Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83.4 LAccepted-AOC NEAR TARAPUR LAXMI DRIVING SCHOOL TARAPUR MOHANPUR WEST TRIPURA 799211 | WEST TRIPURA | TRIPURA | 799211 | ₹83.4 L Quoted ₹85.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹87.3 L+₹1.5 L (1.72%)Rejected-Finance BHUMIHIN COLONY EAST NOAGAON RANIRBAZAR WEST TRIPURA PIN 799035 | RANIRBAZAR | WEST TRIPURA | TRIPURA | 799035 | ₹87.3 L+₹1.5 L (1.72%) | L2 | Rejected-Finance L2 |
Tender Value
₹81.4 L
EMD Value
₹1.6 L
Closing Date
15 Jun 2026, 3:00 pmClosed
Executive Engineer
O/o The EE, mohanpur Division, PWD(R and B)
DEVELOPMENT WORKS IN THE ELECTRIC CREMATORIUM PREMISES OF MOHANPUR MUNICIPAL COUNCIL DURING THE YEAR 2026-27/SH CARPETING, PAVER BLOCK, SUBMERSIBLE PUMP WITH ALLIED WORK
2026_CEPWD_73606_1
6/B/DNIeT/SE-IV/PWD(RnB)/26-27
Open Tender
Repair and Maintenance Services
Percentage
150 days
Mohanpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹4,000
₹1.6 L
15 Jul 2026
9 Jun 2026
15 Jun 2026
9 Jun 2026
15 Jun 2026
9 Jun 2026
9 Jun 2026 - 15 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | 50 | sqm | 9.4 | ₹470 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | 10.77 | cum | 231.6 | ₹2,494.33 |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | 5.61 | cum | 1,177.3 | ₹6,604.65 |
| 4 | Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering.All work upto plinth level:
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) | 12 | cum | 9,960.7 | ₹1,19,528.4 |
| 5 | Reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
complete above plinth level. (i) Thermo-Mechanically
Treated bars of grade Fe-500D or more | 100 | kg | 103.9 | ₹10,390 |
| 6 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Electric resistance or induction butt welded tubes. Tubular truss 40 mm rafter and purlins | 240.53 | kg | 143.2 | ₹34,443.9 |
| 7 | Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge. (i) 150 mm dia. | 6.1 | mtr | 1,777.7 | ₹10,843.97 |
| 8 | Supply and installation of 10000 GPH submersible
pump with suitable motor considering with 70.00 mtr.
head make of Duke upto the depth of 80 ft to 100 ft
by 65/80/100/125 mm dia GI Pipe welded with GI
flange in/c providing fitting fixing by necessary rubber
washer, nuts & bolts, MS safety clamp etc. as per
required with main switch/ starter with motor in/c
commissioning & total run as per direction of the E.I.C
(G.I Pipe will be paid separately) | 1 | Nos | 27,556.4 | ₹27,556.4 |
| 9Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-incharge ( G.I. pipe will be provided by the agency at his own cost & risk). | |||||
| 9.01 | For 50 mm dia G.I pipe with 10 mm thick GI flange | 4 | nos | 2,756.1 | ₹11,024.4 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_74912.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.36 MB
Tendernotice_2.pdf
PDF • 4.25 MB
d.pdf
Tender Documents • 4.23 MB
BOQ_74912.xls
BOQ • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .