REPAIRS TO STEEL FURNITURE AND PAINTING AND REPAIR / RECANNING OF WOODEN FURNITURE AND POLISHING OF FURNITURE OF BHUJ AND GANDIDHAM UNDER GE (A) BHUJ

Amount

Preparation of the following existing old steel surfaces of furniture itemild steel of any description and in any postion, filling cavities with necessary putty/filler to achive even and smooth surface and applying one coat of synthetc enamel paint on following itemild steel to achive even and smooth golsy finish complete all specified and directed. (a) Table Bed Side (FD/E6/Map/15 ( R ) NOTE : 1. Painting and polishing shall be done all around on all the exposed surfaces including internal accessories like shelves, draws, staioners, partition steel surfaces with spray painting all as approved by the Engineer-in-Charge. 2. Rate quoted by the contractor should be incusive of removing dents/correcting profiles of deshpaed itemild steel/parts to the normal postion. 3. Surface and site shall be left neat and clean. 4. Work shall be exeucted in Bldgs in users possession within perimeters of Army Area Bhuj or at BSO Yard as directed by Engineer-in-Charge.

All as per item No 01 here-in-before but Chair CB steel with Arms (FD-75(M)

All as per item No 01 here-in-before but Chair CB steel without Arms (FD-75)

All as per item No 01 here-in-before but Book Case steel - (FD-1028)

All as per item No 01 here-in-before but Almirah steel Med 1/2 H,1/2 Sh - (FD-1034, FD-104(M)& FD-114(M)

All as per item No 01 here-in-before but Almirah steel Med - (FD-1032, FD-65 & FD-243)

All as per item No 01 here-in-before but Table office Clerk (steel) (FD-1004)

All as per item No 01 here-in-before but Table office officer steel (FD-1003)

All as per item No 01 here-in-before but Teapoy Verandah (FD-255 FD-208)

All as per item No 01 here-in-before but Almirah Large steel 1/2 H,1/2 Sh- (FD-1033, FD/E6/MAP/18)

All as per item No 01 here-in-before but Almirah Large with sh steel - (FD-1031, FD-114 & FD-67)

All as per item No 01 here-in-before but Table (Steel) 900mmX900mmX760mm-FD-1009

All as per item No 01 here-in-before but Table (Steel) 900mmX600mmX760mm-FD-1008

All as per item No 01 here-in-before but Chair warting (steel) (FD-360)

All as per item No 01 here-in-before but Trustle store room (steel) FD-1043

All as per item No 01 here-in-before but Rack adjustable 6 tier steel FD-1038

All as per item No 01 here-in-before but Side rack steel with tray FD-97M/1023

All as per item No 01 here-in-before but Stool Steel 1'x1'x2' FD-81M

All as per item No 01 here-in-before but Bed Side Locker Steel Hospital (FD-157(M)

All as per item No 01 here-in-before but Bed Hard Map (FD/E6/Map/08)

All as per item No 01 but Chair School W/Hard Board (FD/E6/Map/05)

Material and labour for following repair to LOCKER STEEL-FD-127 FD-1029 (a) Removing old & unserviceable leg of locker and supplying and fixing new leg of locker (steel) as per drg.

All as per item No 22 here-in-before but Removing old & unserviceable handle and supplying and fixing new chromium plated handle 100mm long for locker (steel) as per drg.

All as per item No 22 here-in-before but Removing old & unserviceable hasp & staple and supplying and fixing new safety type hasp and stapple chromium plated 75mm long, 3mm thick as per drg.

All as per item No 22 here-in-before but Removing old & unserviceable hanging rod and supplying and fixing new hanging rod of 20mm dia conduit pipe of 1.6mm thick with sockets all as per drg.

All as per item No 25 here-in-before but Material and labour for following repair to CHAIR SCHOOL W/HARD BOARD (FD/E6/Map/05) (a) Removing old unserviceable conduit pipe Supply and fixing new Conduit pipe 25mm dia 18 guage using gas welding and standard workmanship complete all as directed.

