Construction of Building for accommodating to Unguturu Sub Division office cum Chebrolu Section office at 33/11 KV SS Narayanapuram in Eluru Division of Eluru Circle

Earth work excavation in ordinary soils by manual means upto 3m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Filling with sand in foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

Supplying, cutting and placing HYSD bar reinforcement as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of all materials to site and all labour charges complete.

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge

Brick Masonry in CM (1:5) with Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm including seignorage charges including cost and conveyance of all materials to site and all labour charges complete.

Ground Floor Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete.

First Floor Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete.

Ground Floor 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.

First Floor 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.

Pile Caps RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Plinth beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Lintels RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Lintels RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Columns RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Columns RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Sunshades and chajjas RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Sunshades and chajjas RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Roof Beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Roof Beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Roof Slab RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Roof Slab RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Ground Floor Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Vibrated Plain Cement concrete (1:3:6) using 10 to 12 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

First Floor Vibrated Plain Cement concrete (1:3:6) using 10 to 12 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

Flooring with vitrified polished floor tiles glossy finish premium colours of size not less than 600 x 600 mm and thickness between 8-10 mm of 1st quality(make Somany,HR Jhonson,Naveen Ceramics, Kajaria, Nitco, Sphinx) set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work including the cost of conveyance of all materials.

Flooring with 8mm thick Non-skid red or white full body ceramic tiles Ist quality , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.

Ground Floor Painting with acrylic exterior emulsion paint for external walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of water based cement primer exterior grade II , making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

First Floor Painting with acrylic exterior emulsion paint for external walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of water based cement primer exterior grade II , making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Ground Floor Painting with synthetic polymer plastic emulsion paint for internal walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

First Floor Painting with synthetic polymer plastic emulsion paint for internal walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Providing R.C.C. plates of 38mm thick with R.C.C.(1:1.5:3) (including cost of steel reinforcement ) and plastering with CM(1:5),12mm thick including cost and conveyance of all materials to site and all labour charges complete.

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension, Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm & upto 2.50 sqm), comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Flush door: supply and fixing of 35 mm thick flush door single shutter, solid bond wood block board type with teak veneer on both faces including 5mm thick glass and supplying positioning and fixing door frame with well seasoned assam teak/beeja sal/sal wood scantlings of size 100 mm x 75 mm, including 6 nos. Of ms 'z' hold fasts of size 250x50x8 mm,including aluminium 3 nos. Of 125 mm butt hinges, 1 no. Door stoper, 2 no. 100 mm long door handles , 1 no. Aldrop of size 250 mm long , 1 nos. Of 200 mm long tower bolts, with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work

Supply and Fixing of 25mm outer dia 1.8mm thick rigid P.V.C. pipe (ISI MARK) of make Sudhakar/Macoplast/Modi with all required accessories like bends, junction box with cover etc., including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose and hot dip galvanized metal boxes with cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (makes Anchor / Gold Medal / Million / Vimal / Maru / Milltec.)

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A modular switch control and 3/2 pin sockets with hot dip galvanized box with cover frame on separate board including all labour charges etc., complete.

Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for MAINS Makes: Finolex / RR kabel /Havells/KEI/Polycab/Gloster /Goldmedal/GM inlcuding all labour charges etc., complete.

Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of 4 way TPN distribution board ( STI 4w ) concealed in wall including chisiling, masonry work & suitable for single pole out going MCBs in sheet steel enclosure with 1no. 63 A 4 pole Isolator and 4 Nos 6-32A single pole MCBs including (make Hevels/ MDS ) complete for finished item of work as per directions of Eng-in-charge..

Supply and fixing of 8way TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP with 40A, 4pole isolator as incomer and 10kA-6-32A (12Nos) SP MCBs as out going including internal connection and labour charges for surface / flush mounting etc., complete.

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 -260 Volts, having luminous efficacy >=90 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K 5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: A PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT

Supply of 48" (1200mm) Sweep star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min of makes (Crompton High speed/Bajaj Ultima/Havells Velocity/ Usha Astra/ Orient Summer Pride) with Modular Electronic Regulator of makes (Crab Tree/Feno Swtch/ Toyoma/Fortune Art/ Million / Gold Medal / Vimal / Anchor Roma) including cost and conveyance of all materials and all labor charges for laying of concrete with all leads and lifts and all other incidental charges etc., complete.

Supply and fixing of (7 to 9)W LED Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base.Makes: Phillips /Crompton / Bajaj / Havells / Halonix/ GM/ HPL Syska / Green Lites / Fortune Arrt / GoldMedal / Luker/ Leo/ Orbit /Rhino / GLO LED/ Million/ Victoria/ Benlo/ Goldwyn

Supply and fixing of European Water Closet of Ist quality with plastic seat and lid and low down flushing tank 10 Lit capacity confirming to IS:2556-Part-2-1973 of Hidustan/Neycer or Parry ware make white glazed with 'S' trap. including cost and conveyance of all materials and all labor charges for laying of concrete with all leads and lifts and all other incidental charges etc., complete.

Supply and fixing of 110 mm dia (4kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing of 75 mm dia (6kg/sqcm) double socket PVC/SWR pipes including cost and conveyance of all materials all labour charges etc., complete.

Providing and fixing of Wood Polymer Composite (WPC) solid doors with frame. Door shutter consists of Wood Polymer Composite (WPC) solid, Frosty white single extruded factory made thickness in 18mm thickness (Density 650Kg/Cum, Weight 35Kg) and Door Frame consists of solid Wood Polymer Composite (WPC) singlr extruded section of size with encapsulation of 8mm rigid layer on all the six surfaces. The door frame will have a rebat of 32mm . Door Frame section of size 45x75mm . The Two vertical members are to be joined together with the horizontal member using 8x50mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready / assembled door frame is fixed to the wall using Hold Fast or bolt fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member and with fixtures 1 No Aluminium aldrop 200mm long and 2 Nos Tower Bolt 150mm long the rate is inclusive of all materials cost and conveyance complete for finished item of Work.

Supply and fixing Indian make Flat Back Wash Hand basin with pedestal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets : 550 x 400 mm - double C.P. Pillar cock.

Supply and Fixing of Premium make CPVC Pipes of 1" dia (28.60mm ODPipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007).

Supply and Fixing of Premium make CPVC Pipes of 3/4" dia (22.20mm OD Pipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supply and Fixing of Premium make CPVC Pipes of 1/2" dia (15.90mm OD Pipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supply and fixing CP bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing 1" gate valve including cost of ISI make including cost of all materials and all labour charges for fixing etc., complete.

Supply and fixing of Polyethylene water storage tank double layer conforming to IS:12701-1996 with lid.

Supply, installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,flexible , double ended patch cords 2m/7ft along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Makes: Systimax /AMP/ Panduit/ Siemond/ /Legrand

Supply and fixing of 7 feet length patch cord of makes D Link or equivalent.

Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Supply , Installation, Testing and Comissioning of 9U(44mm)Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. along with Power Spike Make: APW/HCL/Valrack/Netrack

Supply and fixing of 24 Port switches(Non-manageable) of makes D link / CISCO / Net Gear / HP.

Supply and fixing of f 24 port patch panels of makes D Link / AMP / Molex / Legrand / Krone.

Supplying and Fixing 76.2 mm Nahny Trap 1st quality in RCC floors page No.121, Sl No.126)

Providing of RCM facia or drop wall 5cm thick in CM (1:3) including seignorage charges with rabbit wire mesh (chicken mesh) of not less than 30gauge & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, scaffolding charges and all labour charges complete.

Supply, fabrication and fixing of stainless steel railing of approved design with Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for grade -304 including all accessories and all labour charges complete for finished item of work.

Supply and fixing of PVC false ceiling on MS/GI made skeleton framework.The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.

Filling with good gravel in low lying area with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Collection, supply, spreading of quarrydust including cost and conveyance of all materials and all labor charges with all leads and lifts and all other incidental charges etc., complete.

Earth work excavation in ordinary soils by manual means upto 3m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Filling with sand in foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

Supplying, cutting and placing HYSD bar reinforcement as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of all materials to site and all labour charges complete.

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge

Brick Masonry in CM (1:5) with Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm including seignorage charges including cost and conveyance of all materials to site and all labour charges complete.

Ground Floor Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete.

First Floor Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete.

Ground Floor 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.

First Floor 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.

Pile Caps RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Plinth beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Lintels RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Lintels RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Columns RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Columns RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Sunshades and chajjas RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Sunshades and chajjas RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Roof Beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Roof Beams RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Ground Floor Roof Slab RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

First Floor Roof Slab RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Ground Floor Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete..

First Floor Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete..

Ground Floor Vibrated Plain Cement concrete (1:3:6) using 10 to 12 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

First Floor Vibrated Plain Cement concrete (1:3:6) using 10 to 12 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete.

Flooring with vitrified polished floor tiles glossy finish premium colours of size not less than 600 x 600 mm and thickness between 8-10 mm of 1st quality(make Somany,HR Jhonson,Naveen Ceramics, Kajaria, Nitco, Sphinx) set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work including the cost of conveyance of all materials.

Flooring with 8mm thick Non-skid red or white full body ceramic tiles Ist quality , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.

Ground Floor Painting with acrylic exterior emulsion paint for external walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of water based cement primer exterior grade II , making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

First Floor Painting with acrylic exterior emulsion paint for external walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of water based cement primer exterior grade II , making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Ground Floor Painting with synthetic polymer plastic emulsion paint for internal walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

First Floor Painting with synthetic polymer plastic emulsion paint for internal walls having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Providing R.C.C. plates of 38mm thick with R.C.C.(1:1.5:3) (including cost of steel reinforcement ) and plastering with CM(1:5),12mm thick including cost and conveyance of all materials to site and all labour charges complete.

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension, Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm & upto 2.50 sqm), comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Flush door: supply and fixing of 35 mm thick flush door single shutter, solid bond wood block board type with teak veneer on both faces including 5mm thick glass and supplying positioning and fixing door frame with well seasoned assam teak/beeja sal/sal wood scantlings of size 100 mm x 75 mm, including 6 nos. Of ms 'z' hold fasts of size 250x50x8 mm,including aluminium 3 nos. Of 125 mm butt hinges, 1 no. Door stoper, 2 no. 100 mm long door handles , 1 no. Aldrop of size 250 mm long , 1 nos. Of 200 mm long tower bolts, with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work

Supply and Fixing of 25mm outer dia 1.8mm thick rigid P.V.C. pipe (ISI MARK) of make Sudhakar/Macoplast/Modi with all required accessories like bends, junction box with cover etc., including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose and hot dip galvanized metal boxes with cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (makes Anchor / Gold Medal / Million / Vimal / Maru / Milltec.)

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A modular switch control and 3/2 pin sockets with hot dip galvanized box with cover frame on separate board including all labour charges etc., complete.

Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for MAINS Makes: Finolex / RR kabel /Havells/KEI/Polycab/Gloster /Goldmedal/GM inlcuding all labour charges etc., complete.

Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of 4 way TPN distribution board ( STI 4w ) concealed in wall including chisiling, masonry work & suitable for single pole out going MCBs in sheet steel enclosure with 1no. 63 A 4 pole Isolator and 4 Nos 6-32A single pole MCBs including (make Hevels/ MDS ) complete for finished item of work as per directions of Eng-in-charge..

Supply and fixing of 8way TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP with 40A, 4pole isolator as incomer and 10kA-6-32A (12Nos) SP MCBs as out going including internal connection and labour charges for surface / flush mounting etc., complete.

