SPECIAL REPAIR TO COOLING APPLIANCES AND BR MINOR WORKS AT AF STN MOTHALA AND NALIYA

Amount

Supply and install air cooled split unit Air Conditioners (Copper) electric driven single Phase 230 Volts of capacity of 1.5 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum BEE 5 star rating complete all as specified & directed.

Supply and fix water cooler electric driven ( single phase) having approx storage capaccity of 80 Litre and nominal cooling capacity of 40 Litres per hour and fully stainless steel body complete all as specified & directed.

Supply and install hi wall split units indoor/outdoor of capacity 2.0 TR with copper condensor coil inverter AC complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity complete all as specified & directed.

Dismantling & taking down Split type AC including indoor and outdoor unit, capacity 1.5 TR / 2.0 TR from installed site, transporting to MES store yard and depositing to MES carefully without damaging any part or body complete all as specified & directed.

M & L for transporting refrigerator capacity 286/310 Ltr /water cooler capacity 40/80Ltr/ water dispenser to MES store yard and depositing to MES carefully without damaging any part or body complete all as specified & directed.

Supply install and testing Refrigerator Double door with frost free & compressor, 3 Star rating (minimum) vertical door emboss, Transparent accessories Handle, Direct Cool capacity more than 195 liters upto 310 Ltrs, Antibacterial Door Gasket integrated condenser, energetic freezer. Ecofriendly refrigerant complete all as specified & directed.

Supply install and testing Refrigerator Single door with frost free & compressor, 2 Star rating (minimum) vertical door emboss, Transparent accessories Handle, Direct Cool capacity 190 liters , Antibacterial Door Gasket integrated condenser, energetic freezer. Ecofriendly refrigerant complete all as specified & directed.

Supply and install Cassette type units indoor/outdoor complete with cordless remote control unit, twin rotary compressor, single phase units 220V -240V, 50 Hz of capacity 3.0 TR complete all as specified & directed.

Supply only bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 2 ltrs/hr and tank capacity of 1.5 ltrs, heating capacity 5 ltrs/hr and tank capacity 0.8 ltrs, working in R - 134a refrigerant complete all as specified & directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil complete all as specified & directed.

M&L PCC 1:2:4 type B-2 (by using 40mm graded crushed broken stone aggregate) as in foundation filling and mass concrete complete all as specified & directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates, wind ties etc of Fe410- W(GdeE-250) quality-B complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L for preparation of untreated new surfaces of steel and iron work not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for precast cement concrete block masonary walling with solid blocks of PCC (1:5:8) (20mm graded aggregates), exc 10cm in width and setting in CM (1:6) complete all as specified & directed.

M&L for 15mm thick plastering in cement mortar (1:4) with using WPC @3% of cement including finishing the surfaces even and smooth without using extra cement all as specified and directed. (Note: WPC shall not be measured and paid saparately).

M&L for 100 mm thick plain cement concrete 1: 2: 4 type B-1 (by using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

S&F PVC climbing holds of size 3 inches with different colours and pattern fixing with RCC wall with hold fasteners with suitable nuts upto the height of 15 mtr complete all as specified & directed.

M & L for cement concrete (1:4:8) (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified & directed.

S&F steel work in tubular trusses 80 mm thick medium class incl special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979grade st 240 complete all as specified & directed.

S&F MS Plate 6mm thick plain, cut to shape forming holes and welded to truss and verticle post complete all as specified & directed.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and length exc 5cm an n exc 10cm complete as per specified and directed.

S&F For 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed.

M&L for preparing new steel surfaces of any description exc 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified & directed.

M&L for plates (Plain or chequrred) channels, square cut or notched (ordinary and counter sunk) forming hoiles, without any attachement as Icable duct covering complete all as specified and directed.

M & L for Cement concrete type B1 1:2:4 (20 mm graded aggregate) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

M&L for mild TMT bars dia 10 mm and over cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and nincluding mild steel wire (annealed) not less than 0.90 mm dia or over complete all as specified and directed.

GEE CEE ENTERPRISES

AARTI ENTERPRISES