All as per item No 25 here-in-before but Removing old unserviceable Hand Rest Board Supply and fixing new Hand Rest Board size 585mm x 300mm x 25mm thick T.W. free from dead knot.

All as per item No 25 here-in-before but Removing old unserviceable rubber shoe and Supply and fixing new rubber shoe

Material and labour for following repair to CHAIR COMPUTER/REVOLVING (FD/E6/Map/01) (a) Removing of old and unserviceable Cloth of Chair seat and back and Supply and fixing new superior quality cloth fixed with takel blue. Cloth shall not be less than Rs 200/mtr and colour & quality approved by Engr-in-Charge.

All as per item No 29 here-in-before but Supply and fixing lifting jack/shocker after taking out unservicable jack/shocker.

All as per item No 29 here-in-before but Supply and fixing caster roller pin/ screw type after taking out unservicable caster roller pin/ screw type.Make- ISI Mark

All as per item No 29 here-in-before but Supply and fixing PVC arm rest after taking out unservicable arm rest.

Material and labour for following repair to TABLE COMPUTER (FD/E6/MAP/03) (a) Removing of existing broken damaged top of lower stand of Table Computer of size 300mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 300mm x4 50mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

All as per item No 33 here-in-before but Removing of existing broken damaged top of lower stand of Table Computer of size 300mm x 300mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 300mm x4 50mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

All as per item No 33 here-in-before but Removing of existing broken damaged bottom of key bd of Table Computer of size 475mm x 440mmx18mm thick & supply and fixing of new bottom of prelaminated partical board of size 475mm x440mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

All as per item No 33 here-in-before but Supply and fixing of New Sliding Assembly No-10 made of steel cromium plated for key board (ISI Marked)

All as per item No 33 here-in-before but Supply and fixing of New Sliding Assembly No-5 made of steel cromium plated for drawer & mouse stand (ISI Marked)

All as per item No 33 here-in-before but Removing of existing broken damaged partical board portion of side stand of Table Computer of size 650mm x 150mmx18mm thick & supply and fixing of Prelaminated partical board of size 650mm x150mmx18mm thick fixing with 06 Nos screws all as shown on drg and as directed by Engr-in Charge.

All as per item No 33 here-in-before but Supply and fixing of New Steel handle of size 100 (ISI Marked)

All as per item No 33 here-in-before but Removing of existing broken damaged top of Table Computer of size 900mm x 550mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 900mm x 550mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

Material and labour for following repair to TABLE BED SIDE MAP (FD/E6/MAP/15(R)) (a) Removing of existing broken damaged top of Table bed side of size 450mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed by Engr-in Charge.

All as per item No 41 here-in-before but Removing old unserviceable MS Square pipe Supply and fixing new MS Square pipe 18mm x18mm x 18 guage using gas welding and standard workmanship complete all as directed. All as shown on drgs.

All as per item No 41 here-in-before but Removing old unserviceable Back side of table bed side frame Supply and fixing new back side size 582mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

All as per item No 41 here-in-before but Removing old unserviceable Rear side of table bed side frame Supply and fixing new rear side size 500mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

All as per item No 41 here-in-before but Removing old unserviceable shutter of table bed side frame Supply and fixing new shutter size 350mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

All as per item No 41 here-in-before but Removing old unserviceable drawers Supply and fixing new Drawers of table bed side front size 450mm x 100mm x 18mm thick and side frame size 355mm x 100mm x 18mm thick prelaminated particale board exterior gde and 6mm thick commercial ply shall be fixed in bottom. All as shown on drgs.

All as per item No 41 here-in-before but Removing old unserviceable telescopic chanel Supply and fixing new tele scopic chanel 300mm long and 50mm wide fixed in drawers.

All as per item No 41 here-in-before but Removing old unserviceable C.P. Handle Supply and fixing new C.P. Handle 75mm long for drawers.

