SPECIAL REPAIR TO ROADS OF 183 (I) FD WKSP COY (OLD LOC) BDE GUEST ROOM AND CERTAIN LOC AT MIL STN BHUJ UNDER GE(ARMY) BHUJ

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm deep and area not exc. 100mm deep area exc 400 Sqm all as per specified and directed by Engr-in-Charge.

Material and labour for preparing Unsurfaced Water bound macadam surfaces by wire brushing for removing caked mud etc , sweeping with brooms and finally fanning cleaned surface with air compressor to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer @ 7.50 Kg/ 10 Sqm of surface using paving bitumen complete.

Material and labour for n exc 75mm thick bituminous,macadam laid/rolled and compacted to by using 8 to 10 tonne power road roller to required camber and gradient (consolidated thickness 75mm or less) using Hot mix plant & mechanical paver with @ 4% (paving bitumen (VG-30) grade) binder content by weight of total mix,rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and directed.

Material and labour applying evenly a tack coat of cationic Bitumen emulsion (RS-1) conforming to IS : 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge works 2013,using mechanical sprayer after cleaning of existing surface as specified and directed.

Material and labour for laying and consolidating bituminious premixed asphaltic semi dense concrete,30 mm consolidated thickness with 5.5% binder content by weight of total mix by using paving bitumen (VG 30 Gde) any penetration rolled and compacted to required camber and gradient etc. with mechanical paver and rolled with 8-12 tonne power roller and all as specified and as directed by Engr-in-Charge.

Material and labour for preparing bituminous surfaces of road and applying road marking paint 2.5mm thick width n exc.15cm with hot applied thermo plastic road marking paint like stop lines, dashes,arrows etc of approved colour conforming to BS 3262-1989 with 20% glass beads (intermixed) spread and laid by automatic mechanical machine engine at approx temperature of 160 degree celsius with special applicator machine all as per manufactures instruction complete all as specified and directed .

Supply and fixing in reapirs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model Number DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 60mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 Watt, one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of six super bright LED with 10,000 mcd to 18,000 mcd completed ad per manufacturers instructions including taking out old cat eyes and removal from site etc all as per specified and as directed.( Make: Darkeye,3M, OSCAR, BP)

Demolition of Cement concrete of any description and in any position (unreinforced) in ground floors/paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Material and labour 100 mm thick plain cement concrete type D2 1:4:8 (using 40mm grade stone aggregate) as in sub base complete all as specified and as directed by Engr-in-Charge.