CA NO CWE HILLS RKT 51 OF 2018 19

Amount

Taking down cement plaster from old brick/ stone masonry walls /ceiling brick after plaster etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, precast PCC block masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M& L for 15 mm thick plastering in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement on brick/stone/concrete surface complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately in respective item of BOQ

Supply only integral water proofing compound, complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 Sqm but n. exc. 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down door shutter of any description exc. 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F, 40 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F 30 mm thick (Batten thickness) 2nd class hard wood (SAL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.

S & F, mild steel work as in flat iron bands, straps, supports or stays for rain water, ventilating pipes including bolts clamps, hold fasts, wall ties, hooks for hanging fans and other similar small article confirming to Fe-290 Grade E-165 with and including necessary nuts, bolts, washers, screws etc. as required complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, treating end of post, backs of chowkats etc area tarred exc 0.1 Sqm but not exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, treating small articles such as holdfasts area not exc 0.1 Sqm complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, heavy weight cold rolled complete all as specified and directed.

S & F 75 mm long mild steel butt hinges, heavy weight cold rolled complete all as specified and directed.

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

S&F, 2nd Class hard wood (SAL) plain fillets, square, rectangular or triangular in section, sectional area exc 13 Sqcm but n.exc 25 Sqcm, wrought and fixed with screws complete all as specified and directed.

Dismantling timber scantlings as in framed work 40 sq. Cm and over in section complete all as specified and directed.

S & F 2nd class hard wood (SAL) scantling, wrought in any position and any description as in framed work complete all as specified and directed.

S & F Second class hardwood (SAL) 25 mm thick boarding Planed one side, with butt joints and fixed with nails in roofs, ceiling, partition, fascia, soffits etc (except flooring and skirting) complete all as specified and directed.

Fixing only 25mm thick boarding any description with and including all necessary fixing arrangement as in roofs, ceiling, partition, fascia, soffit etc. (except flooring and skirting) complete all as specified and directed. NOTE: - OLD BOARDING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

Hacking out old broken glass (any thickness, size, quality or description) exc 1.50 sqm from wooden/ metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Demolition of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F PVC 10mm thick hollow PVC wall/ceiling panelling as design and pattern including all necessary framed work as per manufacturer's instruction make as approved by GE complete all as specified and directed. Make:- Armstrong/indian Gypsum/Everest Industries

S & F powder coated GI frame work for seamless ceiling grid of size 605 X 605 mm comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. Make:- Armstrong/Ramco Industries

S & F of 4 mm thick non-asbestos fibre cement building board (E board classic), fixed or laid / inserted to timber / GI / Aluminium framework with screws as in ceiling complete all as specified and directed. Make:- Armstrong/Ramco Industries

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.

S & F of anodised aluminium powder coating window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as one No. 150 mm long peg stay, (01 Nos), 100 mm size B-21 type hinges (02 Nos), suitable size handle (01 No) etc. complete all as specified and directed.

S & F anodised aluminium door shutters, powder coated of any colour (minimum thickness of powder coating 50 micron) aluminium sections weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber packing, handles 2 Nos in each door, hinges anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F solid PVC panel 10mm thick fixed in aluminimum frame with including necessary joining cleats, glazing clips, rubber packing anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F frosted or obscured glass sheet 4mm thick of ordinary quality & glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, backing plaster, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 etc. complete all as specified and directed.

M & L for glazed ceramic colour tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as in skirting/dado over 10mm thick cement plastering in CM 1:4 complete all as specified and directed.

M & L for vitrified ceramic coloured tiles light shade 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

All as per item No 44 above but on vertical surfaces over 10mm thick cement plaster in CM (1:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

Dismantling of water tank exc. 500 Litre but not exc. 1000 Litre capacity complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene three layered water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F 15 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 25mm dia drapery rods with PVC coating and matching rings minimum 08 Nos in per RM with both side fixing bracket and fancy piece both side of rod complete all as specified and directd, Make : Vista or as approved by GE.

Taking up or down steel water tubing and connection including cleaning for refixing with all fittings for 15mm bore GI tubing complete all as specified and directed.

Taking up or down steel water tubing and connection including cleaning for refixing with all fittings for 20mm bore GI tubing complete all as specified and directed.

Re-fixing of 15 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) complete all as specified and directed.

Re-fixing of 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed.

S & F 15 bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Taking down soil/waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. Including cleaning or refixing or removal to store complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius provided with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) branch piece, single (Single ‘Y’) equal or unequal with acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) branch piece, double (Double ‘Y’) equal or unequal with acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal with acess door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F PVC (SWR) ‘P’ trap 110/100 mm bore complete all as specified and directed.

S & F in repair vitreous china wash basin white, flat back, size 550 X 400 mm excluding taps, waste, chain and plug but including brackets, cutting for and pinning in as required complete all as specified and directed

S & F of 32 mm size waste fitting, brass, chromium plated for glazed ware sink, basin etc. with long screwed shanks and fly-nuts, flange end, bedded in red lead cement and other end fixed complete all as specified and directed.

M & L for rubber or vulcanite plugs (waste) with rings and fitting and fixing brass union 32 mm dia complete all as specified and directed.

S&F PVC waste pipe 32mm dia 600mm long for WHB and kitchen sink complete all as specified and directed

S & F PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and with 32 mm dia PVC for low level cistern complete all as specified and directed.

S&F in repairs 20 mm dia brass chromium plated, tubular towel rail, D type , 60cm long between flange complete all as specified and directed.

S & F in repair 125 mm dia grating doom with waste hole of PTMT (minimum weight 40 gram) complete all as specified and directed.

S&F in repairs vitreous china water closet padestal pattern (White) excluding fixing bolts, flushing cistern and flush pipe and including EWC sheet cover complete all as specified and directed.

S&F CP Jet spray for EWC with complete fitting all as specified and directed. Make:- Jaguar or as approved by GE.

S&F CP wall mixer complete all as specified and directed. Make:- Jaguar and as approved by GE.

S&F CP central hole basin mixer fancy type 15mm dia complete all as specified and directed. Make:- Jaguar or as approved by GE.

S&F CP bib tap long body fancy type 15mm bore screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaguar or as approved by GE.

S&F in repairs CP angle valve 15mm dia complete all as specified and directed. Make:- Jaguar or as approved by GE.

S&F in repairs CP brass soap dish complete all as specified and directed. Make:- Jaguar or as approved by GE.

S&F CP toilet paper holder complete all as specified and directed. Make:- Jaguar or as approved by GE.

S&F wall corner 3 Nos in each set complete all as specified and directed.

Taking down and refixing Geyser with fixing arrangement and 02 Nos PVC connection 15mm size with PTMT nuts of 450mm length heavy duty for hot water complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of 450mm length complete all as specified and directed.

S & F 20 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S & F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap with grade of zinc coating 275 gms/sqm fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers etc. complete all as specified and directed.

S & F in repairs 150 mm dia galvanised mild steel sheet eaves, gutter, made of 1 mm thick sheet having zinc coating @120 gms as per sqm conclusive of both sides, half round with rounded edges complete all as specified and directed.

S & F in repairs 150 mm dia galvanised mild steel sheet angles (internal or external) or nozzle pieces (outlets) made of 1 mm thick sheet having zinc coating @120 gram per sqm inclusive of both sides complete all as specified and directed.

S & F of 0.80 mm thick plain galvanised mild steel (PGI) sheets as in ridges, hips, valley gutters, drip, straight flashing (lenght and girth as fixed with grade of zinc coating 275 gms/sqm) complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description exc. 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of existing roof treatment of brick tiles or terracing tiles, single layer etc and removing all the debris to a distance not exceeding 100 meters compete all as specified and directed.

Roughening surface of old concrete slab and sunken floor by picking, sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3 Kg/Sqm over cleaned surfaces complete all as specified and directed.