Material and labour for following repair to ALMIRAH LARGE STEEL1/2 H,1/2 SH And with Sh AND ALMIRAH MEDIUM STEEL 1/2h,1/2 Sh And with/Sh FD-67(M) FD-1031 FD-1032 ,(FD-1034, FD-104(M)& FD-114(M)-- (a) Remove old unserviceable lock Supply and fixing new brass lock (6 lever) and chromium plated with duplicate key for large/medium almirah steel all as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable 3 way locking device and Supply and fixing new three way locking devices MS seat cover for almirah steel large / medium as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable handle and Supply and fixing new almirah handles 125 mm for large/ medium as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable clips and Supply and fixing new MS shelving clips for almirah medium/large steel as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable hinges and Supply and fixing new MS door hinges by welding 75mm size for almirah large steel / medium steel as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable legs and Supply and fixing new legs for almirah steel as per drg.

All as per item No 49 here-in-before but Remove old & unserviceable shelf and Supply and fixing new shelf for large/ medium as per drg.

Material and labour for following repair to TABLE DINING OR - FD-165(M)-- (a) Removing old and unserviceable portion of MS square tubing of table dining ORs & supply and fixing of new portion of MS 25mm square tube with 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

All as per item No 50 here-in-before but to Removing of existing broken damaged table top of the table dining ORs & supply and fixing of new table top of partical board 18 mm thick of size 1.9 meter long and 0.685 meter wide duly covered with 0.79 mm thick alimimunim sheet with full threaded machine.

Material and labour for following repair to REPAIR TO TEAPOY VARANDAH-FD-255 FD-208- (a) Remove old & unserviceable top of teapoy varandah & Supply and fixing new top made of Prelaminated particale board exterior grade as per drg.

All as per item No 58 here-in-before but to Remove old & unserviceable portion of MS conduit tubing 19/20mm of teapoy varandah & Supply and fixing new pipe by gas welding of 19/20mm conduit tubing upto 6" as per drg.

All as per item No 58 here-in-before but to Supply and fixing two nos of 350mm long 20mm dia MS conduit pipe and welding as stiffiners at both side and one No of 750mm long as centre stiffiner.

Material and labour for following repair to CHAIR CB STEEL WITH ARMS-FD-75(M)-- (a) Remove old & unserviceable second class hard wood seat frame & Supply and fixing new second class hard wood seat frame with nut and bolt to conduit pipe for chair CB `A' steel arms, duly canned as per drg. Godrej pattern size 460mm x 450mm duly black polished all as per drg.

All as per item No 61 here-in-before but to Remove old & unserviceable second class hard wood back frame and Supply and fixing new second class hard wood back frame with nut & bolts to conduit pipe for chair CB `A' steel arms, duly canned as per Godrej pattern size 460mm x 410mm duly black polished all as per drg.

All as per item No 61 here-in-before but to Supply and fixing by welding of iron strip size 25mm x 3mm thick and 500mm long with two holes in each strip for fixing the screw to the seat frame of the chairs.

All as per item No 61 here-in-before but to Supply and fixing by welding 04 Nos flat iron 50 x 3mm to a length of 4" cut & made to shape both sides of the chair leg each side 02 Nos.

All as per item No 61 here-in-before but to Remove old & unserviceable second class hard wood arm and Supply and fixing of second class hard wood arms for chair CB `A' steel with arms duly black polished all as per drg.

Material and labour for following repair to CHAIR CB STEEL WITHOUT ARMS- FD-75-- (a) Remove old & unserviceable second class hard wood seat frame and Supply and fixing new second class hard wood seat frame for chair CB without arms steel with nuts & bolts to conduit pipe, seat duly canned as per Godrej pattern of size 380mm x 420mm duly black polished, all as per drg.

All as per item No 66 here-in-before but to Remove old & unserviceable second class hard wood back frame Supply and fixing new second class hard wood back frame for chair CB steel with out arms steel with nut & bolts to conduit pipe, back frame duly canned as per Godrej pattern of size 380mm x 420mm duly black polished all as per drg.

All as per item No 66 here-in-before but to Supply and fixing by welding of iron strip size 25mm x 3mm thick and 420mm long with two holes for fixing the screw to the seat frame.

