Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.9 LAccepted-AOC | 1 | Accepted-AOC AOC | |
| 2 | 2₹41.3 L+₹1.4 L (3.64%)Rejected-Finance C 103 UGATI HEIGHTS NR SWAGAT RAINFOREST 1 KUDASAN POR RAO KUDASAN GANDHINAAGR 382421 GUJARAT | AHMADABAD | GUJARAT | 382421 | 2 | Rejected-Finance NOT L1 | |
| 3 | 3₹42.9 L+₹3.1 L (7.78%)Rejected-Finance | 3 | Rejected-Finance NOT L1 | |
| 4 | 4₹47.4 L+₹7.6 L (19.1%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | 4 | Rejected-Finance NOT L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Jul 2022, 6:00 pmClosed
GE ARMY BHUJ
GE ARMY BHUJ
REPAIRS TO DRAIN ,FENCING,COMPOUND WALL AND HARDSTANDING AT UNIT LINES OTM ACCN,MD ACCN INCLUDING MES INSTALLATION UNDER AGE (B/R-I) AT MIL STN BHUJ
2022_MES_528925_1
8921
Open Tender
Civil Works
Item Rate
180 days
ARMY AREA BHUJ
REFER TENDER
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹90,000
Yes
13 Nov 2022
6 Jun 2022
5 Jul 2022
6 Jun 2022
4 Jul 2022
22 Jun 2022
Amount
Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface.
M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete.
S& F MS angle confirming to Fe-290 or Fe-310- for fixing chain link fencing including embading in concreate, cutting top to shapeas directed , drilling holes matching for wire, bendingf in required angle etc. all as disrected
S&F PVC coated Chain link fencing of mesh size 100x100mm , diameter of wire not less than 3.0 mm and weight not less than 1.43Kg/Sqm complete all as specified and directed. (Note:- A BOO will be order for acetain the weight of chain link fencing after word the fencing will be used in the above works))
Supply only for chain link fencing made out of 4mm dia galvanised iron wire of mess 75mmx75mm size, made upto into mattress or cage, straining and fixing all as directed.
Fixing only Chain link fencing including line wires ,any mess ,size and type fixed to any type of standards ,rails,straining bolts etc including provision of binding wire complete all as specified and directed.
M&L mild steel flat iron (for securing wire mesh) bolt embedded in concrete including drilling bolts matching for wire including all necessary work and steel confirming to FE-410-0 or FE-310-0.
M&L preparation of new surfaces of steel and providing 2 coat of Synthetic enamel paint over one coat primer n.exc 10cm in girth
M&L for MS bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking endss and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165).
Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long
M&L galvenised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc as directed.
Preparation of new iron and steel surfaces of any description over 10cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc. , including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Taking down barbed wire any specification.
Dismantling fencing wire mesh, any type
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.
S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.
Dismantling plain or corrugated A/C or steel sheeting, any guage of any description and in any position as in roof coverings and S &F for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in ridge etc fixed with L or J hooks all as specified and directed.
M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 complete all as directed
Material and labour for 60 mm thick, machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment , having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications , complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair all as speificed
M&L Sand Filling a layer of 25mm thick sand cushioning including filling the joints with sand as in floors/ paths including watering and consolidation
Excavation in trenches not exc 1.5 mtr depth for foundation etc n.exe 10sqm on plan in and getting out in hard dense soil.
M/L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation, filling and mass concrete, levelling course etc.
Returning filling in including spreading, levelling, watering and well ramming in layer nexc 25 cm in soil
Removing excavated material soil n.exc. 500m and depositing where as directed
Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished even & smooth without unsing extra cement
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls
M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for vitrified paver color tiles 30cm x 30cm x 25mm thick,moulded set and jointed and pointed in neat cement slurry with grey cement and pigment ,in floors ,over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed
M & L for precast cement concrete louvers/jallies,jafri wall of 35mm thick measured solid including moulding and fixing of any type all as specified and directed
Taking out existing old kerb stones and M&L for factory made precast machine pressed kerd stones of PCC grade M-15 design mix and of shape and size rected, set jointed and pointed cement and sand mortar 1:4 fixed in repairs with and including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of dispodal of rubbish complete all as specified and directed. Sizes shall be as under :- Length (L) not less than 300mm, Height (H) 300mm to 350mm, Thickness (T) 100mm and radius (R) 75mm including painting on kerb stone of synthetic enamel paint yellow or white colour.
Gayatri Construction Co
machine vision plus
M/s Bombay Novelty Stores
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .