General funds

Cutting of open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH. For pipe line trench. Data P.no 166

Bailing of water from pipeline trenches with oil engine driver pump sets including hire charges , fuel charges and wages for driver , helper etc. complete as per APSS and as per directions of Engineer incharge

Collection and Supply of Dust for filling including Cost and coneyance, Spreading, Sectioning etc.consolidation ,with P.R complete.

Supply and delivery of MS and GI specials of approved make including all labour charges etc complete as per directions of departmental authorities.

300mm x 300mm x 300mm MS Tee

300mm x 250mm Reducer

MS Pipe 300mm dia

300mm dia Flanges MAT-06416

250mm dia Flanges MAT-06416

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.

Tailpieces 300mm dia-0.30mts

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.

Mechanical joint (MAT-07959)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

300mm dia MAT-08073

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces

Construction of Masonary sluice valve pits suitable to the sluice valves of size from 300mm dia as per TD No.4/1941

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1")

SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES.

Labour engaged work including all chaerges complete as directed by the departmental authroites

Engaging Welder / Gas Cutter complete as per directions of departmental authorities. (LAB-00041) including welding, flanges, bends and pipe.

Engaging JCB on hire basis including cost of fuel, driver, helper wages. hire charges and conveyance to the work spot including all taxes etc, as directed by the departmental authorities.

Engaging Hydraulic Truck Crane 16T complete.as directed by the departmental authorities.

Cutting C.I./ DI Pipes without water in mains Dia. of pipes in mm as per directions of departmental authorities.

Construction of granular sub-base by providing HBG meterial confirming to Grading-V of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH(5th Revision) as directed by the Engineer-in-Charge

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.