All as per item No 66 here-in-before but to Supply and fixing by welding of 4 Nos flat iron 50x3mm to a length of 6" cut & made to shape both side of chair leg each side 02 Nos.

Material and labour for following repair to TABLE OFFICE CLERK (STEEL)- FD-1004-- (a) Repairs to all existing drawer of steel table office clerk by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

All as per item No 70 here-in-before but to Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

All as per item No 70 here-in-before but to Removing of existing broken damaged table top of the table office clerk steel of size 1200mm x 600mm x 18mm thick & supply and fixing of new table top of pre laminated partical board 18mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply one coat of black / olive green paint to the steel frame of table , all as shown on drg and as directed.

All as per item No 70 here-in-before but to Removing of existing broken damaged standard PVC Handle and Supply and fixing new standard PVC Handle.

Material and labour for following repair to TABLE OFFICE OFFICER (STEEL) : FD-1003-- (a) Repairs to all existing drawer of steel table office officer by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

All as per item No 74 here-in-before but Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

All as per item No 74 here-in-before but Removing of existing broken damaged table top of the table office officer steel of size 1680mmx870mmx18mm thick & supply and fixing of new table top of prelaminated partical board 18mm thick 4mm teak wood edging shall be provided all round the top & fixed with 75mm long steel screw and applying one coat of black / olive green paint to the steel frame of table rest all as shown on drg and as directed.

All as per item No 74 here-in-before but Removing of existing broken damaged standard PVC Handle and Supply and fixing new standard PVC Handle.

Material and labour for following repair to TABLE (STEEL) 900mmX900mmX760mm-FD-1009(M) (a) Remove old and unserviceable portion of MS square tubing of table 3x3 and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

All as per item No 78 here-in-before but Removing of existing broken damaged table top of the table of size 900mmx900mmx18mm thick and supply and fixing of new table top of pre laminated partical board 18 mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply once coat of black/olive green paint to the steel frame of Table rest all as shown on drg and as directed.

Material and labour for following repair to CHAIR VARANDAH WITH CANE (FD-19) (a) Removing of existing unserviceable old cane from chair varandah and supply and weaving of the same with new plastic cane 4 mm wide, white colour half round of approved quality including applying two coats of white synthetic enameled paint of approved quality on old steel surfaces of chair before canning complete all as directed

All as per item No 80 here-in-before but Removal of old and unserviceable portion of mild steel conduit tubing of chair varandah and Supply and fixing new portion of 20mm dia mild steel tubing with gas welding and with standard workmanship at four tuck welds where required as per drg and apply two coat of white paint over a coat of red oxide primer on the welding portion to match with existing white paint colour of chair varandah complete all as directed.

All as per item No 80 here-in-before but Removing of existing unserviceable old Rubber shoe and Supply and fixing new rubber shoe.

Material and labour for following repair to CHAIR WRITING STEEL (MAP) (a) Removing of old and unserviceable cushion of seat and back both of chair writing steel and proving new 40 density cushion of 75 mm thick for seat and 50 mm thick for back both covered separately with leather rexine and fix suitable for seat and back complete as per drg all as directed by Engineer-in-Charge.

Material and labour for following repair to TABLE (STEEL) 900mmX600mmX760mmFD-1008(M) (a) Remove old and unserviceable portion of MS square tubing of table 900x600x760mm and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

All as per item No 84 here-in-before but Supply and fixing in replancement the new top table 900x600x760 mm (FD-1008(M) with prelaminated partical board of size 900x600x18 mm with and teak wood edging 4mm thick alround fixed with long steel screw at appropriate distance and applying one coat of black paint/Olive green paint ti steel surfaces of the table complete all as show on drawing specifed and directed.

Material and labour for preparation of old polished wooden surfaces of the following by scrapping and filling canties, if any, with filler/putty to achieve even and smooth surface , sand papered and applying coat(s) of french polish readymade of brand approved to the following furniture to acheieve uniform glossy finish to the entire satisfaction of Engineer-in-charge complete all as specified and directed (a) polishing Peg Table Drawing No FD-25 FD-277 FD-236 FD-384

All as per item No 86 here-in-before but Sofa set 4 seater --. Drawing No FD-258/ 281/373

All as per item No 86 here-in-before but Sofa set 5 seater -. Drawing No FD-258/ 281/373

All as per item No 86 here-in-before but Table Writing FD/table writing medium --. Drawing No FD-33 FD-275 FD-249

All as per item No 86 here-in-before but Table Centre. Drawing No FD-276 FD-274 FD-235

All as per item No 86 here-in-before but Table Bed side . Drawing No FD-276 FD-248 FD-210

All as per item No 86 here-in-before but Table dinning 6/8 person. Drawing No FD-239, 273 & 376

All as per item No 86 here-in-before but Table 3'x2' with drawer/without drawer -ditto-. Drawing No FD-42/ 55/224/ 283/284

All as per item No 86 here-in-before but Teapoy -ditto-. Drawing No FD-34 FD-382 FD-278

All as per item No 86 here-in-before but Side Board -ditto-. Drawing No FD-241 FD-371

All as per item No 86 here-in-before but Table dressing ladies -ditto-. Drawing No FD-378/251

All as per item No 86 here-in-before but Table dressing gents -ditto-. Drawing No FD-230, 231,379

All as per item No 86 here-in-before but Rack side 3/4 spaces -ditto-. Drawing No WFD-27

All as per item No 86 here-in-before but Chair dinning with long back -ditto-. Drawing No FD-357

All as per item No 86 here-in-before but Table 600 x 600 x 760MM -ditto- . Drg No FD-293

All as per item No 86 here-in-before but Bed Ply wood top Drawing No FD-214 FD-245 FD-246 FD-247

All as per item No 86 here-in-before but Chair Dining -ditto-. Drawing No FD-16 FD-203 FD-228 FD-279

All as per item No 86 here-in-before but Chair Easy -ditto-. Drawing No FD-17 FD-201 FD-229

All as per item No 86 here-in-before but Chair Writing -ditto-. Drawing No FD-20 FD-202 FD-250 FD-280

All as per item No 86 here-in-before but Hat stand with mirror -ditto-. Drawing No FD-362 FD-233

Material and labour for replacement of old existing unserviceable wooden members of CHAIR EASY and supply and fixing of new timber Ist class HW members of new front legs upper side size 55 x25mm & bottom side 25mm x 25mm, high shall be 940mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD- 229

All as per item No 106 here-in-before but rear Legs size 545x55x25mm

All as per item No 106 here-in-before but arms size 610x65x25mm

All as per item No 106 here-in-before but front rail size 510 x 70 x 40mm

All as per item No 106 here-in-before but rear rails size 575 x70 x 40mm

All as per item No 106 here-in-before but replacement of old existing cane and supply and weaving cane 2 mm wide, half round, white colour and border shall be weaved with 4 mm semi round cane of approved quality and as per Godrej patern complete all as directed.

Material and labour for replacement of old existing unserviceable wooden members of CHAIR WRITING and supply and fixing of new timber Ist class HW members of new front legs of size 55X30X685mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-280

All as per item No 112 here-in-before but new rear legs Of size 30X55X890 mm

All as per item No 112 here-in-before but new stiffner of size 25x20x535 mm

All as per item No 112 here-in-before but new arms of size 60X25X470 mm

All as per item No 112 here-in-before but new front/rear/side rail size 30X65X535 mm

All as per item No 112 here-in-before but back stiffner of size 50 x 50 x 470 mm

All as per item No 112 here-in-before but replacement of old existing cane and supply and weaving cane 2 mm wide, half round, white colour and border shall be weaved with 4 mm semi round cane of approved quality and as per Godrej patern complete all as directed.

Material and labour for replacement of old existing unserviceable wooden members of CHAIR DINING and supply and fixing of new timber Ist class HW members of new front legs of size 55X30X460mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-279

All as per item No 119 here-in-before but new rear legs of size 55X30X890 mm

All as per item No 119 here-in-before but new stiffner of size 25x20x440mm

All as per item No 119 here-in-before but new front/side/rear rails of size 65x30X440 mm

All as per item No 119 here-in-before but back horizontal rests of size 45x15x405mm made slightly curved in shape out of wooden member of size 50 x 35x 470 mm

All as per item No 119 here-in-before but removing of old existing cane and supply and weaving cane 2 mm wide, half round, white colour and border shall be weaved with 4 mm semi round cane of approved quality and as per Godrej patern complete all as directed.

Material and labour for replacement of old existing unserviceable wooden members of PEG TABLE and supply and fixing of new timber Ist class HW members of new legs of size 30x50x370mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-227 / 384

All as per item No 125 here-in-before but new top long rail of size 20x40x450 mm

All as per item No 125 here-in-before but new top short rail of size 20x40x380 mm

All as per item No 125 here-in-before but Stiffeners of size 30 x 45 x 380 mm

Supply and fixing 18 mm thick prelaminated particle board with Phenol formaldehyde IS-12823 exterior grade-II on the top of peg table. Size of the peg table shall be 450x300 mm, 4 mm teak wood edging shall be provided all round the top of the peg table and apply two coats of french polish to achieve glossy finish.

Material and labour for replacement of old existing unserviceable wooden members of TABLE CENTRE and supply and fixing of new timber Ist class HW members of new legs of legs of size 60X30X400mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-274

All as per item No 130 here-in-before but top long rail of size 20x50x900mm

All as per item No 130 here-in-before but but top short rail of size 20x50x450mm

All as per item No 130 here-in-before but but stiffiner of size 50x20x450mm

Supply and fixing 18 mm thick prelaminated partical board with Phenol formaldehyde IS -12823 exterior grade II on top of the table centre. Size of the table cenre shall be 900x450mm. 4 mm teak wood edging shall be provided all round the top of the table centre and apply two coat of french polish to achieve glossy finish etc complete all as directed by Engineer-in-Charge.

Material and labour for replacement of old existing unserviceable wooden members of SIDE BOARD and supply and fixing of top made of prelaminated particle board 18/19 mm thick after taking out of old/ broken/ cracked top carefully, shape and size all as drg well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD - 241

All as per item No 135 here-in-before but bottom made of prelaminated particle board 18/19 mm thick after taking out of old/ broken/ cracked top carefully, shape and size all as per drg.

All as per item No 135 here-in-before but drawer made out of prelaminated particle board 18/19 mm thick all as per drg.

All as per item No 135 here-in-before but two horizental shelves at left side equally spaced

All as per item No 135 here-in-before but two magnetic catch spring to the shutter.

All as per item No 135 here-in-before but CP brass handle of size 75 mm .

Material and labour for replacement of old existing unserveceable top of TABLE WRITING, Supply and fixing 18/19 mm thick decorative pre laminated partical board with 4 mm thick teak wood edjing as per drawing and as directed by engineer-in-charge. Drawing No FD- 275

All as per item No 141 here-in-before but Replacement of long rail as per Drawing

All as per item No 141 here-in-before but Replacement of short rail

All as per item No 141 here-in-before but Replacement of Legs as per Drawing

All as per item No 141 here-in-before but Replacement of shutter 18/19 mm thick decorative prelaminated partical board with 4 mm teak wood edging

All as per item No 141 here-in-before but Replacement of Chromium plated knobs 40 mm

All as per item No 141 here-in-before but Replacement of shelves 12 mm thick prelaminated particle board with one side teak wood beeding

Removing/replacement of table top of TABLE 600 X 600 x 760MM, Supply and fixing 18/19 mm thick prelaminated partical board top as per drawing and as directed.

