CERTAIN BR WKS TO VARIOUS BLDGS OF POCKET E UNDER AGE BR I OF GE ARMY BHUJ

Amount

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc including wall tiles, raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection etc and finished even without using extra cement, complete all as specified and directed.

M&L Virified Ceramic tiles Dark shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

All as above Item No 10 but on vertical surface as in skirting/Dados over 10 mm thick plaster cm 1:4 complete all as specified and directed.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy on vertical surfaces such as skirtings, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M & L for glazed coloured white tiles of size 450x300x 7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window / ventilator with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F for 35 mm thick 2nd class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc. edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . sizes of members of shutters as specified in SSR-I , section-8, clause-8.24(a); supplied and fitted to chowkats, complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading., supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S&F 30 mm thick flush shutters,solid core construction,with partical board core and covered with decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Co mposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgen polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 100 mm stainless steel extruded (ISI Marked ) butt hinges complete all as specified and directed.

S&F for 75mm stainless steel extruded (ISI Marked ) butt hinges complete all as specified and directed.

S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for 150mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed.

S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 4 mm thick Plain sheet glass, ordinary quality and glazing with oil putty/ beading in square exc. 0.5 sqm in each pane complete all as specified and directed.

S&F for Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F for 4 mm thick figured glass, pin headed type and glazing with oil putty/beading in squares n exc 0.5 sqm in each pane, complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc complete all as specified and directed.

S&F for Galvanised stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

S&F in repair Galvanised stainless steell wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement) on internal wall surface, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces to brick work or Block masonry surface in CM 1:4 finished the surface even and smooth (without using extra cement on internal wall surface, complete all as specified and directed.

M & L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper, white or tinted, over 2mm coat wall putty complete all as specified and directed.

M & L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified and directed.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer, complete all as specified and directed.

M & L for Preparation of new galvanised steel surfaces of any description not otherwie described, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer and over a coating of mordant solution including washing the surfaces, complete all as specified and directed.

Dismantling Prelaminated particle boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick plain single colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cub board shutters/selves and the like, etc complete all as specified and directed.

S&F for 75 mm hasp and staple, safty type, aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete incl Dismantling water tanks and all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and dismantling existing water tank of any capacity and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 litres capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete incl Dismantling water tanks and all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and dismantling existing water tank of any capacity and removing from site complete all as specified and directed.

S&F in repair for vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flushing pipe), including connection to trap and to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor complete all as specified and directed.

S&F in repair for 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified and directed.

S&F in repair for Vitreous china wash basin, white, flat back, size 550 X 400mm excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repair waste coupling 32mm CP for glazed ware sinks, basins etc with long screwed sha k or fly nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair Stainless steel curtain rods 25mm dia fancy type with required supports, and open/end brackets complete all as specified and directed.

S&F in repair for Pillar tap for 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with or withou lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes complete all as specified and directed. (Make-Prayag/Cera/Kohler)

S&F in repair for bib cock CP for 15mm bore fancy type, cast copper alloy, screwed down, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed. (Make-Prayag/Cera/Kohler)

S&F in repair for CP Stop cock / angle volve 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 15mm bore fancy type and fixed in repairs complete all as specified and directed.(Make-Prayag/Cera/Kohler)

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

S&F in repair for ball brass valves, size 15 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. (Make Prayag/Polytuff/Pearl)

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) Nahani trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F (concealed / open) 40 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing water proof laminated gypsum ceiling board of size 600x600x 8 mm thick complete all as specified and directed and fixed as per manufacturers instructions complete all as specified and directed.

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.(Note : Making all edges i.e. cill and jamb good by cement mortar 1:3)

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed.

S&F in repair brass 4 Levers Mortice lock, vertical type size 100 mm, complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F in repair aluminium door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.

Disconnecting existing tanks, 250/ 500/1000 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position and making connections with existing water supply line complete all as specified and directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc complete all as specified and directed. ( NOTE ;- Taking down also include in this rate)

M&L Rendering 10 mm thick in CM(1:3) rendering on roof surfaces complete as all specified and directed.

M & L for PCC(1:2:4) as in levelling course on roof surfaces complete all as specified and directed.

Dismantilng wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Steel work in tubular trusses, Pillars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240 ,complete all as specified and directed.

M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and directed.

Demolitionof reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided as in RCC Jalies , louvers etc and similar suspended work and removing from site complete all as specified and directed.

M&L for 35mm thick Pre Cast Cement concrete louvers and jallies 1:2:4 type B0 using 12.5 mm graded stone aggregate (measured solid) including all mounding but excluding frame and set in CM 1:4 complete all as specified and directed.

Demoltion of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Machine pressed rubberized precast conrete interlocking paver block any shape and size connfirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey pigment complete all as specified and directed.

M & L for Sand cushioning 25 mm thick for interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40 mm graded aggregate ) for receiving floor finishes complete all as specified and directed.

Dismantling of PVC drain pipes of internal dia 100mm jointed in cement mortar and taking out of treanches/fixed to wall complete all as specifed and directed.

Dismantling of PVC drain pipes of internal dia 75 mm jointed in cement mortar and taking out of treanches/fixed to wall complete all as specifed and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 110mm bore of pipe (fixed in repair) complete all as specfied and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ceiling, floor etc 75 mm bore of pipe (fixed in repair) complete all as specfied and directed.

S&F PVC (SWR) bends of any radius for 110 mm bore pipe (fixed in repair) complete all as specifed and directed.

S&F PVC (SWR) bends of any radius for 75 mm bore pipe (fixed in repair) complete all as specifed and directed.

S&F PVC (SWR) branch pieces(single Y) equal or unequal of 110 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(single Y) equal or unequal of 75 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(Double Y) equal or unequal of 110 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) branch pieces(Double Y) equal or unequal of 75 mm bore and fixed complete all as specifed and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 110 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (double T) equal or unequal of 110 mm bore pipe and fixed complete all specifed and directed.

S&F PVC (SWR) junction single (double T) equal or unequal of 75 mm bore pipe and fixed complete all specifed and directed.

Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to aluminium section weighing not less than 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. and renew unserviceable items such as fittings, sections, glass, Solid PVC sheets etc complete all as specified and directed.

M&L for 18-20 mm thick granite (Jet Black) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

S&F in repair 15mm bore bib taps cast copper alloy, chromium plated fancy type ISI marked with crutch or butterfly handle screwed down screwed for iron pipe or for union and fixed complete all as specified and as directed.(Make : Jaquar/Kohler/ Cera)

S&F 15mm bore CP brass angular cock screwed for iron pipe or ferrule and fixed complete all as specified and as directed.(Cart Part No: VGP81053 Make : Jaquar)

S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockros all as approved sample all as specified and directed.

S&F Tubular towel rail, brass chrominum plated 20 mm dia D type 60 cm long between flange complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner with chromium plated bracket guard and with chromium plated bracket guard and railing 6" dia fixed with screws complete all as specified and directed.

Supply and fix PVC bathroom cabinet of size 50cmx41cm with hinged door an locking arrangement with built in shelves and looking mirror fixed in cabinet door and fixed to wall as per manufacturers instruction as in repairs complete all as specified andas directed. (Make : Jaquar/ Cera)

S&F in repair Chromium plated toilet Roll paper holder standared quality complete all as specified and directed.(Cart Part No:CAN-11151 N Make : Jaquar)

S&F health foucet with 1200 mm long flexible mild steel tube with wall hook complete all as specified and as directed.Cart Part No: ALD 573(Make : Jaquar)

S&F Ceramic White Thin Rim Table Top Wash Hand Basin Rectangular shape of size 530mm X 420mm X 140 mm,CP waste coupling, PVC connection and fixed in repairs complete all as specified and directed. JDS-WHT-25907N (Make : Jaquar)

S&F Single Lever Tall Boy with 150mm Extension Body fixed spout without popup Waste System with 600mm Long Braided Hoses complete all as specified and directed.(Cart Part No:opp-15005BPM Make : Jaquar)

S & F of Corner Glass Shelf (with Bracket) CAT NO ACN-1173 JAGUAR or equivalent incl all fittings and accessories complete all as specified and directed.

M&L for welding in repairs n.exc. 2.5 cm in length and n.exc. 6mm thick, complete all as specified and directed.

M&L for preparation of old decorated surface and applying one coat of white wash on walls , complete all as specified and directed.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on Ceiling complete all as specified and directed.

M & L for preparation of old decorated surface and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L existing treatment on walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M& L for preparation of old decorative surface of wall and applying one coat of acrylic weather proof paint (Exterior grade) Complete as all specified and directed.

M & L for existing treatment on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

M& L of Preparation of old decorated surfaces and applying one coat of Terracota Paint on Floor and Wall Surfaces complete as all specified and directed.

M& L for applying Cement putty of 1-2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed.

M&L for preparation of old decorated surface of kerb stones and applying one coat of Enamel paint complete all as specified and directed.

Preparation of old plasteres/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint complete all as specified and directed.

Prepartion of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old steel surfaces of any description not otherwie described, over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions complete all as specified and directed. (Make : Rajshree plasticwood )

All as per Above item no 138 but 18 mm thick plain cheluka plywood complete all as specified and directed.

All as per Above item no 138 but 12 mm thick plain cheluka plywood complete all as specified and directed.

All as per Above item no 138 but 05 mm thick plain cheluka plywood complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and directed.

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

M & L for tank cleaning of PVC or RCC (1000 ltr) overhead water tank and mentioning date of cleaning by paint or marker etc complete all as specified and directed. (Note:- It include material required like cloth ,chemical ,water to rinse etc)

M & L for tank cleaning of PVC or RCC (500 ltr) overhead water tank and mentioning date of cleaning by paint or marker etc complete all as specified and directed. all as specified and directed. (Note:- It include material required like cloth ,chemical ,water to rinse etc)

S & F in repairs of Syphon Set in vitreous china Two Piece European Water Closet Flush tank incl all necessary accessories complete all as specified and directed.

S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110 mm as approved complete all as specified and directed. (Make : Jaquar/Kohler/ Cera)

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

machine vision plus (BID ID -3364890)

M/s Bombay Novelty Stores (BID ID -3362799)