SPECIAL REPAIR TO POWER SUPPLY (3 PHASE) AT MAFI ILS SHELTER AT AF STN NALIYA

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil, for laying of underground electric cable, pipes etc all as directed and specified.

M & L for sand cushioning for UG cable using dry river bed sand, gently punning down complete all as directed by Engr-In-Charge. Note: For measurement purpose punning thickness shall be considered.

Supply & laying un-reinforced precast concrete cable cover, class LV, Type 1, fiat size 250 mm x 150 mm x 40 mm abetting each other with gap between adjacent slab not exceeding 10mm over under cable for protection.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

M&L for Cutting under road/PCC path and passing GI pipe for cable protection and making good as existing complete all as specified and as directed.

M&L for laying 100 mm bore GI pipe, light grade with all fittings, in crossing road/path and in pole up to junction box including necessary clamping etc. complete all as specified and as directed by Engineer-in-Charge.

Taking out old unserviceable LT cable of any size any type from trench/duct/poles/ roof/pipe etc and keeping aside for segregation of serviceability, serviceable cable will be re-laid at same place or other place as required

Supply, Laying, testing & commissioning of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 185 Sqmm x 4 core including connecting the cables at both ends by providing suitable size aluminium lugs at the termination ends and necessary saddle clamp (heavy duty) all as specified and directed by Engineer-in-Charge.

All as per item No.9 above but of size 50 Sqmm x 4 core.

S & F cable jointing kit for 1.1 KV grade cable for straight through joint (outdoor type) complete with Jointing material heat Shrink type and accessories suitable for 3.5 core XLPE, armoured, Al conductor cable of size 120 to 150 sqmm complete all as specified and directed by Engr-In-Charge.

All as per item No.11 above but of size 185 to 240 sqmm

All as per item No.11 above but of size 70 to 95 sqmm.

Supply, fabricating, testing and commissioning of factory made LT outdoor distribution panel board single door of size 800mm x 800mm x 400mm including locking arrangement cubical type dust and vermin proof, weather proof, aesthetical designed, IP54 degree of ingress protection, fabricated with 3.15mm thick CRCA sheet powder coated of approved colour with front and rear opening including 4 strips of copper bus bar of 400 Amps current carrying capacity insulated with color sleeves, porcelain/epoxy insulators 1100 V, rail channel, cable entry, danger notice plate of 1100 V, angle iron frame of size 50x50x6mm and 60cm grouted in ground and 60cm above GL including necessary excavation, foundation, PCC etc. complete all as specified and directed by Engineer-in-Charge.

Anil Builders

M/S Anil Enterprises