Provn of toilet block and POL store at AF Stn Suryalanka

Amount

GENERAL SUMMARY (Note : Schedule 'A' Part I to VIII are prepriced by MES under Ser No. 2 to 9.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)

Total of Schedule ‘A’ Part I “BUILDING/STRUCTURES ”

Total of Schedule ‘A’ Part II “ SITE CLEARANCE/ EARTHWORK ”

Total of Schedule ‘A’ Part III “INTERNAL ELECTRIFICATION ”

Total of Schedule ‘A’ Part IV “ INTERNAl WATER SUPPLY”

Total of Schedule ‘A’ Part V “ ROAD/ PATH/CULVERT ”

Total of Schedule ‘A’ Part VI “ SEWAGE DISPOSAL ”

Total of Schedule ‘A’ Part VII “FENCING/COMPOUND WALL/ STEEL GATE ”

Total of Schedule ‘A’ Part VIII “EXTERNAL WATER SUPPLY ”

Total of Schedule ‘A’ Part IX “EXTERNAL ELECTRIC SUPPLY ”

Sch 'A' Part- X - MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)

Flame proof junction box with plain cover 4 way, entry size 1" ET, dia 80 MM, depth 40 MM complete all as specified and directed. Make : Cat No SSPL/JB/104 of Shyam Switchgear or equivalent in Sudhir/Crompton/Bajaj

S&F flame proof exhaust fan 305MM (12") sweep, AC 230 V 50 Hz, Motor - 0.25 HP, Speed - 1440 RPM, Single Phase complete all as specified and directed. Make : Cat No SSPL/EF/140 of Shyam Switchgear or equivalent in Sudhir/Crompton/Bajaj

Supply and fix cable jointing kit for 1.1 KV grade cable complete with Jointing material heat Shrink type and accessories suitable for 3 ½ core XLPE, armoured, Al conductor cable of size 120 sqmm,Indoor/Outdoor type For NFS-1 & NFS-II 6 Nos at Each Site

M & L for masonry platform for transformer, of size 1.5m x 1.5m x 1.2m height above ground level and 0.60 m below ground level PCC Blocks in cm 1:6 including excavation and earth work in any type of soil foundation in PCC 1:2:4 type B1 with 20mm graded aggregate 10cm thick at top of the platform over 75mm thick PCC(1:4:8) sub base over approved earth filling and, plastering 20mm thick in cm 1:4 on PCC Blocks walls and applying three coats of white wash etc complete all as directed

Supply, installation, testing & commissioning of 11 KV, 630A, 20 KA - 25KA IP 54 protection out door load beak switch floor mounted suitable for coupling with existing 11KV RMU and equipped with earth switch, fuse tripping mechanism manually operated, with suitable HT HRC fuses 10A, meachanical ON/OFF indication, manual trip push button, control wiring with appropriate colors, bus connection 630A, aluminium bus bar manual trip, earth switch operating port, view glass earth switch interlock to prevent hazardous acess to the fuse links MS Sheet steel enclosure suitable for out door installation lifting hook, provision for receiving incoming/outgoing cables through bottom entry along with adaptor panel/bus bars to extend the bus bar from existing HT panel all as per site requirement complete all as specified and directed. Note : This unit is extension to the existing ABB, CCF+ module.

Supply, installation, commissioning and testing of LT Feeder Pillar Box outdoor type, double door made out of CRCA Sheet of 3.15 mm thick with powder coated painting frame made out of angle iron 45 x 45 x 6 mm and four numbers of 300 Amps aluminum strips / bars duly insulated on insulators / suitable size Bakelite sheet, free space between MCCB / busbar and other connection items should be provided, the space between ground to panel should be 60 cm with PCC foundation for LT Panel, LT panel should be provided with necessary locking arrangement, danger notice sticker, cable glands, internal wiring with FRLS copper wires and comprising and including the following: Incoming: a) MCCB 4 Pole, 160 Amps, 25 kA, Audjustable themral and adjustable magnetic setting. - 01 No. Outgoing: a) MCCB 4 Pole, 100 Amps, 25 kA, Audjustable themral and adjustable magnetic setting. - 02 No. (NFS-1, Spare) b) MCCB 4 Pole, 80 Amps, 25 kA, Audjustable themral and adjustable magnetic setting. - 01 No. (Spare) c) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs

Supply, install, commissioning and testing of three phase four wire ,indoor type oil cooled Ultra Isolation Transformer of capacity 100 KVA , 50 Hz microprocessor based technology , naturally oil cooled, copper wound & designed for following specifications: (i) Ratio 1:1, (ii) Regulation Better than 3.5%, (iii) Efficiency 98 %, (iv) Power Factor 0.8 Lead to .8 Lag, (v) Di-Electric strength 3kv for 60 Sec, (vi) Insulation Resistance Better than 500 Mega Ohms, (vii) Coupling Capacitance 0.01pF for 100 dB, (viii) Leakage Current < 20 Micro Amps, (ix) Common Mode Attenuation 100 db./ 120 db., (x) Operating temperature 0˚ C - 40˚ C Ambient Protections circuit includes Electronic over voltage trip, Electronic under voltage trip, Overload and short circuit protection. Single phasing prevention & cut off Phase reversal protection & cut off Metering LCD type Input voltage P-N Output voltage p-p Load current in all phases frequency complete all as specified and as directed by Engineer in charge. Note: Each at NFS-I & NFS-II

M&L for earth plate marking made up of angle iron 25x25x3 of length not less than 1.0 mtr, (0.5 mtr above GL) fixed with MS plate of 2 mm thick, 300 x 100 mm by welding, with two coats of red oxide paint with one coat of anti corrisive paint of specifed colour and writen "Earth Pit Nos XX, ER Value :____" and fixed complete all as specified and as directed.

Supply and fix cable route indicator made up of MS angle iron 25x25x6 mm of length not less than 0.9mtr (0.3 mtr below GL) fixed in PCC 1:2:4 of size 0.2x0.2x0.3 mtr and at top with round dial of size 5 inch 9mm thick with embossed lettering of "MES LT UG CABLE" or "MES HT UG CABLE" as per Engineer in charge directions coated with red oxide primer and two coats of syntactic enamel paint of Blue colour complete all as specified and as directed.

Disconnecting the existing LT cable from Existing LT Distribution panel, reconnecting the same through Islolation Transformer and Voltage Stabilizer using suitable lugs and heat sink Joint kits any other auxilary items etc. complete all as specified and directed. Note: Joint Kits, voltage Stabilizer and Isloation Tranformer will be measured seperately under respective item of this BOQ

S&F Brass Float Valves including of size 25mm including necessary fittings and accessories for connecting the water tanks complete all as specified and as directed.

M&L for provn of LLDPE Septic tank designed to carry sewage and sullage water including excavation in any type of soil , PCC 1:4:8 below foundation , vent shaft, connection ets complete for 25 Users.

S&F LED bulb 9 Watt, 945lmn, 6500K color temp, B22 base Camp complete all as specified and as directed.

K Eswar Chandra

S R CONSTRUCTIONS

Sri Venkateswara Constructions

M/s SRINIVASA REDDY CONSTRUCTIONS

N V S S K N SIVA PRASAD