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 -260 Volts, having luminous efficacy >=90 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K 5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: A PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT

Supply of 48" (1200mm) Sweep star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min of makes (Crompton High speed/Bajaj Ultima/Havells Velocity/ Usha Astra/ Orient Summer Pride) with Modular Electronic Regulator of makes (Crab Tree/Feno Swtch/ Toyoma/Fortune Art/ Million / Gold Medal / Vimal / Anchor Roma) including cost and conveyance of all materials and all labor charges for laying of concrete with all leads and lifts and all other incidental charges etc., complete.

Supply and fixing of (7 to 9)W LED Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base.Makes: Phillips /Crompton / Bajaj / Havells / Halonix/ GM/ HPL Syska / Green Lites / Fortune Arrt / GoldMedal / Luker/ Leo/ Orbit /Rhino / GLO LED/ Million/ Victoria/ Benlo/ Goldwyn

Supply and fixing of European Water Closet of Ist quality with plastic seat and lid and low down flushing tank 10 Lit capacity confirming to IS:2556-Part-2-1973 of Hidustan/Neycer or Parry ware make white glazed with 'S' trap. including cost and conveyance of all materials and all labor charges for laying of concrete with all leads and lifts and all other incidental charges etc., complete.

Supply and fixing of 110 mm dia (4kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing of 75 mm dia (6kg/sqcm) double socket PVC/SWR pipes including cost and conveyance of all materials all labour charges etc., complete.

Providing and fixing of Wood Polymer Composite (WPC) solid doors with frame. Door shutter consists of Wood Polymer Composite (WPC) solid, Frosty white single extruded factory made thickness in 18mm thickness (Density 650Kg/Cum, Weight 35Kg) and Door Frame consists of solid Wood Polymer Composite (WPC) singlr extruded section of size with encapsulation of 8mm rigid layer on all the six surfaces. The door frame will have a rebat of 32mm . Door Frame section of size 45x75mm . The Two vertical members are to be joined together with the horizontal member using 8x50mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready / assembled door frame is fixed to the wall using Hold Fast or bolt fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member and with fixtures 1 No Aluminium aldrop 200mm long and 2 Nos Tower Bolt 150mm long the rate is inclusive of all materials cost and conveyance complete for finished item of Work.

Supply and fixing Indian make Flat Back Wash Hand basin with pedestal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets : 550 x 400 mm - double C.P. Pillar cock.

Supply and Fixing of Premium make CPVC Pipes of 1" dia (28.60mm ODPipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007).

Supply and Fixing of Premium make CPVC Pipes of 3/4" dia (22.20mm OD Pipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supply and Fixing of Premium make CPVC Pipes of 1/2" dia (15.90mm OD Pipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)

Supply and fixing CP bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing 1" gate valve including cost of ISI make including cost of all materials and all labour charges for fixing etc., complete.

Supply and fixing of Polyethylene water storage tank double layer conforming to IS:12701-1996 with lid.

Supply, installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,flexible , double ended patch cords 2m/7ft along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Makes: Systimax /AMP/ Panduit/ Siemond/ /Legrand

Supply and fixing of 7 feet length patch cord of makes D Link or equivalent.

Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Supply , Installation, Testing and Comissioning of 9U(44mm)Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. along with Power Spike Make: APW/HCL/Valrack/Netrack

Supply and fixing of 24 Port switches(Non-manageable) of makes D link / CISCO / Net Gear / HP.

Supply and fixing of f 24 port patch panels of makes D Link / AMP / Molex / Legrand / Krone.

Supplying and Fixing 76.2 mm Nahny Trap 1st quality in RCC floors page No.121, Sl No.126)

Providing of RCM facia or drop wall 5cm thick in CM (1:3) including seignorage charges with rabbit wire mesh (chicken mesh) of not less than 30gauge & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, scaffolding charges and all labour charges complete.

Supply, fabrication and fixing of stainless steel railing of approved design with Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for grade -304 including all accessories and all labour charges complete for finished item of work.

Supply and fixing of PVC false ceiling on MS/GI made skeleton framework.The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.

Filling with good gravel in low lying area with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Collection, supply, spreading of quarrydust including cost and conveyance of all materials and all labor charges with all leads and lifts and all other incidental charges etc., complete.