Construction of Tehsil office Dangerpora

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work.

Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size) including curing complete including all carriages.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, including all carriages.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Supplying and filling of good earth including digging earth carrying by Mechanical transport , placing, watering, dressing and ramming in layers not over 200mm thick and consolidation with PRR of 8-10 ton capacity including carriage of earth from approved source of supply to site of work complete including Royalty and all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure upto floor V level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Kiln seasoned and chemically treated hollock wood incld carriage

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows(Area of opening for panelled inserts excluding portion inside grroves or rebates to be measured) .Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides.Grade I,Type II IS:12823 marked including all carriages.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes incld carriage.

12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld carriage.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and inluding priming coat with water thinnable cement primer including all carriages.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm), including all carriages.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete, Fixed to openings / wooden frames with rawl plugs screws etc. including all carriages.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown incld carriage complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incld carriage.

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. 18 mm thick incld carriage.

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

roviding Color coated Hi RIB GS Sheet Roofing fixed Polymer Coated Jor L Hooks Bolts AND NUTS 8 mm dia with Bitumen and GI Implet Washers upto A Pitch of 60 Degrees Excl of Purlins ,Rafters ,Trusses.0.50 MM Thick with zinc coating not less than 275G/Sqm incld ridges and Valleys with carriage

Providing and fixing of Wooden Balluster railing 4"x4" Hand Rail and 2.5"x2.5'' Wooden Ballast @ 6" centre incld necessary primer polish etc with carriage.

Providing and fixing of Wooden Ballast Master Piece 5"x5" to be fixed with greaser bolts etc incld primer anf polish with carriage.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications.Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld carriage.

Providing and fixing of Imported Panelling over 12 mm thick Plywood runner and applying a malamine polish of approved quality incld all fixtures.Cornice 3"x3" incld carriage of material upto site of work.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.100x10 mm incld carriage.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete200x10 mm incld carriage.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete. 100 mm incld carriage.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS 4992 with necessary screws etc. complete . 125 mm incld carriage.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete incld carriage.

Centering and shuttering including strutting propping etc. and removal of form for walls (any thickness) incld attached pilasters ,butresses,plinth and string courses etc including all carriages.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps incld carriage.

Providing and fixing toilet paper holder C.P. brass incld carriage.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms incld carriage.

Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia incld carriage.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incld carriage.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms incld carriage.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms incld carriage.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms incld carriage.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge incld carriage.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453x357 mm incld carriage.

Providing and fixing of 100 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage.

Providing and fixing of 75 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage.

Providing and fixing of 40 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage.

Providing and fixing of 75 mm dia Floor Trap of approved Brand ,all fixtures complete with carriage.

Providing and fixing of 100 mm sand cast iron grating for gully trap incld carriage.

Providing and fixing of 100 mm dia PVC Pipes with cowel (Type B) of approved Brand incld allied acessoried and other fittings complete job with carriage.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 20mm OD(SDR-7.4) incld carriage.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , PN-16 pipe, 16mm OD(SDR-7.4) incld carriage.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld carriage.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore incld carriage.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore incld carriage.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood incld carriage.30 mm

Poviding and fixing of approved quality water heater (Geyzer) (Venus / Racold) brand, including sta

ndard quality fixtures and fittings etc; cost and carriage complete 50 ltr Capacity.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) incld carriage.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1 Cement: 3 coarse sand: 6 grade stone aggregate 40mm nominal size) including all carriages.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer incld carriage complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge incld carriage.