REPAIRS TO FURNITURE ITEMS AND REPAIR / REPLACEMENT OF PLYWOOD CHARPOY HARDTOP FOR FURNITURE OF BHUJ AND GANDHIDHAM MIL STN UNDER GE ARMY BHUJ

Amount

REPAIRS TO STEEL FURNITURE: REPAIR TO RACK SHOE STEEL (FD/E6/MAP/04) Removing old unserviceable portion of and S&F main frame of Rack shoe steel 25mm dia pipe

Removing old unserviceable portion of and S&F 3mm dia MS wire (9 Nos,equidistant)and 3mm dia MS wire (3 Nos,equidistant) size 700mm x 300mm. All as shown on drg.

M&L for Rack shoe steel and perpration of surface for painting with spray to complete Rack with one coat of synthetic enamel paints Black completely as directed.

REPAIR TO LOCKER STEEL-FD-127 FD-1029: Removing old & unserviceable leg of locker and supplying and fixing new leg of locker (steel) as per drg.

Removing old & unserviceable handle and supplying and fixing new chromium plated handle 100mm long for locker (steel) as per drg.

Removing old & unserviceable hasp & staple and supplying and fixing new safety type hasp and stapple chromium plated 75mm long, 3mm thick as per drg.

Removing old & unserviceable hanging rod and supplying and fixing new hanging rod of 20mm dia conduit pipe of 1.6mm thick with sockets all as per drg.

REPAIR TO CHAIR COMPUTER/REVOLVING (FD/E6/Map/01): Removing of old and unserviceable Cloth of Chair seat and back and S&F new superior quality cloth fixed with takel blue. Cloth shall not be less than Rs 200/mtr and colour & quality approved by Engr-in-Charge.

Supply and fixing lifting jack/shocker after taking out unservicable jack/shocker.

Supply and fixing caster roller pin/ screw type after taking out unservicable caster roller pin/ screw type.Make- ISI Mark

Supply and fixing PVC arm rest after taking out unservicable arm rest.

REPAIR TO TABLE COMPUTER (FD/E6/MAP/03): Removing of existing broken damaged top of lower stand of Table Computer of size 300mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 300mm x4 50mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed

Removing of existing broken damaged top of lower stand of Table Computer of size 300mm x 300mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 300mm x4 50mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed.

Removing of existing broken damaged bottom of key bd of Table Computer of size 475mm x 440mmx18mm thick & supply and fixing of new bottom of prelaminated partical board of size 475mm x440mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed.

S & F of New Sliding Assembly No-10 made of steel cromium plated for key board (ISI Marked)

S & F of New Sliding Assembly No-5 made of steel cromium plated for drawer & mouse stand (ISI Marked)

Removing of existing broken damaged partical board portion of side stand of Table Computer of size 650mm x 150mmx18mm thick & supply and fixing of Prelaminated partical board of size 650mm x150mmx18mm thick fixing with 06 Nos screws all as shown on drg and as directed.

S & F of New Steel handle of size 100 (ISI Marked)

Removing of existing broken damaged top of Table Computer of size 900mm x 550mmx18mm thick & supply and fixing of new top of prelaminated partical board of size 900mm x 550mmx18mm thick & edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed.

REPAIR TO TABLE BED SIDE MAP (FD/E6/MAP/15(R)): Removing of existing broken damaged top of Table bed side of size 450mm x 450mmx18mm thick & supply and fixing of new top of prelaminated partical board edging shall be provided all round the top with PVC beading patti plan type all as shown on drg and as directed

Removing old unserviceable MS Square pipe S&F new MS Square pipe 18mm x18mm x 18 guage using gas welding and standard workmanship complete all as directed. All as shown on drgs.

Removing old unserviceable Back side of table bed side frame S&F new back side size 582mm x 450mm x 18mm thick prelaminated particale board exterior gde. All as shown on drgs.

Removing old unserviceable Rear side of table bed side frame S&F new rear side size 500mm x 450mm x 18mm thick prelaminated particale board exterior gde All as shown on drgs.

Removing old unserviceable shutter of table bed side frame S&F new shutter size 350mm x 450mm x 18mm thick prelaminated particale board exterior gde All as shown on drgs.

Removing old unserviceable drawers S&F new Drawers of table bed side front size 450mm x 100mm x 18mm thick and side frame size 355mm x 100mm x 18mm thick prelaminated particale board exterior gde and 6mm thick commercial ply shall be fixed in bottom. All as shown on drgs.

Removing old unserviceable telescopic chanel S&F new tele scopic chanel 300mm long and 50mm wide fixed in drawers.

Removing old unserviceable C.P. Handle S&F new C.P. Handle 75mm long for drawers.

REPAIR TO TABLE DINING OR - FD-165(M): Removing old and unserviceable portion of MS square tubing of table dining ORs & supply and fixing of new portion of MS 25mm square tube with 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

Removing of existing broken damaged table top of the table dining ORs & supply and fixing of new table top of partical board 18 mm thick of size 1.9 meter long and 0.685 meter wide duly covered with 0.79 mm thick alimimunim sheet with full threaded machine.

REPAIR TO TEAPOY VARANDAH-FD-255 FD-208: Remove old & unserviceable top of teapoy varandah & S&F new top made of Prelaminated particale board exterior grade as per drg.

Remove old & unserviceable portion of MS conduit tubing 19/20mm of teapoy varandah & S&F new pipe by gas welding of 19/20mm conduit tubing upto 6" as per drg.

S & F two nos of 350mm long 20mm dia MS conduit pipe and welding as stiffiners at both side and one No of 750mm long as centre stiffiner.

REPAIR TO FORM WITHOUT BACK-FD-77: Remove old & unserviceable portion of MS square at legs of form without back and S&F new tubing by gas welding of 25mm MS square tube of 1.6 mm thick upto 6" long as per drg.

Removing old & unserviceable seat from the form without back and supply and fix new seat of Ist class hard wood (Indian teak)of size 1525 x 255 x 25 mm well seasoned in one piece,free from knots, cracks and sap and applying two coat of french polish to achieve glossy finishing and fixing with steel frame of form without back with nuts, bolts and washer and applying one coat of black/olive green synthetic enamel paint on steel surfaces of frame complete all as directed.

REPAIR TO FORM WITH BACK-FD-78 Remove old & unserviceable portion of MS square tube at legs of form with back and S & F new tubing by gas welding of 25 mm MS square tube of 6 " long x 1.6 mm thick all as per drg.

Removing old & unserviceable seat and supply and fix new seat of Ist class hard wood (Indian teak) of size 1800x255x25mm in one piece well seasoned free from knots, cracks and sap and applying two coat of french polish to achieve glossy finishing and fixing with steel frame of form with back with nuts, bolts and washer and applying one coat of black / olive green synthetic enamel paint on steel surfaces of frame complete all as directed.

Removing old & unserviceable back of form back and supply and fix new back of Ist class hard wood (Indian teak)of size 1800 mm x150x19 mm in one piece well seasoned free from knots, cracks and sap and applying two coat of french polish to achieve glossy finishing and fixing with steel frame of form with back with nuts, bolts and washer all as shown in drg and as directed.

Running welding at places for loosened joints.

REPAIR TO TABLE OFFICE CLERK (STEEL)- FD-1004: Repairs to all existing drawer of steel table office clerk by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

Removing of existing broken damaged table top of the table office clerk steel of size 1200mm x 600mm x 18mm thick & supply and fixing of new table top of pre laminated partical board 18mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply one coat of black / olive green paint to the steel frame of table , all as shown on drg and as directed.

Removing of existing broken damaged standard PVC Handle and S&F new standard PVC Handle.

REPAIR TO TABLE OFFICE OFFICER (STEEL): FD-1003: Repairs to all existing drawer of steel table office officer by taking out from table, removing and denting by cutting, welding etc as required and easning and resetting in the table for smooth functioning.

Taking down unserviceable locking arrangement from drawers & supply & fix new brass lever lock (6 lever) with duplicate key including locking arrangement.

Removing of existing broken damaged table top of the table office officer steel of size 1680mmx870mmx18mm thick & supply and fixing of new table top of prelaminated partical board 18mm thick 4mm teak wood edging shall be provided all round the top & fixed with 75mm long steel screw and applying one coat of black / olive green paint to the steel frame of table rest all as shown on drg and as directed.

Removing of existing broken damaged standard PVC Handle and S&F new standard PVC Handle.

REPAIR TO STOOL (STEEL) 305X305X510MM-FD-81(M) Remove old unserviceable portion of leg made out of MS sheet 1.6 mm thick upto 6" 4 Nos including S&F new MS leg made out of MS 1.6 mm thick upto 6" 4 Nos by gas welding as per drg.

Remove old & unserviceable seat and S&F new sheet MS plain 1.6 mm thick by gas welding, size of top 305 mm x 305 mm and all as per drg.

REPAIR TO TABLE (STEEL) 900mmX900mmX760mm-FD-1009(M): Remove old and unserviceable portion of MS square tubing of table 3x3 and fixing of new portion of MS square tube 25mm 1.6mm wall thickness upto 150mm long by gas welding and standard workmanship complete all as directed.

Removing of existing broken damaged table top of the table of size 900mmx900mmx18mm thick and supply and fixing of new table top of pre laminated partical board 18 mm thick 4mm teak wood edging shall be provided all round of the top & fixed with 75mm long steel screw and apply once coat of black/olive green paint to the steel frame of Table rest all as shown on drg and as directed.

REPAIRS TO WOODEN FURNITURE: M & L for replacement of old existing unserviceable wooden members of CHAIR EASY and supply and fixing of new timber Ist class HW members of new front legs upper side size 55 x25mm & bottom side 25mm x 25mm, high shall be 940mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD- 229

All as per Item No. 51 here in above but rear Legs size 545x55x25mm

All as per Item No. 51 here in above but arms size 610x65x25mm

All as per Item No. 51 here in above but front rail size 510 x 70 x 40mm

All as per Item No. 51 here in above but rear rails size 575 x70 x 40mm

All as per Item No. 51 here in above but replacement of old existing cane and supply and weaving cane 2 mm wide, half round, white colour and border shall be weaved with 4 mm semi round cane of approved quality and as per Godrej patern complete all as directed.

M & L for replacement of old existing unserviceable wooden members of CHAIR WOODEN BATTOM and supply and fixing of new timber Ist class HW members of new front legs of size 55X30X685mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-56,286

All as per Item No. 57 here in above but new rear legs Of size 30X55X890 mm

All as per Item No. 57 here in above but new stiffner of size 25x20x535 mm

All as per Item No. 57 here in above but new arms of size 60X25X470 mm

All as per Item No. 57 here in above but new front/rear/side rail size 30X65X535 mm

All as per Item No. 57 here in above but back stiffner of size 50 x 50 x 470 mm

All as per Item No. 57 here in above but replacement of old existing cane and supply and weaving cane 2 mm wide, half round, white colour and border shall be weaved with 4 mm semi round cane of approved quality and as per Godrej patern complete all as directed.

M & L for replacement of old existing unserviceable wooden members of PEG TABLE and supply and fixing of new timber Ist class HW members of new legs of size 30x50x370mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-227 / 384

All as per Item No. 64 here in above but new top long rail of size 20x40x450 mm Ditto

All as per Item No. 64 here in above but new top short rail of size 20x40x380 mm Ditto

All as per Item No. 64 here in above but Stiffeners of size 30 x 45 x 380 mm Ditto

S & F 18 mm thick prelaminated particle board with Phenol formaldehyde IS-12823 exterior grade-II on the top of peg table. Size of the peg table shall be 450x300 mm, 4 mm teak wood edging shall be provided all round the top of the peg table and apply two coats of french polish to achieve glossy finish.

M & L for replacement of old existing unserviceable wooden members of TABLE CENTRE and supply and fixing of new timber Ist class HW members of new legs of legs of size 60X30X400mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-274

All as per Item No. 69 here in above but top long rail of size 20x50x900mm Ditto

All as per Item No. 69 here in above but top short rail of size 20x50x450mm Ditto

All as per Item No. 69 here in above but stiffiner of size 50x20x450mm Ditto

S & F 18 mm thick prelaminated partical board with Phenol formaldehyde IS -12823 exterior grade II on top of the table centre. Size of the table cenre shall be 900x450mm. 4 mm teak wood edging shall be provided all round the top of the table centre and apply two coat of french polish to achieve glossy finish etc complete all as directed.

M & L for replacement of old existing unserviceable glass of TABLE DRESSING GENTS WITH MIRROR and supply and fixing of new 5.0mm thick mirror, as directed by Engineer -in-charge and shown in drawing. Drawing No FD - 230

All as per Item No. 74 but new long rail frame

All as per Item No. 74 but new short rail frame

All as per Item No. 74 but 6mm thick ply wood for back

All as per Item No. 74 but batten of size 25 x 35 x 200 mm

All as per Item No. 74 but 1.0 mm thick lamination sheet for top of the table

All as per Item No. 74 but 1.0mm thick lamination sheet for both sides of the table

All as per Item No. 74 but 12mm thick pre-laminated particle board

All as per Item No. 74 but Aluminium anodised knobs of size 25mm dia

M & L for replacement of old existing unserviceable glass of TABLE DRESSING LADIES WITH MIRROR and supply and fixing of new 5.0 mm thick mirror, as directed and shown in drawing. Drawing No FD -251

All as per Item No. 83 but new long rail frame

All as per Item No. 83 but new short rail frame

All as per Item No. 83 but 6 mm thick ply wood for back

All as per Item No. 83 but batten of size 35 x 45 x 300mm

All as per Item No. 83 but 1.0 mm thick lamination sheet for top of the table

All as per Item No. 83 but 1.0 mm thick lamination sheet for both side of the table.

All as per Item No. 83 but 12 mm thick pre-laminated particle board.

All as per Item No. 83 but 25mm dia aluminium anodised knobs.

M & L for replacement of old existing unserviceable wooden members of SIDE BOARD and supply and fixing of top made of prelaminated particle board 18/19 mm thick after taking out of old/ broken/ cracked top carefully, shape and size all as drg well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD - 241

All as per Item No. 92 but bottom made of prelaminated particle board 18/19 mm thick after taking out of old/ broken/ cracked top carefully, shape and size all as per drg.

All as per Item No. 92 but drawer made out of prelaminated particle board 18/19 mm thick all as per drg.

All as per Item No. 92 but two horizental shelves at left side equally spaced

All as per Item No. 92 but two magnetic catch spring to the shutter.

All as per Item No. 92 but CP brass handle of size 75 mm .

Removing of old/unserviceable and Supply and fixing new 4 x 10 mm thick RIBS moulded along with seat in single piece and PVC seat 4mm thick with holes & screwed with frame of CHAIR DINING JCO/OR'S of good quality as approved by GE, complete all as specified and directed. Drawing No .FD-FD/MAP-II/05

All as per Item No. 98 but new rear legs of size 55X30X890 mm

All as per Item No. 98 but new stiffner of size 25x20x440mm

All as per Item No. 98 but new front/side/rear rails of size 65x30X440 mm

All as per Item No. 98 but back horizontal rests of size 45x15x405mm made slightly curved in shape out of wooden member of size 50 x 35x 470 mm

Removing of old/unserviceable and Supply and fixing new 75 mm thick 40 density foam seat covered with fabric/tapestry cloth of CHAIR DINING OFFRS, good quality as approved by GE, complete all as specified and directed. Drawing No FD-FD/MAP-II/04

Removing of old faded cushion cover only of a seat or back of SOFA SET 5 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit). Drawing No FD-281/373

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Drawing No FD-281/373

Removing of old faded cushion cover only of a seat or back of SOFA SET 4 SEATER and S&F new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old unserviceable Foam cushion and S & F new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Drawing No. FD-281/373

M & L for replacement of old existing unserviceable wooden members of TALBE 900X600X760MM WITH DRAWAR /WITHOUT DRAWER and S&F of new timber Ist class HW members of new legs of size 60X30X760MM well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drwaing No FD-283/284

All as per Item No. 108 but new rail of size 20x60x600mm

All as per Item No. 108 but new rail of size 20 x 60 x 900 mm

All as per Item No. 108 but Stiffeners of size 25 x 35 x 900 mm

S & F 18 mm thick prelaminated partical board with Phenol formaldehyde IS-12823 exterior grade-II on top of the table Size of the table top shall be 900 x 600mm, 4 mm teak wood edging shall be provided all round the top of the table and apply two coat of french polish to achieve glossy finish.

M & L for replacement of old existing unserviceable wooden members of TEAPOY and supply and fixing of new timber Ist class HW members of new legs of size 60X30X540mm well seasoned free from knots duly planned as directed by Engineer -in-charge and shown in drawing. Drawing No FD-278

All as per Item No. 113 but long rail of size 20x50x600mm

All as per Item No. 113 but top short rail of size 20x50x450mm

All as per Item No. 113 but Siffeners of size 20 x 25 x 600 mm

S & F 18 mm thick prelaminated partical board with Phenol formaldehyde IS-12823 exterior grade-II on the top of the teapoy. Size of the teapoy top shall be 600x450 mm, 4 mm teak wood edging shall be provided all round the top of the teapoy and apply two coat of french polish to achieve glossy finish etc.

Charpoy GI Pipe Ply Top FD-220 &221: M&L for removing of old unserviceable Ply Woood Top and S & F in replacement the new ply wood of Charpoy GI Pipe (FD-220 ) with 12 mm thick commercial BWR (07 No of ply) size 1980 mm x 905 mm on charpoy frame as top fixed with 10 Nos nuts, bolts and washers (3 Nos on each long rail & 2 Nos on each short rail) bolt head counter sunk machine made size 75 mm x 5 mm with 2 Nos nuts & washers on each bolt complete all as shown on drawing, specified and directed.

M&L for removing of old unserviceable mild steel flat iron 25 mm x 4 mm of Charpoy GI Pipe (FD-220 ) fixed with long rail with bolt head counter sunk machine made size 75 mm x 5 mm with 2 Nos nuts & washers on each bolt and applying two coats of synthetic enameled black paint over a coat of red oxide primer to the newly fixed flat iron complete all as specified and directed.

S & F in replacement the new long rail of Charpoy GI Pipe (FD-220) with 32 mm bore GI pipe medium grade ISI marked duly threaded both sides and fixing in the charpoy complete all as shown on drawing, specified and directed.

Cutting the removed long rail from Srl item No. 4.00 here-in-before and making the same to short rail of the charpoy and threading the both ends and fixing the same in the Charpoy GI Pipe (FD-220) complete all as shown on drawing, specified and directed.

Removing old existing unserviceable short rail from Charpoy GI Pipe (FD-220) and cutting the same and making it to the legs of the charpoy 480 mm long and threading the one end and fixing the same in the Charpoy and providing mild steel flat iron 25 mm x 3 mm clamps made to shape and gas welding to the legs including 3 mm thick mild steel plate making it to the round shape of size 3 mm x 50 mm and gas welding to the bottom of the legs of charpoys as shoe to the charpoy including removing old unserviceable legs with clamp and plate complete all as shown on drawing, specified and directed.

S & F in replacement the new check nuts of Charpoy GI Pipe (FD-220) for 32 mm bore GI pipe medium grade check nuts 6 mm wall thickness and fixing in the charpoy complete all as shown on drawing, specified and directed.

S & F in replacement the new elbow of Charpoy GI Pipe (FD-220) for 32 mm bore GI pipe medium grade elbow 3 way weighing not less than 415 gms each ISI marked and fixing in the charpoy complete all as shown on drawing, specified and directed. Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

JOY ENTERPRISE

M/s Pal Builders