5/6/10 support, N+1 Ea. 1 151500 ₹1,51,500.00

redundancy, motion detection, 3 USB 2.0 ports, USB storage device, 2 RJ-45 port, 1 RS-232, Hot

swap, 24 bay HDDs, up to 144TB storage, Support ONVIF Profile S, HTTP/HTTPS, TCP/IP, RTSP, UDP,

NTP, HTTPS, DHCP, IP Search protocols can support

254 Supplying, installation, testing and commissioing of 8 TB Surveillance HDD Ea. 1 26260 ₹26,260.00

255 Supply, Installation, Testing and Commissioning of 55" LED Display, 1920 X 1080 Resolution, 450 Ea. 1 69690 ₹69,690.00

CD/M2 Brightness, Wall Mounting Bracket with windows 10 professional

256 Supply, Installation, Testing & Commissioning of Indoor Smart Wi-Fi Access Point. Ea. 6 12625 ₹75,750.00

Supply, Installation, Testing and Commissioning of Rack 27U(600 x 600 mm) - Floor mount With

Standard Accessories

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED

258 display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc Ea. 10 1275.63 ₹12,756.30

.with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC

erected on existing panel board with all connection, wiring etc .with manufacturers calibration

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on

existing panel board with necessary connections.

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

Supplying & erecting directly operated single phasing preventer complete erected and connected

to supply up to 45 Amp. Range.

Say Total ₹4,88,40,138.00

I / We am / are willing to carry out the work at __________% above / below __________

percentage (should be written in figures and words) of the estimated rates mentioned above.

Amount of my/our tender works out as under.

Estimated Amount put to

Deduct _________ % Below.

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

Notes 2 - All the columns in Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

Notes 4 - To be continued on additional sheets, if found necessary .