Installation of 05 (five) nos. Mini Deep Tube well with Submersible Pump in different places under Ward No-07, AMC

Drilling and boring of pilot hole in any strata by manual means, collection of soil sampales of different strata met with during drilling at various suitable levels and preservation of samples in plythene bags / sample boxes and disposal of excess soil or mud including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer In Charge. (A) 100 mm dia.

Reaming of pilot hole to an enlarged bore hole in any soil starta by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge, A) From 100 mm dia pilot hole to 250 mm bore hole

Providing and fixing of UPVC end cap suitable for UPVC'CM" casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, i) 100 mm dia

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,i) 150 mm dia

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,ii) 100 mm dia

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. B) RS pipe i) 100 mm dia

Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, ii) 150x100 mm dia

Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge.

Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75) mm effective size) as per specifiation (IS:4097) using deep drilling rig and direction of the Engineer-in-charge, A) with contracor's high power rig i) with pea gravels obtained from Durgapur, West Bengal.

Fabrication of column pipe including providing &fitting fixing of G.I. flange by cutting the G.I pipe into 3.05 mtrs.size and welding the same with GI flange as per specification and direction of the Engineer-in-charge. (GI pipe will be issued by the Department at free of cost) i. For 50 mm dia GI pipe with 10 mm thick GI flange.

Providing and fitting fixing with PVC insulated 3 core flat copper cable conforming to relevant IS code for Submersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i.2.50 sq mm.

Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses) triple pole with natural link (TPN) 415/500 Volt, L&T/Havells/BCH make etc. Complete as per specification and direction of the Engineer-in-charge.

Supplying and installation of water lubricated submersible pump having ISI marked of capacity 2000 GPH at total head up to 60 mtr. Cuple with submersible motor 2 HP suitable for 240 voltas (+10% variation single phase 50 HP, AC supply DOL starting method to run at 2880 RPM along with 35 mtr 2.5 sqm. PVC insulated 3 (three) core flate copper cables including fitting fixing and lowering if with 40mm dia GI pipe up to 100 FT (30,00 mtr) etc. complete as per direction ofthe Engineer-in-charge (40 mm dia GI pipe and fitting will be paid separately)

Supplying and installation of water lubricated submersible pump having ISI marked of capacity 2000 GPH at total head up to 60 mtr. Cuple with submersible motor 2 HP suitable for 240 voltas (+10% variation single phase 50 HP, AC supply DOL starting method to run at 2880 RPM along with 35 mtr 2.5 sqm. PVC insulated 3 (three) core flate copper cables including fitting fixing and lowering if with 40mm dia GI pipe up to 100 FT (30,00 mtr) etc. complete as per direction ofthe Engineer-in-charge (40 mm dia GI pipe and fitting will be paid separately)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist 15 slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and writing the required details on the reflective signboard for the complete job as per direction of Engineer-in-charge.