Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.2 LAccepted-AOC B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L1 | Accepted-AOC LOWEST AND REASONABLE RATE | |
| 2 | L2₹48.9 L+₹2.0 L (4.27%)Rejected-Finance 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹49.0 L+₹2.1 L (4.41%)Rejected-Finance 74 AJANTA COMMERCIAL CENTRE ASHRAM ROAD AHMEDABAD 380014 | AHMEDABAD | AHMEDABAD | GUJARAT | 380014 | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L4₹49.2 L+₹2.3 L (4.88%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L4 | Rejected-Finance HIGHER RATE | |
| 5 | L5₹49.5 L+₹2.6 L (5.57%)Rejected-Finance | L5 | Rejected-Finance HIGHER RATE |
Tender Value
₹46.1 L
EMD Value
₹92,280
Closing Date
23 Sept 2024, 6:00 pmClosed
GE ARMY BHUJ
BHUJ
PROVN OF THREE HIGH MAST LIGHTS AT CERTAIN LOCATION AND PROVN OF PATHWAY ALONG WITH PERIMETER OF CHILDRENS PARK AND CERTAIN SANCTIONED WORKS AT MIL STN GANDHIDHAM UNDER GE ARMY BHUJ
2024_MES_670738_1
8231
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BHUJ
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE ARMY BHUJ
₹92,280
Yes
28 Nov 2024
3 Sept 2024
25 Sept 2024
3 Sept 2024
23 Sept 2024
16 Sept 2024
Amount
Excavation in post holes (or similar holes ) each n.exc 0.5 cum, getting out in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth aroung, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for pre cast cement concrete Type B1 1:2:4 (20mm graded aggregate) providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:6 complete with joints to match complete all as specified and directed.
M & L for TMT bars 10mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.
Ditto all as per Above item No 5 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders/tempreture bar etc including other works complete all as specified and directed.
M&L for preparation and applying two coats of cement base paint over new plastered surface of wall complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed .
M & L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-Gde E-165 complete all as specified & directed.
M & L for preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over including a coat of red oxide primer complete all as specified & directed.
Dismantling of fencing wire mesh any type complete all as specified & directed .
Supply only, PVC Coated chain link fencing having wire outer dia 5mm and wire mesh size of 50mm x 50mm complete all as specicfied and directed.
Fixing only chain link fencing incliding fline wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.
S & F of 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt & n.exc 5 cm long complete all as specified & as directed.
Supply only Mild Steel round Bar 10 mm dia Grade Fe-290 (Gde E-165) to be fixed as line wires in Chain Link Fencing complete all as specified and as directed.
S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
M & L for preparation of new steel surfaces of any description not exceeding 10cm in width or grith and applying two coats of aluminium paint over and including one coat of red oxide primer complete all as specified and directed.
Supply, fixing & testing of polygonal Hot Dip High galvanized steel mast light of suitable thickness conforms to BSNE 10025 grade of height 20.00 mtr from ground level suitable for 6 to 9 lantern symmetrically fitted along with their control panel consisting of motor of suitable capacity to lift light frame ,motor starter , reverse and forward movement for motor of suitable capacity and compartment should provide inside the mast light and having two point suspension system with stainless steel wire rope of dia 7/19 guage with thimble and terminals and double drum winch operated by motor, self lubricated by means of oil bath ,grooved double drum with gear ratio of 53:1 ,Electrical multi core flexiable power cable with luminaire mounting arm, pully assembly, at mast head cables are connceted to weather proof cast aluminium junction box on the luminiars carriage, aviation obstruction light, lightning arrester spike, including RCC foundation as per manufacture recommendation with blots inserted in concrete including excavation,returning,removing from site ,suitable size rod for reinforcemnt for foundation completely all as specfied and directed. Model No : BMRLMW16M mast light of Bajaj or Equivalent . Note:Drawings of Foundation, High Mast light shall be submitted by contractor from manufacture and same to be approved from Engineer-in-charge.The foundation shall be made as per manufacture drawing.
Supply and fixing LED flood light fitting 170 Watt 230 V AC outdoor type with high pressure dia cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) with stranded aluminium, 1100 volts grade, of size 3.5 core 16 sqmm complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth wire 4mm earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing providing of pre cast concerte pit of exsiting size and painting of earth resitance, Date of test on earth pit complete all as specified and directed.
Supply and fix Granite (of any type) work (table rubbed and polished) in steps for High mast foundation and like in cement mortar (1:4) including pointing in white cement (1:2) us?ing marble dust with admix?ture of pigment to matchwith shade of granite complete all as specified and directed.
M & L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth in hard/dense soil for laying of cable/ GI pipe and getting out complete all as specified and directed.
Returning, filling in including spreading levelling watering well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing surplus soil to a distance outside MD land and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed. Note :- Only compacted thickness of sand will be measured and paid separately.
Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.
Supply and fix street light timer panel of capacity 3 phase, 6KW, IP 54, MCB 40 Amp TPN, contactor of capacity 32A conforming to IS/IEC 61439 &60529 with extended wide bend coil and inbuilt short circuit protection complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15cm and getting out in hard / dense soil complete all as specified and directed.
M & L for hardcore of gauge not exceeding 63 mm of broken stones and boulders deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L of 100 mm thick plain cement concrete type D 2 1;4:8 (Using 40 mm grade stone aggregate) as in sub base complete all as specified and as directed.
M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Removal of excavated surplus material soils to a distance exc 250 m n.exc 500 m and depositing complete all as specified and directed.
M & L for Precast Cement Concrete kerb stones machine pressed factory made in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate and set in CM (1:6) with plain fair faces, including chamfers, weatherings, throating etc. complete all as specified and directed.
Preparation of new or previously untreated concrete and concrete based surfaces and Material & labour for applying two coat of synthetic enamel paint (Ordinary tint) over one coat of priming paints complete all as specified and directed.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
ALBA AC AND REF SERVICES (BID ID -3108439)
Electricals India (BID ID -3108091)
M/s Bombay Novelty Stores (BID ID -3099829)
Shree Builders (BID ID -3106713)
Shreeganesh Construction (BID ID -3106083)
Ramdev and Sons (BID ID -3105987)
ARTI CONSTRUCTION (BID ID -3108692)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .