Balance work of 40.00 mtr span double lane Box Girder Bridge at Karada Khad on Rampur Gaura Mashnu Sarahan Jeori road at RD 35.825

Excavation in earth work in hilly area in all heights and depths in all kind of soil by manual/mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution, etcetra and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shal1 be carried, out true to lines, grades, side slopes, width, camber super- elevation and level as shown on the drawings or as directed by the Engineer-in-Charge, inconformity with the requirement of technical specification for Rural Road clause I603.1and1603.2of general conditions for contract to achieve designed formation width including hauling and stacking of material useful for construction at suitable sites and safe disposal and dumping to be arranged by the contractor of unsuitable cut materials in specified manner, trimming, filling.of unevenness, blindage and finishing of the road to specified dimensions, or as directed by the Engineer -in -Charge for smooth riding. The recovery for stones, whether useful or not, for 126.46 cum(one hundred twenty six point four six cubic metre) in all cases,@ rupees 300/- only (Rupees three hundred only) per cubic meter shall be effected on pro-rata basis in all circumstances. Any loss to the public and private property during the course of excavation shall be the absolute. Responsibility of the contractor which shall have to be duly compensated by, him in all cases.

Earth work in excavation for structures in all depths as per drawing and technical Specification clause 305.1 including setting out, construction of shoring and bracing, removal of stumps-and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated . Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in- Charge hauling and stacking of useful materials for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner treaming filling of unevenness blindage and finishing of the road to specified dimension or as directed by the Engineer-in-in-Charge. If the foundation-of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases.

Supplying, fitting, and placing HYSD (Fe 415) bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1600. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than600 mm (Six hundred millimeter) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. The rate including octroi, royality, Malkana, tolltax, or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying back filling with boulder-stones as per specification to a thickness of not less than 600mm (six hundred miillimeter) with similar size towards the soils and bigger size towards the wall and providing over the entire surface behind abutment wing wall return walls; to the full height-compacted to firm condition complete as per drawing and technical specification Rural Road. The rate including octroi, royality, Malkana, toll tax,or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying weep holes or retaining walls/ breast walls 100mm dia (one hundred millimeter) PVC (D-Plast) pipes of working pressure not less than 4.5 Kg ( Four point five Killogram) per sqm. extending through the full width of the structure with slope of 1 (V) : 20 (H) ( one vertical : Twenty. horizontal) towards drawing face complete as per drawing and technical specifications, clause 614, 709, 1204.3.7. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Furnishing and Placing Reinforced/ Pre stressed cement concrete in super-structure as per drawing and Technical Specification PSC Grade M 40 (Grade forty) 20mm (Twenty millimeter nominal size aggregate) for Box Girder. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Plain/ Reinforced Cement Concrete M15 (Grade Fifteen) 40mm (Forty millimeter nominal size of aggregate) in Open Foundation and be low approach slab complete as per Drawing and Technical Specifications. Clause 1500, 1700 & 2100including the cost of formwork. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and Fixing Drainage spouts complete as per drawing and technical specifications Clause 2705. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm (Seventy millimeter) complete as per approved drawings and standard specifications to be installed by the manufacturer/ supplier or their authorized representative ensuring compliance to the manufacturer's instructions for installation. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying 25 mm (Twenty Five millimeter ) thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen pre coated fine grained hard stone chipping of 13.2 mm (Thirteen point two millimeter) nominal size at the rate of 0.005 cum (zero point zero zero five cubic meter) per 10 sqm (ten square meter) and at an approximate spacing of 10 cm (ten centimeter) center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000oC (one thousand degree celcius), protruding 1 mm to 4mm (one millimeter to four millimeter) over mastic surface, all complete as per clause 516. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting complete as per drawing and Technical Specifications including reinforcement complete as per drawing and technical specification. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced Cement Concrete M35 ( Grade Thirty Five) 20mm (Twenty millimeter nominal size aggregate)in Open Foundation complete as per Drawing and Technical Specifications clauses 1500, 1700 & 2100 including the cost of form. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and placing HYSD (Fe 415) bar reinforcement in Foundation complete as per drawings and technical specifications Clauses 1600. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and liftsas per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced cement concrete Grade M 35 (Grade Thirty Five ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 &2200 including the cost of form work. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying Plain/Reinforced cement concrete Grade M 40 (Grade Forty ) 20mm (Twenty millimeter nominal size aggregate) in sub-structure complete as per drawing and Technical Specifications Clause 1500, 1700 & 2200 including the cost of formwork . The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Supplying, fitting and placing HYSD (Fe 415) bar reinforcement in sub structrue complete as per drawings and technical specification Clauses 1600 & 2200.The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Provision of an Reinforced cement concrete crash barrier at the bridge decks & approaches to bridge structures, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming MoRT&H Specification and as per details given IRC-5 including dowel bars, expansion joints filled with pre- moulded asphalt filler board etc. and approved drawing and at locations directed by the Engineer, all as specified. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Reinforced cement concrete approach slab including reinforcement and form work complete as per drawing and Technical specification Section 1500,1600,1700 & 2704. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying bituminous concrete 40mm (Forty millimeter) thick with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30(grade thirty)@ 5.2 Percent (Five point two percent) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and applying 2 (two) coats of water based cement paint to un-plastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre (one litre) for 2 sqm (two square meter) as per drawing and technical specifications Clause 803. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge

Construction of granular sub-base 150mm (one hundred fifty millimeter) by providing granular material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam 150mm (one hundred fifty millimeter) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve desired density by mechanical means and including carriage of materials with in all leads and lifts. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and applying primer coat with bitumen emulsion SS-I on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm (zero point seven zero kilogram per square meter) using mechanical mean as per technical clauses 502The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and applying tack coat with bitumen emulsion RS-I using emulsion pressure distributor at the rate of 0.25 kg (zero point two five kilogram) per sum on the prepared bituminous surface cleaned with mechanical broom as per technical clauses 503 including all leads and lifts as per directions of Engineer- in- Charge. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying dense graded bituminous macadam 50mm (Fifty millimeter) thick with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 (zero point four) Percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. The rate including octroi, royality, Malkana, toll tax, or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and applying tack coat with bitumen emulsion RS-I using emulsion pressure distributor at the rate of 0.20 kg/sqm (zero point two kilogram per square meter) per sum on the prepared bituminous surface cleaned with mechanical broom as per technical clauses 503 including all leads and lifts as per directions of Engineer- in- Charge. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge..

Providing and laying bituminous concrete 30 mm (thirty millimeter) thick with 100-120 TPH (one hundred to one hundred twenty tonne per hour) batch type hot mix plant producing an average output of 75 tonnes (seventy five tonne) per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (Grade thirty) @ 5.4 to 5.6 (five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Earth work in excavation for structures in all depths as per drawing and technical Specification clause 305.1 including setting out, construction of shoring and bracing, removal of stumps-and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated . Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall-be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in- Charge haulingand stacking of useful materials for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner treaming filling of unevenness blindage and finishing of the road to specified dimension or as directed by the Engineer-in-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him in all cases. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Plain/Reinforced Cement Concrete GRADE M15 (Grade fifteen) 40mm (40 millimeter nominal size aggregate) in Open Foundation complete as per Drawing and Technical Specifications clause 1500,1700 & 2100 including the cost of formwork and curing complete. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm (six hundred millimeter) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying weep holes or retaining walls/ breast walls 100mm dia (one hundred millimeter) PVC(D- Plast) pipes of working pressure not less than 4.5 Kg ( Four point five Killograme) per sqm. extending through the full width of the structure with slope of 1 (V) : 20 (H) ( one vertical : Twenty. horizontal) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1204.3.7. The rate including octroi, royality, Malkana, toll tax or other taxes but excluding GST imposed by the Government including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.