M & L for providing plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) with water proofing compound at the rate of 3% by weight of cement over existing roof as in padding concrete to maintain required slope and minimum thickness 20mm complete all as specified and directed.

M & L for 5 mm thick cement screed in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note:- WPC will be measured separetely under respective item of BOQ

M & L for applying evenly a tack coat of industrial bitumen 85 / 25 @ 1.20 Kg per Sqm over the plastered surfaces of roof including cleaning the entire roof surfaces, remove all loose particles, dust/dirt particles surface complete all as specified & directed.

M&L for APP based polymetic membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surfaces by forced application complete all as specified and directed.

M&L for applying a coat of bitiminus aluminium paint @ 0.10 Kg/Sqm as weather proof coat complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light ,fan, socket or power ) complete (fittings such as switches , ceiling roses , pendants , regulators, sockets lamp holders,brackets,ceiling fittings,bulk head fittings,tube light fittings etc and making good disturbed surfaces of walls, floors etc as per existing finishes by plastring, repairs and white/colour/distempering etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/ exhaust fan point/bell point controlled by one, one way switch of 5 Amps.

All as per item No 106 here-in-after but wiring for one 5 pin 5 Amperes socket outlet per point on the same board, controlled by one, one way switch complete all as specified and directed.

All as per item No 106 here-in-after but wiring with using cable 2.50 Sqmm size as per earth wire of PVC insulated (Green colour) 1.50 Sqmm size solid copper conductor point cable for one 3 pin socket outlet, 15 Amperes on indipendent board complete all as specified and directed.

S & F Modular switch one way 10 Amps, 01 module complete all as specified and directed.

S & F Modular switch one way 16 Amps, 01 module complete all as specified and directed.

S & F Modular socket,6 Amps - 2/3 pin combined 2 Module. complete all as specified and directed.

S & F Modular socket, 6/16 Amps - 2/3 pin combined 2 Module. complete all as specified and directed.

S & F modular metal flush box, 2 module complete all as specified and directed.

S & F modular metal flush box, 3 module complete all as specified and directed.

S & F modular metal flush box, 4 module complete all as specified and directed.

S & F white cover plate with frame, 2 module complete all as specified and directed.

S & F white cover plate with frame, 3 module complete all as specified and directed.

S & F white cover plate with frame, 4 module complete all as specified and directed.

S & F lamp holder, PVC/Polycarbonate type with cord grip suitable for pendant fittings complete all as specified and directed.

S & F Ceiling rose, 3 phase PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply & fixing call bell, AC, 230 volts, single pole over and including pressed PVC rectangular block box of size 175mmx100mmx50mm deep duly covered with 3mm thick backlite sheet complete all as specified and directed.

S&F moduler bell push 6 Amps one module complete all as specified and directed.

S&F LED tube light fitting (1x22w), T5, energy saving channel suitable for LED lamp with standard fitting etc complete with all accessories internally pre-wired and including 22 W LED tube rod and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:- Havells/CG/Philips/Wipro

M&L wiring for circuit/sub main wiring with 2x6.0 Sqmm FR PVC insulated copper conductor single core cable alongwith 1x4.0 Sqmm earth wire FR PVC insulated copper conductor single core cable in PVC conduit of suitable dia in surface complete all as specified and directed.

S & F sheet metal enclosure for DB SPN 4 way with 200 Amp rated bus bar 240 Volts , double door suitable for housing MCBs and isolators complete all as specified and directed.

S & F isolator double pole 32 Amp, 240 volts complete all as specified and directed.

S & F isolator double pole 40 Amp, 240 volts complete all as specified and directed.

M&L, earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS TMT bars 8mm dia @ 150 c/c both ways and pit/chamber in PCC 1:2:4 type B1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S&F in repairs storage type water heater (BEE 5 star rating) ISI marked 25 litre capacity including holding down MS bolts 12mm dia complete all as specified and directed. Make:- Havells/Crompton/Racold

MANISH ENTERPRISES

S S CONSTRUCTION CO

NK CONSTRUCTION