All as per item No 148 here-in-before but Rail made of II nd class HW

All as per item No 148 here-in-before but Legs made of IInd class HW

Removing of old/unserviceable and Supply and fixing new 4 x 10 mm thick RIBS moulded along with seat in single piece and PVC seat 4mm thick with holes & screwed with frame of CHAIR DINING JCO/OR'S of good quality as approved by GE, complete all as specified and directed. Drawing No .FD-FD/MAP-II/05

All as per item No 151 here-in-before but new rear legs of size 55X30X890 mm

All as per item No 151 here-in-before but new stiffner of size 25x20x440mm

All as per item No 151 here-in-before but new front/side/rear rails of size 65x30X440 mm

All as per item No 151 here-in-before but back horizontal rests of size 45x15x405mm made slightly curved in shape out of wooden member of size 50 x 35x 470 mm

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING OFFRS, good quality as approved by GE, complete all as specified and directed. Drawing No FD-FD/MAP-II/04

Removing of old faded cushion cover only of a seat or back of SOFA SET 5 SEATER and Supply and fixing new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit). Drawing No FD-281/373

Removing of old unserviceable Foam cushion and Supply and fixing new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop Drawing No FD-281/373

Removing of old faded cushion cover only of a seat or back of SOFA SET 4 SEATER and Supply and fixing new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old unserviceable Foam cushion and Supply and fixing new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop. Drawing No. FD-281/373

Material and labour for replacement of old existing unserviceable wooden members of TALBE 900X600X760MM WITH DRAWAR /WITHOUT DRAWER and Supply and fixing of new timber Ist class HW members of new legs of size 60X30X760MM well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drwaing No FD-283/284

All as per item No 161 here-in-before but new rail of size 20x60x600mm

All as per item No 161 here-in-before but new rail of size 20 x 60 x 900 mm

All as per item No 161 here-in-before but Stiffeners of size 25 x 35 x 900 mm

Supply and fixing 18 mm thick prelaminated partical board with Phenol formaldehyde IS-12823 exterior grade-II on top of the table Size of the table top shall be 900 x 600mm, 4 mm teak wood edging shall be provided all round the top of the table and apply two coat of french polish to achieve glossy finish.

Material and labour for replacement of old existing unserviceable wooden members of TEAPOY and supply and fixing of new timber Ist class HW members of new legs of size 60X30X540mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-278

All as per item No 166 here-in-before but long rail of size 20x50x600mm

All as per item No 166 here-in-before but top short rail of size 20x50x450mm

All as per item No 166 here-in-before but Siffeners of size 20 x 25 x 600 mm

Supply and fixing 18 mm thick prelaminated partical board with Phenol formaldehyde IS-12823 exterior grade-II on the top of the teapoy. Size of the teapoy top shall be 600x450 mm, 4 mm teak wood edging shall be provided all round the top of the teapoy and apply two coat of french polish to achieve glossy finish etc.

Material and labour for replacement of old existing unserviceable wooden members of TABLE DINNING 6/8 PERSONS and supply and fixing of new timber Ist class HW members of new legs of size 60X60X760MM well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-239

All as per item No 171 here-in-before but new short rail of size 25x100x900mm

All as per item No 171 here-in-before but new long rail of size 20 x 100x 1800 mm

Supply and fixing 18 mm thick prelaminated partical board with Phenol formaldehyde IS-12823 exterior grade-II on top of the table dining size shall be 1800x900 mm, 1500 x 900 mm, 4 mm teak wood edging shall be provided all round the top of the table dining and apply two coats of french polish to achieve glossy finish.

Material and labour for replacement of old existing unserviceable wooden members of BED PLY WOOD TOP and supply and fixing of new timber Ist class HW members of long rail of size 35 x90x1980 mm from bed, well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-246

All as per item No 175 here-in-before but short legs from bed 60 x 60 x400mm

All as per item No 175 here-in-before but stiffener and new stiffener of size 40 x 60 x 900 mm

All as per item No 175 here-in-before but one side teak face plywood fixed on foot board size 780 x 180 x 4mm

All as per item No 175 here-in-before but one side teak face plywood fixed on head board size 780 x 340 x 4mm

All as per item No 175 here-in-before but 12mm thick ply wood top

JOY ENTERPRISE